!!$ !!$ !!$ MLD2P4 version 2.0 !!$ MultiLevel Domain Decomposition Parallel Preconditioners Package !!$ based on PSBLAS (Parallel Sparse BLAS version 3.0) !!$ !!$ (C) Copyright 2008,2009,2010,2012 !!$ !!$ Salvatore Filippone University of Rome Tor Vergata !!$ Alfredo Buttari CNRS-IRIT, Toulouse !!$ Pasqua D'Ambra ICAR-CNR, Naples !!$ Daniela di Serafino Second University of Naples !!$ !!$ Redistribution and use in source and binary forms, with or without !!$ modification, are permitted provided that the following conditions !!$ are met: !!$ 1. Redistributions of source code must retain the above copyright !!$ notice, this list of conditions and the following disclaimer. !!$ 2. Redistributions in binary form must reproduce the above copyright !!$ notice, this list of conditions, and the following disclaimer in the !!$ documentation and/or other materials provided with the distribution. !!$ 3. The name of the MLD2P4 group or the names of its contributors may !!$ not be used to endorse or promote products derived from this !!$ software without specific written permission. !!$ !!$ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS !!$ ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED !!$ TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR !!$ PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE MLD2P4 GROUP OR ITS CONTRIBUTORS !!$ BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR !!$ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF !!$ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS !!$ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN !!$ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) !!$ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE !!$ POSSIBILITY OF SUCH DAMAGE. !!$ !!$ ! File: mld_dprecset.f90 ! ! Subroutine: mld_dprecseti ! Version: real ! ! This routine sets the integer parameters defining the preconditioner. More ! precisely, the integer parameter identified by 'what' is assigned the value ! contained in 'val'. ! For the multilevel preconditioners, the levels are numbered in increasing ! order starting from the finest one, i.e. level 1 is the finest level. ! ! To set character and real parameters, see mld_dprecsetc and mld_dprecsetr, ! respectively. ! ! ! Arguments: ! p - type(mld_dprec_type), input/output. ! The preconditioner data structure. ! what - integer, input. ! The number identifying the parameter to be set. ! A mnemonic constant has been associated to each of these ! numbers, as reported in the MLD2P4 User's and Reference Guide. ! val - integer, input. ! The value of the parameter to be set. The list of allowed ! values is reported in the MLD2P4 User's and Reference Guide. ! info - integer, output. ! Error code. ! ilev - integer, optional, input. ! For the multilevel preconditioner, the level at which the ! preconditioner parameter has to be set. ! If nlev is not present, the parameter identified by 'what' ! is set at all the appropriate levels. ! ! NOTE: currently, the use of the argument ilev is not "safe" and is reserved to ! MLD2P4 developers. Indeed, by using ilev it is possible to set different values ! of the same parameter at different levels 1,...,nlev-1, even in cases where ! the parameter must have the same value at all the levels but the coarsest one. ! For this reason, the interface mld_precset to this routine has been built