You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
psblas3/docs/pdf/intro.tex

409 lines
19 KiB
TeX

\section{Introduction}
The PSBLAS library, developed with the aim to facilitate the
parallelization of computationally intensive scientific applications,
is designed to address parallel implementation of iterative solvers
for sparse linear systems through the distributed memory paradigm. It
includes routines for multiplying sparse matrices by dense matrices,
solving block diagonal systems with triangular diagonal entries,
preprocessing sparse matrices, and contains additional routines for
dense matrix operations. The current implementation of PSBLAS
addresses a distributed memory execution model operating with message
passing.
The PSBLAS library is internally implemented in a mixture of
Fortran~77 and Fortran~95~\cite{metcalf} programming languages.
A similar approach has been advocated by a number of authors,
e.g.~\cite{machiels}. Moreover, the Fortran~95 facilities for dynamic
memory management and interface overloading greatly enhance the
usability of the PSBLAS
subroutines. In this way, the library can take care of runtime memory
requirements that are quite difficult or even impossible to predict at
implementation or compilation time.
In the current release we rely on the availability of the so-called
allocatable extensions, specified in TR~15581. Strictly speaking they
are outside the Fortran~95 standard; however they have been included
in the Fortran~2003 language standard, and are available in
prctically all Fortran~95 compilers on the market, including the GCC
compiler from the Free Software Foundation (as of version 4.2).
The presentation of the
PSBLAS library follows the general structure of the proposal for
serial Sparse BLAS~\cite{sblas97,sblas02}, which in its turn is based on the
proposal for BLAS on dense matrices~\cite{BLAS1,BLAS2,BLAS3}.
The applicability of sparse iterative solvers to many different areas
causes some terminology problems because the same concept may be
denoted through different names depending on the application area. The
PSBLAS features presented in this document will be discussed referring
to a finite difference discretization of a Partial Differential
Equation (PDE). However, the scope of the library is wider than
that: for example, it can be applied to finite element discretizations
of PDEs, and even to different classes of problems such as nonlinear
optimization, for example in optimal control problems.
The design of a solver for sparse linear systems is driven by many
conflicting objectives, such as limiting occupation of storage
resources, exploiting regularities in the input data, exploiting
hardware characteristics of the parallel platform. To achieve an
optimal communication to computation ratio on distributed memory
machines it is essential to keep the {\em data locality} as high as
possible; this can be done through an appropriate data allocation
strategy. The choice of the preconditioner is another very important
factor that affects efficiency of the implemented application. Optimal
data distribution requirements for a given preconditioner may conflict
with distribution requirements of the rest of the solver. Finding the
optimal trade-off may be very difficult because it is application
dependent. Possible solution to these problems and other important
inputs to the development of the PSBLAS software package has come from
an established experience in applying the PSBLAS solvers to
computational fluid dynamics applications.
\section{General overview}
\label{sec:overview}
The PSBLAS library is designed to handle the implementation of
iterative solvers for sparse linear systems on distributed memory
parallel computers. The system coefficient matrix $A$ must be square;
it may be real or complex, nonsymmetric, and its sparsity pattern
needs not to be symmetric. The serial computation parts are based on
the serial sparse BLAS, so that any extension made to the data
structures of the serial kernels is available to the parallel
version. The overall design and parallelization strategy have been
influenced by the structure of the ScaLAPACK parallel
library. The layered structure of the PSBLAS library
is shown in figure~\ref{fig:psblas} ; lower layers of the library
indicate an encapsulation relationship with upper layers. The ongoing
discussion focuses on the Fortran~95 layer immediately below the
application layer.
The serial parts of the computation on each process are executed through
calls to the serial sparse BLAS subroutines. In a similar way, the
inter-process message exchanges are implemented through the Basic
Linear Algebra Communication Subroutines (BLACS) library~\cite{BLACS}
that guarantees a portable and efficient communication layer. The
Message Passing Interface code is encapsulated within the BLACS
layer. However, in some cases, MPI routines are directly used either
to improve efficiency or to implement communication patterns for which
the BLACS package doesn't provide any method.
In any case we provide wrappers around the BLACS routines so that the
user does not need to delve into their details (see Sec.~\ref{sec:parenv}).
