!!$ !!$ !!$ MLD2P4 version 2.0 !!$ MultiLevel Domain Decomposition Parallel Preconditioners Package !!$ based on PSBLAS (Parallel Sparse BLAS version 3.3) !!$ !!$ (C) Copyright 2008, 2010, 2012, 2015 !!$ !!$ Salvatore Filippone University of Rome Tor Vergata !!$ Alfredo Buttari CNRS-IRIT, Toulouse !!$ Pasqua D'Ambra ICAR-CNR, Naples !!$ Daniela di Serafino Second University of Naples !!$ !!$ Redistribution and use in source and binary forms, with or without !!$ modification, are permitted provided that the following conditions !!$ are met: !!$ 1. Redistributions of source code must retain the above copyright !!$ notice, this list of conditions and the following disclaimer. !!$ 2. Redistributions in binary form must reproduce the above copyright !!$ notice, this list of conditions, and the following disclaimer in the !!$ documentation and/or other materials provided with the distribution. !!$ 3. The name of the MLD2P4 group or the names of its contributors may !!$ not be used to endorse or promote products derived from this !!$ software without specific written permission. !!$ !!$ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS !!$ ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED !!$ TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR !!$ PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE MLD2P4 GROUP OR ITS CONTRIBUTORS !!$ BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR !!$ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF !!$ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS !!$ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN !!$ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) !!$ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE !!$ POSSIBILITY OF SUCH DAMAGE. !!$ !!$ ! File: mld_cprecset.f90 ! ! Subroutine: mld_cprecseti ! Version: complex ! ! This routine sets the integer parameters defining the preconditioner. More ! precisely, the integer parameter identified by 'what' is assigned the value ! contained in 'val'. ! For the multilevel preconditioners, the levels are numbered in increasing ! order starting from the finest one, i.e. level 1 is the finest level. ! ! To set character and complex parameters, see mld_cprecsetc and mld_cprecsetr, ! respectively. ! ! ! Arguments: ! p - type(mld_cprec_type), input/output. ! The preconditioner data structure. ! what - integer, input. ! The number identifying the parameter to be set. ! A mnemonic constant has been associated to each of these ! numbers, as reported in the MLD2P4 User's and Reference Guide. ! val - integer, input. ! The value of the parameter to be set. The list of allowed ! values is reported in the MLD2P4 User's and Reference Guide. ! info - integer, output. ! Error code. ! ilev - integer, optional, input. ! For the multilevel preconditioner, the level at which the ! preconditioner parameter has to be set. ! If nlev is not present, the parameter identified by 'what' ! is set at all the appropriate levels. ! ! NOTE: currently, the use of the argument ilev is not "safe" and is reserved to ! MLD2P4 developers. Indeed, by using ilev it is possible to set different values ! of the same parameter at different levels 1,...,nlev-1, even in cases where ! the parameter must have the same value at all the levels but the coarsest one. ! For this reason, the interface mld_precset to this routine has been built in ! such a way that ilev is not visible to the user (see mld_prec_mod.f90). ! subroutine mld_ccprecseti(p,what,val,info,ilev,pos) use psb_base_mod use mld_c_prec_mod, mld_protect_name => mld_ccprecseti use mld_c_jac_smoother use mld_c_as_smoother use mld_c_diag_solver use mld_c_ilu_solver use mld_c_id_solver use mld_c_gs_solver #if defined(HAVE_SLU_) use mld_c_slu_solver #endif #if defined(HAVE_MUMPS_) use mld_c_mumps_solver #endif implicit none ! Arguments class(mld_cprec_type), intent(inout) :: p character(len=*), intent(in) :: what integer(psb_ipk_), intent(in) :: val integer(psb_ipk_), intent(out) :: info integer(psb_ipk_), optional, intent(in) :: ilev character(len=*), optional, intent(in) :: pos ! Local variables integer(psb_ipk_) :: ilev_, nlev_ character(len=*), parameter :: name='mld_precseti' info = psb_success_ if (.not.allocated(p%precv)) then info = 3111 write(psb_err_unit,*) name,& & ': Error: uninitialized preconditioner,',& &' should call MLD_PRECINIT' return endif nlev_ = size(p%precv) if (present(ilev)) then ilev_ = ilev else ilev_ = 1 end if if ((ilev_<1).or.