in ! such a way that ilev is not visible to the user (see mld_prec_mod.f90). ! subroutine mld_dprecseti(p,what,val,info,ilev) use psb_base_mod use mld_d_prec_mod, mld_protect_name => mld_dprecseti use mld_d_jac_smoother use mld_d_as_smoother use mld_d_diag_solver use mld_d_ilu_solver use mld_d_id_solver #if defined(HAVE_UMF_) use mld_d_umf_solver #endif #if defined(HAVE_SLU_) use mld_d_slu_solver #endif implicit none ! Arguments type(mld_dprec_type), intent(inout) :: p integer, intent(in) :: what integer, intent(in) :: val integer, intent(out) :: info integer, optional, intent(in) :: ilev ! Local variables integer :: ilev_, nlev_ character(len=*), parameter :: name='mld_precseti' info = psb_success_ if (.not.allocated(p%precv)) then info = 3111 write(psb_err_unit,*) name,& & ': Error: uninitialized preconditioner,',& &' should call MLD_PRECINIT' return endif nlev_ = size(p%precv) if (present(ilev)) then ilev_ = ilev else ilev_ = 1 end if if ((ilev_<1).or.(ilev_ > nlev_)) then info = -1 write(psb_err_unit,*) name,& &': Error: invalid ILEV/NLEV combination',ilev_, nlev_ return endif if (what == mld_coarse_aggr_size_) then p%coarse_aggr_size = max(val,-1) return end if ! ! Set preconditioner parameters at level ilev. ! if (present(ilev)) then if (ilev_ == 1) then ! ! Rules for fine level are slightly different. ! select case(what) case(mld_smoother_type_) call onelev_set_smoother(p%precv(ilev_),val,info) case(mld_sub_solve_) call onelev_set_solver(p%precv(ilev_),val,info) case(mld_smoother_sweeps_,mld_ml_type_,mld_aggr_alg_,mld_aggr_kind_,& & mld_smoother_pos_,mld_aggr_omega_alg_,mld_aggr_eig_,& & mld_smoother_sweeps_pre_,mld_smoother_sweeps_post_,& & mld_sub_restr_,mld_sub_prol_, & & mld_sub_ren_,mld_sub_ovr_,mld_sub_fillin_) call p%precv(ilev_)%set(what,val,info) case default call p%precv(ilev_)%set(what,val,info) end select else if (ilev_ > 1) then select case(what) case(mld_smoother_type_) call onelev_set_smoother(p%precv(ilev_),val,info) case(mld_sub_solve_) call onelev_set_solver(p%precv(ilev_),val,info) case(mld_smoother_sweeps_,mld_ml_type_,mld_aggr_alg_,mld_aggr_kind_,& & mld_smoother_pos_,mld_aggr_omega_alg_,mld_aggr_eig_,& & mld_smoother_sweeps_pre_,mld_smoother_sweeps_post_,& & mld_sub_restr_,mld_sub_prol_, & & mld_sub_ren_,mld_sub_ovr_,mld_sub_fillin_,& & mld_coarse_mat_) call p%precv(ilev_)%set(what,val,info) case(mld_coarse_subsolve_) if (ilev_ /= nlev_) then write(psb_err_unit,*) name,& & ': Error: Inconsistent specification of WHAT vs. ILEV' info = -2 return end if call onelev_set_solver(p%precv(ilev_),val,info) case(mld_coarse_solve_) if (ilev_ /= nlev_) then write(psb_err_unit,*) name,& & ': Error: Inconsistent specification of WHAT vs. ILEV' info = -2 return end if if (nlev_ > 1) then call p%precv(nlev_)%set(mld_coarse_solve_,val,info) select case (val) case(mld_bjac_) call onelev_set_smoother(p%precv(nlev_),val,info) #if defined(HAVE_UMF_) call onelev_set_solver(p%precv(nlev_),mld_umf_,info) #elif defined(HAVE_SLU_) call onelev_set_solver(p%precv(nlev_),mld_slu_,info) #else call onelev_set_solver(p%precv(nlev_),mld_ilu_n_,info) #endif call p%precv(nlev_)%set(mld_coarse_mat_,mld_distr_mat_,info) case(mld_umf_, mld_slu_,mld_ilu_n_, mld_ilu_t_,mld_milu_n_) call onelev_set_smoother(p%precv(nlev_),mld_bjac_,info) call onelev_set_solver(p%precv(nlev_),val,info) call