!!$ !!$ Parallel Sparse BLAS v2.0 !!$ (C) Copyright 2006 Salvatore Filippone University of Rome Tor Vergata !!$ Alfredo Buttari University of Rome Tor Vergata !!$ !!$ Redistribution and use in source and binary forms, with or without !!$ modification, are permitted provided that the following conditions !!$ are met: !!$ 1. Redistributions of source code must retain the above copyright !!$ notice, this list of conditions and the following disclaimer. !!$ 2. Redistributions in binary form must reproduce the above copyright !!$ notice, this list of conditions, and the following disclaimer in the !!$ documentation and/or other materials provided with the distribution. !!$ 3. The name of the PSBLAS group or the names of its contributors may !!$ not be used to endorse or promote products derived from this !!$ software without specific written permission. !!$ !!$ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS !!$ ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED !!$ TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR !!$ PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE PSBLAS GROUP OR ITS CONTRIBUTORS !!$ BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR !!$ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF !!$ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS !!$ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN !!$ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) !!$ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE !!$ POSSIBILITY OF SUCH DAMAGE. !!$ !!$ module psb_error_mod use psb_const_mod public psb_errpush, psb_error, psb_get_errstatus,& & psb_get_errverbosity, psb_set_errverbosity,psb_errcomm, & & psb_erractionsave, psb_erractionrestore, & & psb_get_erraction, psb_set_erraction interface psb_error module procedure psb_serror module procedure psb_perror end interface !!$ integer, parameter :: act_ret=0, act_abort=1, no_err=0 private type psb_errstack_node integer :: err_code=0 ! the error code character(len=20) :: routine='' ! the name of the routine generating the error integer,dimension(5) :: i_err_data=0 ! array of integer data to complete the error msg ! real(kind(1.d0))(dim=10) :: r_err_data=0.d0 ! array of real data to complete the error msg ! complex(dim=10) :: c_err_data=0.c0 ! array of complex data to complete the error msg character(len=20) :: a_err_data='' ! array of character data to complete the error msg type(psb_errstack_node), pointer :: next ! pointer to the next element in the stack end type psb_errstack_node type psb_errstack type(psb_errstack_node), pointer :: top => null() ! pointer to the top element of the stack integer :: n_elems=0 ! number of entries in the stack end type psb_errstack type(psb_errstack),save :: error_stack ! the PSBLAS-2.0 error stack integer,save :: error_status=0 ! the error status (maybe not here) integer,save :: verbosity_level=1 ! the verbosity level (maybe not here) integer,save :: err_action=1 contains ! saves action to support error traceback ! also changes error action to "return" subroutine psb_erractionsave(err_act) integer, intent(out) :: err_act err_act=err_action err_action=act_ret end subroutine psb_erractionsave ! return the action to take upon error occurrence subroutine psb_get_erraction(err_act) integer, intent(out) :: err_act err_act=err_action end subroutine psb_get_erraction ! sets the action to take upon error occurrence subroutine psb_set_erraction(err_act) integer, intent(in) :: err_act err_action=err_act end subroutine psb_set_erraction ! restores error action previously saved with psb_erractionsave subroutine psb_erractionrestore(err_act) integer, intent(in) :: err_act err_action=err_act end subroutine psb_erractionrestore ! checks wether an error has occurred on one of the porecesses in the execution pool subroutine psb_errcomm(ictxt, err) integer, intent(in) :: ictxt integer, intent(inout):: err integer :: temp(2) integer, parameter :: ione=1 ! Cannot use psb_amx or otherwise we have a recursion in module usage call igamx2d(ictxt, 'A', ' ', ione, ione, err, ione,& &temp ,temp,-ione ,-ione,-ione) end subroutine psb_errcomm ! sets verbosity of the error message subroutine psb_set_errverbosity(v) integer, intent(in) :: v verbosity_level=v end subroutine psb_set_errverbosity ! returns verbosity of the error message subroutine psb_get_errverbosity(v) integer, intent(out) :: v v=verbosity_level end subroutine psb_get_errverbosity ! checks the status of the error condition function psb_get_errstatus() integer :: psb_get_errstatus psb_get_errstatus=error_status end function psb_get_errstatus ! pushes an error on the error stack subroutine psb_errpush(err_c, r_name, i_err, a_err) integer, intent(in) :: err_c character(len=*), intent(in) :: r_name character(len=*), optional :: a_err integer, optional :: i_err(5) type(psb_errstack_node), pointer :: new_node allocate(new_node) new_node%err_code = err_c new_node%routine = r_name if(present(i_err)) new_node%i_err_data = i_err if(present(a_err)) new_node%a_err_data = a_err new_node%next => error_stack%top error_stack%top => new_node error_stack%n_elems = error_stack%n_elems+1 if(error_status.eq.0) error_status=1 nullify(new_node) end subroutine psb_errpush ! pops an error from the error stack subroutine psb_errpop(err_c, r_name, i_e_d, a_e_d) integer, intent(out) :: err_c character(len=20), intent(out) :: r_name, a_e_d integer, intent(out) :: i_e_d(5) type(psb_errstack_node), pointer :: old_node err_c = error_stack%top%err_code r_name = error_stack%top%routine i_e_d = error_stack%top%i_err_data a_e_d = error_stack%top%a_err_data old_node => error_stack%top error_stack%top => old_node%next error_stack%n_elems = error_stack%n_elems - 1 if(error_stack%n_elems.eq.0) error_status=0 deallocate(old_node) end subroutine psb_errpop ! handles the occurence of an error in a parallel routine subroutine psb_perror(ictxt) integer, intent(in) :: ictxt integer :: err_c character(len=20) :: r_name, a_e_d integer :: i_e_d(5) integer :: nprow, npcol, me, mypcol integer, parameter :: ione=1, izero=0 call blacs_gridinfo(ictxt, nprow, npcol, me, mypcol) if(error_status.gt.0) then if(verbosity_level.gt.1) then do while (error_stack%n_elems.gt.izero) write(0,'(50("="))') call psb_errpop(err_c, r_name, i_e_d, a_e_d) call psb_errmsg(err_c, r_name, i_e_d, a_e_d,me) ! write(0,'(50("="))') end do call blacs_abort(ictxt,-1) else call psb_errpop(err_c, r_name, i_e_d, a_e_d) call psb_errmsg(err_c, r_name, i_e_d, a_e_d,me) do while (error_stack%n_elems.gt.0) call psb_errpop(err_c, r_name, i_e_d, a_e_d) end do call blacs_abort(ictxt,-1) end if end if if(error_status.gt.izero) then call blacs_abort(ictxt,err_c) end if end subroutine psb_perror ! handles the occurence of an error in a serial routine subroutine psb_serror() integer :: err_c character(len=20) :: r_name, a_e_d integer :: i_e_d(5) integer, parameter :: ione=1, izero=0 if(error_status.gt.0) then if(verbosity_level.gt.1) then do while (error_stack%n_elems.gt.izero) write(0,'(50("="))') call psb_errpop(err_c, r_name, i_e_d, a_e_d) call psb_errmsg(err_c, r_name, i_e_d, a_e_d) ! write(0,'(50("="))') end do else call psb_errpop(err_c, r_name, i_e_d, a_e_d) call psb_errmsg(err_c, r_name, i_e_d, a_e_d) do while (error_stack%n_elems.gt.0) call psb_errpop(err_c, r_name, i_e_d, a_e_d) end do end if end if end subroutine psb_serror ! prints the error msg associated to a specific error code subroutine psb_errmsg(err_c, r_name, i_e_d, a_e_d,me) integer, intent(in) :: err_c character(len=20), intent(in) :: r_name, a_e_d integer, intent(in) :: i_e_d(5) integer, optional :: me if(present(me)) then write(0,'("Process: ",i0,". PSBLAS Error (",i0,") in subroutine: ",a20)')me,err_c,r_name else write(0,'("PSBLAS Error (",i0,") in subroutine: ",a20)')err_c,r_name end if select case (err_c) case(:0) write (0,'("error on calling sperror. err_c must be greater than 0")') case(2) write (0,'("pivot too small: ",i0,1x,a)')i_e_d(1),a_e_d case(3) write (0,'("Invalid number of ovr:",i0)')i_e_d(1) case(5) write (0,'("Invalid input")') case(10) write (0,'("input argument n. ",i0," cannot be less than 0")')i_e_d(1) write (0,'("current value is ",i0)')i_e_d(2) case(20) write (0,'("input argument n. ",i0," cannot be greater than 0")')i_e_d(1) write (0,'("current value is ",i0)')i_e_d(2) case(30) write (0,'("input argument n. ",i0," has an invalid value")')i_e_d(1) write (0,'("current value is ",i0)')i_e_d(2) case(35) write (0,'("Size of input array argument n. ",i0," is invalid.")')i_e_d(1) write (0,'("Current value is ",i0)')i_e_d(2) case(40) write (0,'("input argument n. ",i0," has an invalid value")')i_e_d(1) write (0,'("current value is ",a)')a_e_d(2:2) case(50) write (0,'("input argument n. ",i0," must be equal or greater than input argument n. ",i0)') i_e_d(1), i_e_d(3) write (0,'("current values are ",i0," < ",i0)') i_e_d(2),i_e_d(5) case(60) write (0,'("input argument n. ",i0," must be greater than or equal to ",i0)')i_e_d(1),i_e_d(2) write (0,'("current value is ",i0," < ",i0)')i_e_d(3), i_e_d(2) case(70) write (0,'("input argument n. ",i0," in entry # ",i0," has an invalid value")')i_e_d(1:2) write (0,'("current value is ",a)')a_e_d case(71) write (0,'("Impossible error in ASB: nrow>ncol,")') write (0,'("Actual values are ",i0," > ",i0)')i_e_d(1:2) ! ... csr format error ... case(80) write (0,'("input argument ia2(1) is less than 0")') write (0,'("current value is ",i0)')i_e_d(1) ! ... csr format error ... case(90) write (0,'("indices in ia2 array are not in increasing order")') case(91) write (0,'("indices in ia1 array are not in increasing order")') ! ... csr format error ... case(100) write (0,'("indices in ia1 array are not within problem dimension")') write (0,'("problem dimension is ",i0)')i_e_d(1) case(110) write (0,'("invalid combination of input arguments")') case(115) write (0,'("Invalid process identifier in input array argument n. ",i0,".")')i_e_d(1) write (0,'("Current value is ",i0)')i_e_d(2) case(120) write (0,'("input argument n. ",i0," must be greater than input argument n. ",i0)')i_e_d(1:2) write (0,'("current values are ",i0," < ",i0)') i_e_d(3:4) ! ... coo format error ... case(130) write (0,'("there are duplicated elements in coo format")') write (0,'("please set repflag flag to 2 or 3")') case(134) write (0,'("Invalid input format ",a3)')a_e_d(1:3) case(135) write (0,'("Format ",a3," not yet supported here")')a_e_d(1:3) case(136) write (0,'("Format ",a3," is unknown")')a_e_d(1:3) case(140) write (0,'("indices in input array are not within problem dimension ",2(i0,2x))')i_e_d(1:2) case(150) write (0,'("indices in input array are not belonging to the calling process ",i0)')i_e_d(1) case(290) write (0,'("To call this routine you must first call psb_geall on the same matrix")') case(295) write (0,'("To call this routine you must first call psb_spall on the same matrix")') case(300) write (0,'("Input argument n. ",i0," must be equal to entry n. ",i0," in array input argument n.",i0)') & & i_e_d(1),i_e_d(4),i_e_d(3) write (0,'("Current values are ",i0," != ",i0)')i_e_d(2), i_e_d(5) case(400) write (0,'("MPI error:",i0)')i_e_d(1) case(550) write (0,'("Parameter n. ",i0," must be equal on all BLACS processes. ",i0)')i_e_d(1) case(570) write (0,'("partition function passed as input argument n. ",i0," returns number of processes")')i_e_d(1) write (0,'("greater than No of grid s processes on global point ",i0,". Actual number of grid s ")')i_e_d(4) write (0,'("processes is ",i0,", number returned is ",i0)')i_e_d(2),i_e_d(3) case(575) write (0,'("partition function passed as input argument n. ",i0," returns number of processes")')i_e_d(1) write (0,'("less or equal to 0 on global point ",i0,". Number returned is ",i0)')i_e_d(3),i_e_d(2) case(580) write (0,'("partition function passed as input argument n. ",i0," returns wrong processes identifier")')i_e_d(1) write (0,'("on global point ",i0,". Current value returned is : ",i0)')i_e_d(3),i_e_d(2) case(581) write (0,'("Exactly one of the optional arguments ",a," must be present")')a_e_d case(582) write (0,'("Argument M is required when argument PARTS is specified")') case(600) write (0,'("Sparse Matrix and descriptors are in an invalid state for this subroutine call: ",i0)')i_e_d(1) case (1122) write (0,'("Invalid state for communication descriptor")') case (1123) write (0,'("Invalid combined state for A and DESC_A")') case(1124:1999) write (0,'("computational error. code: ",i0)')err_c case(2010) write (0,'("BLACS error. Number of processes=-1")') case(2011) write (0,'("Initialization error: not enough processes available in the parallel environment")') case(2025) write (0,'("Cannot allocate ",i0," bytes")')i_e_d(1) case(2030) write (0,'("BLACS ERROR: Number of grid columns must be equal to 1\nCurrent value is ",i4," != 1.")')i_e_d(1) case(2231) write (0,'("Invalid input state for matrix.")') case(2232) write (0,'("Input state for matrix is not adequate for regeneration.")') case (2233:2999) write(0,'("resource error. code: ",i0)')err_c case(3000:3009) write (0,'("sparse matrix representation ",a3," not yet implemented")')a_e_d(1:3) case(3010) write (0,'("Case lld not equal matrix_data[N_COL_] is not yet implemented.")') case(3015) write (0,'("transpose option for sparse matrix representation ",a3," not implemented")')a_e_d(1:3) case(3020) write (0,'("Case trans = C is not yet implemented.")') case(3021) write (0,'("Case trans /= N is not yet implemented.")') case(3022) write (0,'("Only unit diagonal so far for triangular matrices. ")') case(3023) write (0,'("Cases DESCRA(1:1)=S DESCRA(1:1)=T not yet implemented. ")') case(3024) write (0,'("Cases DESCRA(1:1)=G not yet implemented. ")') case(3030) write (0,'("Case ja/=ix or ia/=iy is not yet implemented.")') case(3040) write (0,'("Case ix /= 1 or iy /= 1 is not yet implemented.")') case(3050) write (0,'("Case ix /= iy is not yet implemented.")') case(3060) write (0,'("Case ix /= 1 is not yet implemented.")') case(3070) write (0,'("This operation is only implemented with no overlap.")') case(3080) write (0,'("Decompostion type ",i0," not yet supported.")')i_e_d(1) case(3090) write (0,'("Insert matrix mode not yet implemented.")') case(3100) write (0,'("Error on index. Element has not been inserted")') write (0,'("local index is: ",i0," and global index is:",i0)')i_e_d(1:2) case(3110) write (0,'("Before you call this routine, you must assembly sparse matrix")') case(3111:3999) write(0,'("miscellaneus error. code: ",i0)')err_c case(4000) write(0,'("Allocation/deallocation error")') case(4010) write (0,'("Error from call to subroutine ",a)')a_e_d case(4011) write (0,'("Error from call to a subroutine ")') case(4012) write (0,'("Error ",i0," from call to a subroutine ")')i_e_d(1) case(4013) write (0,'("Error from call to subroutine ",a," ",i0)')a_e_d,i_e_d(1) case(4110) write (0,'("Error ",i0," from call to an external package in subroutine ",a)')i_e_d(1),a_e_d case (5001) write (0,'("Invalid ISTOP: ",i0)')i_e_d(1) case (5002) write (0,'("Invalid PREC: ",i0)')i_e_d(1) case (5003) write (0,'("Invalid PREC: ",a3)')a_e_d(1:3) case default write(0,'("unknown error (",i0,") in subroutine ",a)')err_c,r_name write(0,'(5(i0,2x))') i_e_d write(0,'(a)') a_e_d end select end subroutine psb_errmsg end module psb_error_mod