(ilev_ > nlev_)) then info = -1 write(psb_err_unit,*) name,& &': Error: invalid ILEV/NLEV combination',ilev_, nlev_ return endif if (psb_toupper(what) == 'COARSE_AGGR_SIZE') then p%coarse_aggr_size = max(val,-1) return end if ! ! Set preconditioner parameters at level ilev. ! if (present(ilev)) then if (ilev_ == 1) then ! ! Rules for fine level are slightly different. ! call p%precv(ilev_)%set(what,val,info,pos=pos) else if (ilev_ > 1) then select case(psb_toupper(what)) case('SMOOTHER_TYPE','SUB_SOLVE','SMOOTHER_SWEEPS',& & 'ML_TYPE','AGGR_ALG','AGGR_ORD',& & 'AGGR_KIND','SMOOTHER_POS','AGGR_OMEGA_ALG',& & 'AGGR_EIG','SMOOTHER_SWEEPS_PRE',& & 'SMOOTHER_SWEEPS_POST',& & 'SUB_RESTR','SUB_PROL', & & 'SUB_REN','SUB_OVR','SUB_FILLIN',& & 'COARSE_MAT') call p%precv(ilev_)%set(what,val,info,pos=pos) case('COARSE_SUBSOLVE') if (ilev_ /= nlev_) then write(psb_err_unit,*) name,& & ': Error: Inconsistent specification of WHAT vs. ILEV' info = -2 return end if call p%precv(ilev_)%set('SUB_SOLVE',val,info,pos=pos) case('COARSE_SOLVE') if (ilev_ /= nlev_) then write(psb_err_unit,*) name,& & ': Error: Inconsistent specification of WHAT vs. ILEV' info = -2 return end if if (nlev_ > 1) then call p%precv(nlev_)%set('COARSE_SOLVE',val,info,pos=pos) select case (val) case(mld_bjac_) call p%precv(nlev_)%set('SMOOTHER_TYPE',mld_bjac_,info,pos=pos) #if defined(HAVE_SLU_) call p%precv(nlev_)%set('SUB_SOLVE',mld_slu_,info,pos=pos) #elif defined(HAVE_MUMPS_) call p%precv(nlev_)%set('SUB_SOLVE',mld_mumps_,info,pos=pos) #else call p%precv(nlev_)%set('SUB_SOLVE',mld_ilu_n_,info,pos=pos) #endif call p%precv(nlev_)%set('COARSE_MAT',mld_distr_mat_,info) case(mld_umf_, mld_slu_,mld_ilu_n_, mld_ilu_t_,mld_milu_n_) call p%precv(nlev_)%set('SMOOTHER_TYPE',mld_bjac_,info,pos=pos) call p%precv(nlev_)%set('SUB_SOLVE',val,info,pos=pos) call p%precv(nlev_)%set('COARSE_MAT',mld_repl_mat_,info,pos=pos) case(mld_sludist_,mld_mumps_) call p%precv(nlev_)%set('SMOOTHER_TYPE',mld_bjac_,info,pos=pos) call p%precv(nlev_)%set('SUB_SOLVE',val,info,pos=pos) call p%precv(nlev_)%set('COARSE_MAT',mld_distr_mat_,info,pos=pos) case(mld_jac_) call p%precv(nlev_)%set('SMOOTHER_TYPE',mld_bjac_,info,pos=pos) call p%precv(nlev_)%set('SUB_SOLVE',mld_diag_scale_,info,pos=pos) call p%precv(nlev_)%set('COARSE_MAT',mld_distr_mat_,info,pos=pos) end select endif case('COARSE_SWEEPS') if (ilev_ /= nlev_) then write(psb_err_unit,*) name,& & ': Error: Inconsistent specification of WHAT vs. ILEV' info = -2 return end if call p%precv(nlev_)%set('SMOOTHER_SWEEPS',val,info,pos=pos) case('COARSE_FILLIN') if (ilev_ /= nlev_) then write(psb_err_unit,*) name,& & ': Error: Inconsistent specification of WHAT vs. ILEV' info = -2 return end if call p%precv(nlev_)%set('SUB_FILLIN',val,info,pos=pos) case default call p%precv(ilev_)%set(what,val,info,pos=pos) end select endif else if (.not.present(ilev)) then ! ! ilev not specified: set preconditioner parameters at all the appropriate ! levels ! select case(psb_toupper(trim(what))) case('SUB_SOLVE','SUB_RESTR','SUB_PROL',& & 'SUB_REN','SUB_OVR','SUB_FILLIN',& & 'SMOOTHER_SWEEPS','SMOOTHER_TYPE') do ilev_=1,max(1,nlev_-1) call p%precv(ilev_)%set(what,val,info,pos=pos) if (info /= 0) return end do case('ML_TYPE','AGGR_ALG','AGGR_ORD','AGGR_KIND',& & 'SMOOTHER_SWEEPS_PRE','SMOOTHER_SWEEPS_POST',& & 'SMOOTHER_POS','AGGR_OMEGA_ALG',& & 