p%precv(nlev_)%set(mld_coarse_mat_,mld_repl_mat_,info) case(mld_sludist_) call onelev_set_smoother(p%precv(nlev_),mld_bjac_,info) call onelev_set_solver(p%precv(nlev_),val,info) call p%precv(nlev_)%set(mld_coarse_mat_,mld_distr_mat_,info) case(mld_jac_) call onelev_set_smoother(p%precv(nlev_),mld_bjac_,info) call onelev_set_solver(p%precv(nlev_),mld_diag_scale_,info) call p%precv(nlev_)%set(mld_coarse_mat_,mld_distr_mat_,info) end select endif case(mld_coarse_sweeps_) if (ilev_ /= nlev_) then write(psb_err_unit,*) name,& & ': Error: Inconsistent specification of WHAT vs. ILEV' info = -2 return end if call p%precv(nlev_)%set(mld_smoother_sweeps_,val,info) case(mld_coarse_fillin_) if (ilev_ /= nlev_) then write(psb_err_unit,*) name,& & ': Error: Inconsistent specification of WHAT vs. ILEV' info = -2 return end if call p%precv(nlev_)%set(mld_sub_fillin_,val,info) case default call p%precv(ilev_)%set(what,val,info) end select endif else if (.not.present(ilev)) then ! ! ilev not specified: set preconditioner parameters at all the appropriate ! levels ! select case(what) case(mld_sub_solve_) do ilev_=1,max(1,nlev_-1) if (.not.allocated(p%precv(ilev_)%sm)) then write(psb_err_unit,*) name,& & ': Error: uninitialized preconditioner component,',& & ' should call MLD_PRECINIT' info = -1 return endif call onelev_set_solver(p%precv(ilev_),val,info) end do case(mld_sub_restr_,mld_sub_prol_,& & mld_sub_ren_,mld_sub_ovr_,mld_sub_fillin_) do ilev_=1,max(1,nlev_-1) call p%precv(ilev_)%set(what,val,info) end do case(mld_smoother_sweeps_) do ilev_=1,max(1,nlev_-1) call p%precv(ilev_)%set(what,val,info) end do case(mld_smoother_type_) do ilev_=1,max(1,nlev_-1) call onelev_set_smoother(p%precv(ilev_),val,info) end do case(mld_ml_type_,mld_aggr_alg_,mld_aggr_kind_,& & mld_smoother_sweeps_pre_,mld_smoother_sweeps_post_,& & mld_smoother_pos_,mld_aggr_omega_alg_,& & mld_aggr_eig_,mld_aggr_filter_) do ilev_=1,nlev_ call p%precv(ilev_)%set(what,val,info) end do case(mld_coarse_mat_) if (nlev_ > 1) then call p%precv(nlev_)%set(mld_coarse_mat_,val,info) end if case(mld_coarse_solve_) if (nlev_ > 1) then call p%precv(nlev_)%set(mld_coarse_solve_,val,info) select case (val) case(mld_bjac_) call onelev_set_smoother(p%precv(nlev_),mld_bjac_,info) #if defined(HAVE_UMF_) call onelev_set_solver(p%precv(nlev_),mld_umf_,info) #elif defined(HAVE_SLU_) call onelev_set_solver(p%precv(nlev_),mld_slu_,info) #else call onelev_set_solver(p%precv(nlev_),mld_ilu_n_,info) #endif call p%precv(nlev_)%set(mld_coarse_mat_,mld_distr_mat_,info) case(mld_umf_, mld_slu_,mld_ilu_n_, mld_ilu_t_,mld_milu_n_) call onelev_set_smoother(p%precv(nlev_),mld_bjac_,info) call onelev_set_solver(p%precv(nlev_),val,info) call p%precv(nlev_)%set(mld_coarse_mat_,mld_repl_mat_,info) case(mld_sludist_) call onelev_set_smoother(p%precv(nlev_),mld_bjac_,info) call onelev_set_solver(p%precv(nlev_),val,info) call p%precv(nlev_)%set(mld_coarse_mat_,mld_distr_mat_,info) case(mld_jac_) call onelev_set_smoother(p%precv(nlev_),mld_bjac_,info) call onelev_set_solver(p%precv(nlev_),mld_diag_scale_,info) call p%precv(nlev_)%set(mld_coarse_mat_,mld_distr_mat_,info) end select endif case(mld_coarse_subsolve_) if (nlev_ > 1) then call onelev_set_solver(p%precv(nlev_),val,info) endif case(mld_coarse_sweeps_) if (nlev_ > 1) then call p%precv(nlev_)%set(mld_smoother_sweeps_,val,info) end if case(mld_coarse_fillin_) if (nlev_ > 1) then call p%precv(nlev_)%set(mld_sub_fillin_,val,info) end if case default do ilev_=1,nlev_ call p%precv(ilev_)%set(what,val,info) end do end select endif contains subroutine onelev_set_smoother(level,val,info) type(mld_d_onelev_type), intent(inout) :: level integer, intent(in) :: val integer, intent(out) :: info info = psb_success_ ! ! This here requires a bit more attention. ! select case (val) case (mld_noprec_) if (allocated(level%sm)) then select type (sm => level%sm) type is (mld_d_base_smoother_type) ! do nothing class default call level%sm%free(info) if (info == 0) deallocate(level%sm) if (info == 0) allocate(mld_d_base_smoother_type ::& & level%sm, stat=info) if (info == 0) allocate(mld_d_id_solver_type ::& & level%sm%sv, stat=info) end select else allocate(mld_d_base_smoother_type ::& & level%sm, stat=info) if (info ==0) allocate(mld_d_id_solver_type ::& & level%sm%sv, stat=info) endif case (mld_jac_) if (allocated(level%sm)) then select type (sm => level%sm) class is (mld_d_jac_smoother_type) ! do nothing class default call level%sm%free(info) if (info == 0) deallocate(level%sm) if (info == 0) allocate(mld_d_jac_smoother_type :: & & level%sm, stat=info) if (info == 0) allocate(mld_d_diag_solver_type :: & & level%sm%sv, stat=info) end select else allocate(mld_d_jac_smoother_type :: level%sm, stat=info) if (info == 0) allocate(mld_d_diag_solver_type ::& & level%sm%sv, stat=info) endif case (mld_bjac_) if (allocated(level%sm)) then select type (sm => level%sm) class is (mld_d_jac_smoother_type) ! do nothing class default call level%sm%free(info) if (info == 0) deallocate(level%sm) if (info == 0) allocate(mld_d_jac_smoother_type ::& & level%sm, stat=info) if (info == 0) allocate(mld_d_ilu_solver_type ::& & level%sm%sv, stat=info) end select else allocate(mld_d_jac_smoother_type :: level%sm, stat=info) if (info == 0) allocate(mld_d_ilu_solver_type ::& & level%sm%sv, stat=info) endif case (mld_as_) if (allocated(level%sm)) then select type (sm => level%sm) class is (mld_d_as_smoother_type) ! do nothing class default call level%sm%free(info) if (info == 0) deallocate(level%sm) if (info == 0) allocate(mld_d_as_smoother_type ::& & level%sm, stat=info) if (info == 0) allocate(mld_d_ilu_solver_type ::& & level%sm%sv, stat=info) end select else allocate(mld_d_as_smoother_type :: level%sm, stat=info) if (info == 0) allocate(mld_d_ilu_solver_type ::& & level%sm%sv, stat=info) endif case default ! ! Do nothing and hope for the best :) ! end select if (allocated(level%sm)) & & call level%sm%default() end subroutine onelev_set_smoother subroutine onelev_set_solver(level,val,info) type(mld_d_onelev_type), intent(inout) :: level integer, intent(in) :: val integer, intent(out) :: info info = psb_success_ ! ! This here requires a bit more attention. ! select case (val) case (mld_f_none_) if (allocated(level%sm%sv)) then select type (sv => level%sm%sv) class is (mld_d_id_solver_type) ! do nothing class default call level%sm%sv%free(info) if (info == 0) deallocate(level%sm%sv) if (info == 0) allocate(mld_d_id_solver_type ::& & level%sm%sv, stat=info) end select else allocate(mld_d_id_solver_type :: level%sm%sv, stat=info) endif if (allocated(level%sm)) then if (allocated(level%sm%sv)) & & call level%sm%sv%default() end if case (mld_diag_scale_) if (allocated(level%sm%sv)) then select type (sv => level%sm%sv) class is (mld_d_diag_solver_type) ! do nothing class default call level%sm%sv%free(info) if (info == 0) deallocate(level%sm%sv) if (info == 0) allocate(mld_d_diag_solver_type ::& & level%sm%sv, stat=info) end select else allocate(mld_d_diag_solver_type :: level%sm%sv, stat=info) endif if (allocated(level%sm)) then if (allocated(level%sm%sv)) & & call level%sm%sv%default() end if case (mld_ilu_n_,mld_milu_n_,mld_ilu_t_) if (allocated(level%sm%sv)) then select type (sv => level%sm%sv) class is (mld_d_ilu_solver_type) ! do nothing class default call level%sm%sv%free(info) if (info == 0) deallocate(level%sm%sv) if (info == 0) allocate(mld_d_ilu_solver_type ::& & level%sm%sv, stat=info) end select else allocate(mld_d_ilu_solver_type :: level%sm%sv, stat=info) endif if (allocated(level%sm)) then if (allocated(level%sm%sv)) & & call level%sm%sv%default() end if call level%sm%sv%set(mld_sub_solve_,val,info) #ifdef HAVE_UMF_ case (mld_umf_) if (allocated(level%sm%sv)) then select type (sv => level%sm%sv) class is (mld_d_umf_solver_type) ! do nothing class default call level%sm%sv%free(info) if (info == 0) deallocate(level%sm%sv) if (info == 0) allocate(mld_d_umf_solver_type ::& & level%sm%sv, stat=info) end select else allocate(mld_d_umf_solver_type :: level%sm%sv, stat=info) endif if (allocated(level%sm)) then if (allocated(level%sm%sv)) & & call level%sm%sv%default() end if #endif #ifdef HAVE_SLU_ case (mld_slu_) if (allocated(level%sm%sv)) then select type (sv => level%sm%sv) class is (mld_d_slu_solver_type) ! do nothing class default call level%sm%sv%free(info) if (info == 0) deallocate(level%sm%sv) if (info == 0) allocate(mld_d_slu_solver_type ::& & level%sm%sv, stat=info) end select else allocate(mld_d_slu_solver_type :: level%sm%sv, stat=info) endif if (allocated(level%sm)) then if (allocated(level%sm%sv)) & & call level%sm%sv%default() end if #endif case default ! ! Do nothing and hope for the best :) ! end select end subroutine onelev_set_solver end subroutine mld_dprecseti subroutine mld_dprecsetsm(p,val,info,ilev) use psb_base_mod use mld_d_prec_mod, mld_protect_name => mld_dprecsetsm implicit none ! Arguments type(mld_dprec_type), intent(inout) :: p class(mld_d_base_smoother_type), intent(in) :: val integer, intent(out) :: info integer, optional, intent(in) :: ilev ! Local variables integer :: ilev_, nlev_, ilmin, ilmax character(len=*), parameter :: name='mld_precseti' info = psb_success_ if (.not.allocated(p%precv)) then info = 3111 write(psb_err_unit,*) name,& & ': Error: uninitialized preconditioner,',& &' should call MLD_PRECINIT' return endif nlev_ = size(p%precv) if (present(ilev)) then ilev_ = ilev ilmin = ilev ilmax = ilev else ilev_ = 1 ilmin = 1 ilmax = nlev_ end if if ((ilev_<1).or.(ilev_ > nlev_)) then info = -1 write(psb_err_unit,*) name,& & ': Error: invalid ILEV/NLEV combination',ilev_, nlev_ return endif do ilev_ = ilmin, ilmax if (allocated(p%precv(ilev_)%sm)) then if (allocated(p%precv(ilev_)%sm%sv)) then deallocate(p%precv(ilev_)%sm%sv) endif deallocate(p%precv(ilev_)%sm) end if #ifdef HAVE_MOLD allocate(p%precv(ilev_)%sm,mold=val) #else allocate(p%precv(ilev_)%sm,source=val) #endif call p%precv(ilev_)%sm%default() end do end subroutine mld_dprecsetsm subroutine mld_dprecsetsv(p,val,info,ilev) use psb_base_mod use mld_d_prec_mod, mld_protect_name => mld_dprecsetsv