%% We assume that the user program has initialized a BLACS process grid
%% with one column and as many rows as there are processes; the PSBLAS
%% initialization routines will take the communication context for this
%% grid and store internally for further use.
\begin{figure}[h] \begin{center}
\includegraphics[scale=0.45]{figures/psblas}
\end{center}
\caption{PSBLAS library components hierarchy.\label{fig:psblas}}
\end{figure}
The type of linear system matrices that we address typically arise in the
numerical solution of PDEs; in such a context,
it is necessary to pay special attention to the
structure of the problem from which the application originates.
The nonzero pattern of a matrix arising from the
discretization of a PDE is influenced by various factors, such as the
shape of the domain, the discretization strategy, and
the equation/unknown ordering. The matrix itself can be interpreted as
the adjacency matrix of the graph associated with the discretization
mesh.
The distribution of the coefficient matrix for the linear system is
based on the ``owner computes'' rule:
the variable associated to each mesh point is assigned to a process
that will own the corresponding row in the coefficient matrix and
will carry out all related computations. This allocation strategy
is equivalent to a partition of the discretization mesh into {\em
sub-domains}.
Our library supports any distribution that keeps together
the coefficients of each matrix row; there are no other constraints on
the variable assignment.
This choice is consistent with data distributions commonly used in
ScaLAPACK such as \verb|CYCLIC(N)| and \verb|BLOCK|,
as well as completely arbitrary assignments of
equation indices to processes. In particular it is consistent with the
usage of graph partitioning tools commonly available in the
literature, e.g. METIS~\cite{METIS}.
Dense vectors conform to sparse
matrices, that is, the entries of a vector follow the same distribution
of the matrix rows.
We assume that the sparse matrix is built in parallel, where each
process generates its own portion. We never require that the entire
matrix be available on a single node. However, it is possible
to hold the entire matrix in one process and distribute it
explicitly\footnote{In our prototype implementation we provide
sample scatter/gather routines.}, even though the resulting
bottleneck would make this option unattractive in most cases.
\subsection{Basic Nomenclature}
Our computational model implies that the data allocation on the
parallel distributed memory machine is guided by the structure of the
physical model, and specifically by the discretization mesh of the
PDE.
Each point of the discretization mesh will have (at least) one
associated equation/variable, and therefore one index. We say that
point $i$ {\em depends\/} on point $j$ if the equation for a
variable associated with $i$ contains a term in $j$, or equivalently
if $a_{ij} \ne0$.
After the partition of the discretization mesh into {\em sub-domains\/}
assigned to the parallel processes,
we classify the points of a given sub-domain as following.
\begin{description}
\item[Internal.] An internal point of
a given domain {\em depends} only on points of the
same domain.
If all points of a domain are assigned to one
process, then a computational step (e.g., a
matrix-vector product) of the
equations associated with the internal points requires no data
items from other domains and no communications.
\item[Boundary.] A point of
a given domain is a boundary point if it {\em depends} on points
belonging to other domains.
\item[Halo.] A halo point for a given domain is a point belonging to
another domain such that there is a boundary point which {\em depends\/}
on it. Whenever performing a computational step, such as a
matrix-vector product, the values associated with halo points are
requested from other domains. A boundary point of a given
domain is a halo point for (at least) another domain; therefore
the cardinality of the boundary points set denotes the amount of data
sent to other domains.
\item[Overlap.] An overlap point is a boundary point assigned to
multiple domains. Any operation that involves an overlap point
has to be replicated for each assignment.
\end{description}
Overlap points do not usually exist in the basic data
distribution, but they are a feature of Domain Decomposition
Schwarz preconditioners which we are in the process of including in
our distribution~\cite{PARA04,APNUM06}.
We denote the sets of internal, boundary and halo points for a given
subdomain by $\cal I$, $\cal B$ and $\cal H$.