'AGGR_EIG','AGGR_FILTER') do ilev_=1,nlev_ call p%precv(ilev_)%set(what,val,info,pos=pos) if (info /= 0) return end do case('COARSE_MAT') if (nlev_ > 1) then call p%precv(nlev_)%set('COARSE_MAT',val,info,pos=pos) end if case('COARSE_SOLVE') if (nlev_ > 1) then call p%precv(nlev_)%set('COARSE_SOLVE',val,info,pos=pos) select case (val) case(mld_bjac_) call p%precv(nlev_)%set('SMOOTHER_TYPE',mld_bjac_,info,pos=pos) #if defined(HAVE_SLU_) call p%precv(nlev_)%set('SUB_SOLVE',mld_slu_,info,pos=pos) #elif defined(HAVE_MUMPS_) call p%precv(nlev_)%set('SUB_SOLVE',mld_mumps_,info,pos=pos) #else call p%precv(nlev_)%set('SUB_SOLVE',mld_ilu_n_,info,pos=pos) #endif call p%precv(nlev_)%set('COARSE_MAT',mld_distr_mat_,info) case(mld_umf_, mld_slu_,mld_ilu_n_, mld_ilu_t_,mld_milu_n_) call p%precv(nlev_)%set('SMOOTHER_TYPE',mld_bjac_,info,pos=pos) call p%precv(nlev_)%set('SUB_SOLVE',val,info,pos=pos) call p%precv(nlev_)%set('COARSE_MAT',mld_repl_mat_,info,pos=pos) case(mld_sludist_,mld_mumps_) call p%precv(nlev_)%set('SMOOTHER_TYPE',mld_bjac_,info,pos=pos) call p%precv(nlev_)%set('SUB_SOLVE',val,info,pos=pos) call p%precv(nlev_)%set('COARSE_MAT',mld_distr_mat_,info,pos=pos) case(mld_jac_) call p%precv(nlev_)%set('SMOOTHER_TYPE',mld_bjac_,info,pos=pos) call p%precv(nlev_)%set('SUB_SOLVE',mld_diag_scale_,info,pos=pos) call p%precv(nlev_)%set('COARSE_MAT',mld_distr_mat_,info,pos=pos) end select endif case('COARSE_SUBSOLVE') if (nlev_ > 1) then call p%precv(nlev_)%set('SUB_SOLVE',val,info,pos=pos) endif case('COARSE_SWEEPS') if (nlev_ > 1) then call p%precv(nlev_)%set('SMOOTHER_SWEEPS',val,info,pos=pos) end if case('COARSE_FILLIN') if (nlev_ > 1) then call p%precv(nlev_)%set('SUB_FILLIN',val,info,pos=pos) end if case default do ilev_=1,nlev_ call p%precv(ilev_)%set(what,val,info,pos=pos) end do end select endif end subroutine mld_ccprecseti ! ! Subroutine: mld_cprecsetc ! Version: complex ! ! This routine sets the character parameters defining the preconditioner. More ! precisely, the character parameter identified by 'what' is assigned the value ! contained in 'val'. ! For the multilevel preconditioners, the levels are numbered in increasing ! order starting from the finest one, i.e. level 1 is the finest level. ! ! To set integer and complex parameters, see mld_cprecseti and mld_cprecsetr, ! respectively. ! ! ! Arguments: ! p - type(mld_cprec_type), input/output. ! The preconditioner data structure. ! what - integer, input. ! The number identifying the parameter to be set. ! A mnemonic constant has been associated to each of these ! numbers, as reported in the MLD2P4 User's and Reference Guide. ! string - character(len=*), input. ! The value of the parameter to be set. The list of allowed ! values is reported in the MLD2P4 User's and Reference Guide. ! info - integer, output. ! Error code. ! ilev - integer, optional, input. ! For the multilevel preconditioner, the level at which the ! preconditioner parameter has to be set. ! If nlev is not present, the parameter identified by 'what' ! is set at all the appropriate levels. ! ! NOTE: currently, the use of the argument ilev is not "safe" and is reserved to ! MLD2P4 developers. Indeed, by using ilev it is possible to set different values ! of the same parameter at different levels 1,...,nlev-1, even in cases where ! the parameter must have the same value at all the levels but the coarsest one. ! For this reason, the interface mld_precset to this routine has been built in ! such a way that ilev is not visible to the user (see mld_prec_mod.f90). ! subroutine mld_ccprecsetc(p,what,string,info,ilev,pos) use psb_base_mod use mld_c_prec_mod, mld_protect_name => mld_ccprecsetc implicit none ! Arguments class(mld_cprec_type), intent(inout) :: p character(len=*), intent(in) :: what character(len=*), intent(in) :: string integer(psb_ipk_), intent(out) :: info integer(psb_ipk_), optional, intent(in) :: ilev character(len=*), optional, intent(in) :: pos ! Local variables integer(psb_ipk_) :: ilev_, nlev_,val character(len=*), parameter :: name='mld_precsetc' info = psb_success_ if (.not.allocated(p%precv)) then info = 3111 return endif nlev_ = size(p%precv) if (present(ilev)) then ilev_ = ilev else ilev_ = 1 end if if ((ilev_<1).or.