implicit none ! Arguments type(mld_dprec_type), intent(inout) :: p class(mld_d_base_solver_type), intent(in) :: val integer, intent(out) :: info integer, optional, intent(in) :: ilev ! Local variables integer :: ilev_, nlev_, ilmin, ilmax character(len=*), parameter :: name='mld_precseti' info = psb_success_ if (.not.allocated(p%precv)) then info = 3111 write(psb_err_unit,*) name,& & ': Error: uninitialized preconditioner,',& &' should call MLD_PRECINIT' return endif nlev_ = size(p%precv) if (present(ilev)) then ilev_ = ilev ilmin = ilev ilmax = ilev else ilev_ = 1 ilmin = 1 ilmax = nlev_ end if if ((ilev_<1).or.(ilev_ > nlev_)) then info = -1 write(psb_err_unit,*) name,& & ': Error: invalid ILEV/NLEV combination',ilev_, nlev_ return endif do ilev_ = ilmin, ilmax if (allocated(p%precv(ilev_)%sm)) then if (allocated(p%precv(ilev_)%sm%sv)) & & deallocate(p%precv(ilev_)%sm%sv) #ifdef HAVE_MOLD allocate(p%precv(ilev_)%sm%sv,mold=val) #else allocate(p%precv(ilev_)%sm%sv,source=val) #endif call p%precv(ilev_)%sm%sv%default() else info = 3111 write(psb_err_unit,*) name,& &': Error: uninitialized preconditioner component,',& &' should call MLD_PRECINIT/MLD_PRECSET' return end if end do end subroutine mld_dprecsetsv ! ! Subroutine: mld_dprecsetc ! Version: real ! ! This routine sets the character parameters defining the preconditioner. More ! precisely, the character parameter identified by 'what' is assigned the value ! contained in 'val'. ! For the multilevel preconditioners, the levels are numbered in increasing ! order starting from the finest one, i.e. level 1 is the finest level. ! ! To set integer and real parameters, see mld_dprecseti and mld_dprecsetr, ! respectively. ! ! ! Arguments: ! p - type(mld_dprec_type), input/output. ! The preconditioner data structure. ! what - integer, input. ! The number identifying the parameter to be set. ! A mnemonic constant has been associated to each of these ! numbers, as reported in the MLD2P4 User's and Reference Guide. ! string - character(len=*), input. ! The value of the parameter to be set. The list of allowed ! values is reported in the MLD2P4 User's and Reference Guide. ! info - integer, output. ! Error code. ! ilev - integer, optional, input. ! For the multilevel preconditioner, the level at which the ! preconditioner parameter has to be set. ! If nlev is not present, the parameter identified by 'what' ! is set at all the appropriate levels. ! ! NOTE: currently, the use of the argument ilev is not "safe" and is reserved to ! MLD2P4 developers. Indeed, by using ilev it is possible to set different values ! of the same parameter at different levels 1,...,nlev-1, even in cases where ! the parameter must have the same value at all the levels but the coarsest one. ! For this reason, the interface mld_precset to this routine has been built in ! such a way that ilev is not visible to the user (see mld_prec_mod.f90). ! subroutine mld_dprecsetc(p,what,string,info,ilev) use psb_base_mod use mld_d_prec_mod, mld_protect_name => mld_dprecsetc implicit none ! Arguments type(mld_dprec_type), intent(inout) :: p integer, intent(in) :: what character(len=*), intent(in) :: string integer, intent(out) :: info integer, optional, intent(in) :: ilev ! Local variables integer :: ilev_, nlev_,val character(len=*), parameter :: name='mld_precsetc' info = psb_success_ if (.not.allocated(p%precv)) then info = 3111 return endif nlev_ = size(p%precv) if (present(ilev)) then ilev_ = ilev else ilev_ = 1 end if if ((ilev_<1).or.