Each subdomain is assigned to one process; each process usually
owns one subdomain, although the user may choose to assign more than
one subdomain to a process. If each process $i$ owns one
subdomain, the number of rows in the local sparse matrix is
$|{\cal I}_i| + |{\cal B}_i|$, and the number of local columns
(i.e. those for which there exists at least one non-zero entry in the
local rows) is $|{\cal I}_i| + |{\cal B}_i| +|{\cal H}_i|$.
\begin{figure}[h]
\begin{center}
\leavevmode
\rotatebox{-90}{\includegraphics[scale=0.45]{figures/points}}
\end{center}
\caption{Point classfication.\label{fig:points}}
\end{figure}
This classification of mesh points guides the naming scheme that we
adopted in the library internals and in the data structures. We
explicitly note that ``Halo'' points are also often called ``ghost''
points in the literature.
\subsection{Library contents}
The PSBLAS library consists of various classes of subroutines:
\begin{description}
\item[Computational routines] comprising:
\begin{itemize}
\item Sparse matrix by dense matrix product;
\item Sparse triangular
systems solution for block diagonal matrices;
\item Vector and matrix norms;
\item Dense matrix sums;
\item Dot products.
\end{itemize}
\item[Communication routines] handling halo and overlap
communications;
\item[Data management and auxiliary routines] including:
\begin{itemize}
\item Parallel environment management
\item Communication descriptors allocation;
\item Dense and sparse matrix allocation;
\item Dense and sparse matrix build and update;
\item Sparse matrix and data distribution preprocessing.
\end{itemize}
\item[Preconditioner routines]
\item[Iterative methods] a subset of Krylov subspace iterative
methods
\end{description}
The following naming scheme has been adopted for all the symbols
internally defined in the PSBLAS software package:
\begin{itemize}
\item all the symbols (i.e. subroutine names, data types...) are
prefixed by \verb|psb_|
\item all the data type names are suffixed by \verb|_type|
\item all the constant values are suffixed by \verb|_|
\item all the subroutine names follow the rule \verb|psb_xxname| where
\verb|xx| can be either:
\begin{itemize}
\item \verb|ge|: the routine is related to dense data,
\item \verb|sp|: the routine is related to sparse data,
\item \verb|cd|: the routine is related to communication descriptor (see~\ref{sec:datastruct}).
\end{itemize}
For example the \verb|psb_geins|, \verb|psb_spins| and
\verb|psb_cdins| perform the same action (see~\ref{sec:toolsrout}) on
dense matrices, sparse matrices and communication descriptors
respectively.
Interface overloading allows the usage of the same subroutine
interfaces for both real and complex data.
\end{itemize}
In the description of the subroutines, arguments or argument entries
are classified as:
\begin{description}
\item[global] For input arguments, the value must be the same on all processes
participating in the subroutine call; for output arguments the value
is guaranteed to be the same.
\item[local] Each process has its own value(s) independently.
\end{description}
\subsection{Application structure}
The main underlying principle of the PSBLAS library is that the
library objects are created and exist with reference to a discretized
space to which there corresponds an index space and a matrix sparsity
pattern. As an example, consider a cell-centered finite-volume
discretization of the Navier-Stokes equations on a simulation domain;
the index space $1\dots n$ is isomorphic to the set of cell centers,
whereas the pattern of the associated linear system matrix is
isomorphic to the adjacency graph imposed on the discretization mesh
by the discretization stencil.
Thus the first order of business is to establish an index space, and
this is done with a call to \verb|psb_cdall| in which we specify the
size of the index space $n$ and the allocation of the elements of the
index space to the various processes making up the MPI (virtual)
parallel machine.
The index space is partitioned among processes, and this creates a
mapping from the ``global'' numbering $1\dots n$ to a numbering
``local'' to each process; each process $i$ will own a certain subset
$1\dots n_{\hbox{row}_i}$, each element of which corresponds to a certain
element of $1\dots n$. The user does not set explicitly this mapping;
when the application needs to indicate to which element of the index
space a certain item is related, such as the row and column index of a
matrix coefficient, it does so in the ``global'' numbering, and the
library will translate into the appropriate ``local'' numbering.
For a given index space $1\dots n$ there are many possible associated
topologies, i.e. many different discretization stencils; thus the
description of the index space is not completed until the user has
defined a sparsity pattern, either explicitly through \verb|psb_cdins|
or implicitly through \verb|psb_spins|. The descriptor is finalized
with a call to \verb|psb_cdasb| and a sparse matrix with a call to
\verb|psb_spasb|. After \verb|psb_cdasb| each process $i$ will have
defined a set of ``halo'' (or ``ghost'') indices
$n_{\hbox{row}_i}+1\dots n_{\hbox{col}_i}$, denoting elements of the index
space that are \emph{not} assigned to process $i$; however the
variables associated with them are needed to complete computations
associated with the sparse matrix $A$, and thus they have to be
fetched from (neighbouring) processes. The descriptor of the index
space is built exactly for the purpose of properly sequencing the
communication steps required to achieve this objective.