(ilev_ > nlev_)) then write(psb_err_unit,*) name,& & ': Error: invalid ILEV/NLEV combination',ilev_, nlev_ info = -1 return endif val = mld_stringval(string) if (val >=0) then call p%set(what,val,info,ilev=ilev,pos=pos) else call p%precv(ilev_)%set(what,string,info,pos=pos) end if end subroutine mld_ccprecsetc ! ! Subroutine: mld_cprecsetr ! Version: complex ! ! This routine sets the complex parameters defining the preconditioner. More ! precisely, the complex parameter identified by 'what' is assigned the value ! contained in 'val'. ! For the multilevel preconditioners, the levels are numbered in increasing ! order starting from the finest one, i.e. level 1 is the finest level. ! ! To set integer and character parameters, see mld_cprecseti and mld_cprecsetc, ! respectively. ! ! Arguments: ! p - type(mld_cprec_type), input/output. ! The preconditioner data structure. ! what - integer, input. ! The number identifying the parameter to be set. ! A mnemonic constant has been associated to each of these ! numbers, as reported in the MLD2P4 User's and Reference Guide. ! val - real(psb_spk_), input. ! The value of the parameter to be set. The list of allowed ! values is reported in the MLD2P4 User's and Reference Guide. ! info - integer, output. ! Error code. ! ilev - integer, optional, input. ! For the multilevel preconditioner, the level at which the ! preconditioner parameter has to be set. ! If nlev is not present, the parameter identified by 'what' ! is set at all the appropriate levels. ! ! NOTE: currently, the use of the argument ilev is not "safe" and is reserved to ! MLD2P4 developers. Indeed, by using ilev it is possible to set different values ! of the same parameter at different levels 1,...,nlev-1, even in cases where ! the parameter must have the same value at all the levels but the coarsest one. ! For this reason, the interface mld_precset to this routine has been built in ! such a way that ilev is not visible to the user (see mld_prec_mod.f90). ! subroutine mld_ccprecsetr(p,what,val,info,ilev,pos) use psb_base_mod use mld_c_prec_mod, mld_protect_name => mld_ccprecsetr implicit none ! Arguments class(mld_cprec_type), intent(inout) :: p character(len=*), intent(in) :: what real(psb_spk_), intent(in) :: val integer(psb_ipk_), intent(out) :: info integer(psb_ipk_), optional, intent(in) :: ilev character(len=*), optional, intent(in) :: pos ! Local variables integer(psb_ipk_) :: ilev_,nlev_ real(psb_spk_) :: thr character(len=*), parameter :: name='mld_precsetr' info = psb_success_ if (present(ilev)) then ilev_ = ilev else ilev_ = 1 end if if (.not.allocated(p%precv)) then write(psb_err_unit,*) name,& &': Error: uninitialized preconditioner,',& &' should call MLD_PRECINIT' info = 3111 return endif nlev_ = size(p%precv) if ((ilev_<1).or.(ilev_ > nlev_)) then write(psb_err_unit,*) name,& & ': Error: invalid ILEV/NLEV combination',& & ilev_, nlev_ info = -1 return endif ! ! Set preconditioner parameters at level ilev. ! if (present(ilev)) then call p%precv(ilev_)%set(what,val,info,pos=pos) else if (.not.present(ilev)) then ! ! ilev not specified: set preconditioner parameters at all the appropriate levels ! select case(psb_toupper(what)) case('COARSE_ILUTHRS') ilev_=nlev_ call p%precv(ilev_)%set('SUB_ILUTHRS',val,info,pos=pos) case('AGGR_THRESH') thr = val do ilev_ = 2, nlev_ call p%precv(ilev_)%set('AGGR_THRESH',thr,info,pos=pos) thr = thr * p%precv(ilev_)%parms%aggr_scale end do case default do ilev_=1,nlev_ call p%precv(ilev_)%set(what,val,info,pos=pos) end do end select endif end subroutine mld_ccprecsetr