(ilev_ > nlev_)) then write(psb_err_unit,*) name,& & ': Error: invalid ILEV/NLEV combination',ilev_, nlev_ info = -1 return endif call mld_stringval(string,val,info) if (info == psb_success_) call mld_inner_precset(p,what,val,info,ilev=ilev) end subroutine mld_dprecsetc ! ! Subroutine: mld_dprecsetr ! Version: real ! ! This routine sets the real parameters defining the preconditioner. More ! precisely, the real parameter identified by 'what' is assigned the value ! contained in 'val'. ! For the multilevel preconditioners, the levels are numbered in increasing ! order starting from the finest one, i.e. level 1 is the finest level. ! ! To set integer and character parameters, see mld_dprecseti and mld_dprecsetc, ! respectively. ! ! Arguments: ! p - type(mld_dprec_type), input/output. ! The preconditioner data structure. ! what - integer, input. ! The number identifying the parameter to be set. ! A mnemonic constant has been associated to each of these ! numbers, as reported in the MLD2P4 User's and Reference Guide. ! val - real(psb_dpk_), input. ! The value of the parameter to be set. The list of allowed ! values is reported in the MLD2P4 User's and Reference Guide. ! info - integer, output. ! Error code. ! ilev - integer, optional, input. ! For the multilevel preconditioner, the level at which the ! preconditioner parameter has to be set. ! If nlev is not present, the parameter identified by 'what' ! is set at all the appropriate levels. ! ! NOTE: currently, the use of the argument ilev is not "safe" and is reserved to ! MLD2P4 developers. Indeed, by using ilev it is possible to set different values ! of the same parameter at different levels 1,...,nlev-1, even in cases where ! the parameter must have the same value at all the levels but the coarsest one. ! For this reason, the interface mld_precset to this routine has been built in ! such a way that ilev is not visible to the user (see mld_prec_mod.f90). ! subroutine mld_dprecsetr(p,what,val,info,ilev) use psb_base_mod use mld_d_prec_mod, mld_protect_name => mld_dprecsetr implicit none ! Arguments type(mld_dprec_type), intent(inout) :: p integer, intent(in) :: what real(psb_dpk_), intent(in) :: val integer, intent(out) :: info integer, optional, intent(in) :: ilev ! Local variables integer :: ilev_,nlev_ character(len=*), parameter :: name='mld_precsetr' info = psb_success_ if (present(ilev)) then ilev_ = ilev else ilev_ = 1 end if if (.not.allocated(p%precv)) then write(psb_err_unit,*) name,& &': Error: uninitialized preconditioner,',& &' should call MLD_PRECINIT' info = 3111 return endif nlev_ = size(p%precv) if ((ilev_<1).or.(ilev_ > nlev_)) then write(psb_err_unit,*) name,& & ': Error: invalid ILEV/NLEV combination',& & ilev_, nlev_ info = -1 return endif ! ! Set preconditioner parameters at level ilev. ! if (present(ilev)) then call p%precv(ilev_)%set(what,val,info) else if (.not.present(ilev)) then ! ! ilev not specified: set preconditioner parameters at all the appropriate levels ! select case(what) case(mld_coarse_iluthrs_) ilev_=nlev_ call p%precv(ilev_)%set(mld_sub_iluthrs_,val,info) case default do ilev_=1,nlev_ call p%precv(ilev_)%set(what,val,info) end do end select endif end subroutine mld_dprecsetr