A simple application structure will walk through the index space
allocation, matrix/vector creation and linear system solution as
follows:
\begin{enumerate}
\item Initialize parallel environment with \verb|psb_init|
\item Initialize index space with \verb|psb_cdall|
\item Allocate sparse matrix and dense vectors with \verb|psb_spall|
and \verb|psb_geall|
\item Loop over all local rows, generate matrix and vector entries,
and insert them with \verb|psb_spins| and \verb|psb_geins|
\item Assemble the various entities:
\begin{enumerate}
\item \verb|psb_cdasb|
\item \verb|psb_spasb|
\item \verb|psb_geasb|
\end{enumerate}
\item Choose the preconditioner to be used with \verb|psb_precset| and
build it with \verb|psb_precbld|
\item Call the iterative method of choice, e.g. \verb|psb_bicgstab|
\end{enumerate}
This is the structure of the sample program
\verb|test/pargen/ppde90.f90|.
For a simulation in which the same discretization mesh is used over
multiple time steps, the following structure may be more appropriate:
\begin{enumerate}
\item Initialize parallel environment with \verb|psb_init|
\item Initialize index space with \verb|psb_cdall|
\item Loop over the topology of the discretization mesh and build the
descriptor with \verb|psb_cdins|
\item Assemble the descriptor with \verb|psb_cdasb|
\item Allocate the sparse matrices and dense vectors with
\verb|psb_spall| and \verb|psb_geall|
\item Loop over the time steps:
\begin{enumerate}
\item If after first time step,
reinitialize the sparse matrix with \verb|psb_sprn|; also zero out
the dense vectors;
\item Loop over the mesh, generate the coefficients and insert/update
them with \verb|psb_spins| and \verb|psb_geins|
\item Assemble with \verb|psb_spasb| and \verb|psb_geasb|
\item Choose and build preconditioner with \verb|psb_precset| and
\verb|psb_precbld|
\item Call the iterative method of choice, e.g. \verb|psb_bicgstab|
\end{enumerate}
\end{enumerate}
The insertion routines will be called as many times as needed;
they only need to be called on the data that is actually
allocated to the current process, i.e. each process generates its own
data.
In principle there is no specific order in the calls to
\verb|psb_spins|, nor is there a requirement to build a matrix row in
its entirety before calling the routine; this allows the application
programmer to walk through the discretization mesh element by element,
generating the main part of a given matrix row but also contributions
to the rows corresponding to neighbouring elements.
From a functional point of view it is even possible to execute one
call for each nonzero coefficient; however this would have a
substantial computational overhead. It is therefore advisable to pack
a certain amount of data into each call to the insertion routine, say
touching on a few tens of rows; the best performng value would depend
on both the architecture of the computer being used and on the problem
structure.
At the opposite extreme, it would be possible to generate the entire
part of a coefficient matrix residing on a process and pass it in a
single call to \verb|psb_spins|; this, however, would entail a
doubling of memory occupation, and thus would be almost always far
from optimal.
\subsection{Programming model}
The PSBLAS librarary is based on the Single Program Multiple Data
(SPMD) programming model: each process participating in the
computation performs the same actions on a chunk of data. Parallelism
is thus data-driven.
Because of this structure, practically all subroutines \emph{must} be
called simultaneously by all processes participating in the
computation, i.e each subroutine call acts implicitly as a
synchronization point. The exceptions to this rule are:
\begin{itemize}
\item The insertion routines \verb|psb_cdins|, \verb|psb_spins| and
\verb|psb_geins|;
\item The error handling routines.
\end{itemize}
In particular, as per the discussion in the previous section, the
insertion routines may be called a different number of times on each
process, depending on the data distribution chosen by the user.
%%% Local Variables:
%%% mode: latex
%%% TeX-master: "userguide"
%%% End: