psblas3/util/psb_gps_mod.f90

!   
!                Parallel Sparse BLAS  version 3.5
!      (C) Copyright 2006-2018
!        Salvatore Filippone    
!        Alfredo Buttari      
!   
!    Redistribution and use in source and binary forms, with or without
!    modification, are permitted provided that the following conditions
!    are met:
!      1. Redistributions of source code must retain the above copyright
!         notice, this list of conditions and the following disclaimer.
!      2. Redistributions in binary form must reproduce the above copyright
!         notice, this list of conditions, and the following disclaimer in the
!         documentation and/or other materials provided with the distribution.
!      3. The name of the PSBLAS group or the names of its contributors may
!         not be used to endorse or promote products derived from this
!         software without specific written permission.
!   
!    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
!    ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
!    TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
!    PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE PSBLAS GROUP OR ITS CONTRIBUTORS
!    BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
!    CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
!    SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
!    INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
!    CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
!    ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
!    POSSIBILITY OF SUCH DAMAGE.
!   
!    
! Author: Gibbs-Poole-Stockmeyer (revised by Stefano Toninel)
!
! Routines for Gibbs-Poole-Stockmeyer matrix bandwidth and profile reduction.
! Originally released in ACM-TOMS no. 508 written in Fortran77.
! Now revised and ported to Fortran90.
! Further revised and ported into the PSBLAS environment. 
!
module psb_gps_mod
  !
  use psb_base_mod, only : psb_ipk_
  public psb_gps_reduce
  !
  ! COMMON /GRA/ N, IDPTH, IDEG
  !
  private
  ! common /CC/ XCC,SIZEG,STPT
  integer(psb_ipk_), save            :: xcc,n,idpth,ideg
  integer(psb_ipk_),allocatable,SAVE :: SIZEG(:),STPT(:)
  !
  ! COMMON /LVLW/ NHIGH,NLOW,NACUM
  integer(psb_ipk_),allocatable,target,save :: NHIGH(:),NLOW(:),NACUM(:),AUX(:)
  integer(psb_ipk_),PARAMETER :: INIT=500
  !
CONTAINS
  !
!!$  SUBROUTINE psb_gps_reduce(NDSTK, NR, IOLD, RENUM, NDEG, LVL, LVLS1, LVLS2,&
!!$       & CCSTOR, IBW2, IPF2,NE,IDPTHE,IDEGE)
  SUBROUTINE psb_gps_reduce(NDSTK, NR, IDEGE, IOLD, RENUM, NDEG,ibw2,ipf2,IDPTHE)
    !  SUBROUTINE REDUCE DETERMINES A ROW AND COLUMN PERMUTATION WHICH,
    !  WHEN APPLIED TO A GIVEN SPARSE MATRIX, PRODUCES A PERMUTED
    !  MATRIX WITH A SMALLER BANDWIDTH AND PROFILE.
    !  THE INPUT ARRAY IS A CONNECTION TABLE WHICH REPRESENTS THE
    !  INDICES OF THE NONZERO ELEMENTS OF THE MATRIX, A.  THE ALGO-
    !  RITHM IS DESCRIBED IN TERMS OF THE ADJACENCY GRAPH WHICH
    !  HAS THE CHARACTERISTIC THAT THERE IS AN EDGE (CONNECTION)
    !  BETWEEN NODES I AND J IF A(I,J) /= 0 AND I /= J.
    !  DIMENSIONING INFORMATION--THE FOLLOWING INTEGER ARRAYS MUST BE
    !  DIMENSIONED IN THE CALLING ROUTINE.
    !    NDSTK(NR,D1)        D1 IS >= MAXIMUM DEGREE OF ALL NODES.
    !    IOLD(D2)            D2 AND NR ARE >= THE TOTAL NUMBER OF
    !    RENUM(D2+1)         NODES IN THE GRAPH.
    !    NDEG(D2)            STORAGE REQUIREMENTS CAN BE SIGNIFICANTLY
    !    LVL(D2)             DECREASED FOR IBM 360 AND 370 COMPUTERS
    !    LVLS1(D2)           BY REPLACING INTEGER NDSTK BY
    !    LVLS2(D2)           INTEGER*2 NDSTK IN SUBROUTINES REDUCE,
    !    CCSTOR(D2)          DGREE, FNDIAM, TREE AND NUMBER.
    !  COMMON INFORMATION--THE FOLLOWING COMMON BLOCK MUST BE IN THE
    !  CALLING ROUTINE.
    !    COMMON/GRA/N,IDPTH,IDEG
    !  EXPLANATION OF INPUT VARIABLES--
    !    NDSTK-     CONNECTION TABLE REPRESENTING GRAPH.
    !               NDSTK(I,J)=NODE NUMBER OF JTH CONNECTION TO NODE
    !               NUMBER I.  A CONNECTION OF A NODE TO ITSELF IS NOT
    !               LISTED.  EXTRA POSITIONS MUST HAVE ZERO FILL.
    !    NR-        ROW DIMENSION ASSIGNED NDSTK IN CALLING PROGRAM.
    !    IOLD(I)-   NUMBERING OF ITH NODE UPON INPUT.
    !               IF NO NUMBERING EXISTS THEN IOLD(I)=I.
    !    N-         NUMBER OF NODES IN GRAPH (EQUAL TO ORDER OF MATRIX).
    !    IDEG-      MAXIMUM DEGREE OF ANY NODE IN THE GRAPH.
    !  EXPLANATION OF OUTPUT VARIABLES--
    !    RENUM(I)-  THE NEW NUMBER FOR THE ITH NODE.
    !    NDEG(I)-   THE DEGREE OF THE ITH NODE.
    !    IBW2-      THE BANDWIDTH AFTER RENUMBERING.
    !    IPF2-      THE PROFILE AFTER RENUMBERING.
    !    IDPTH-     NUMBER OF LEVELS IN REDUCE LEVEL STRUCTURE.
    !  THE FOLLOWING ONLY HAVE MEANING IF THE GRAPH WAS CONNECTED--
    !    LVL(I)-    INDEX INTO LVLS1 TO THE FIRST NODE IN LEVEL I.
    !               LVL(I+1)-LVL(I)= NUMBER OF NODES IN ITH LEVEL
    !    LVLS1-     NODE NUMBERS LISTED BY LEVEL.
    !    LVLS2(I)-  THE LEVEL ASSIGNED TO NODE I BY REDUCE.
    !  WORKING STORAGE VARIABLE--
    !    CCSTOR
    !  LOCAL STORAGE--
    !    COMMON/CC/-SUBROUTINES REDUCE, SORT2 AND PIKLVL ASSUME THAT
    !               THE GRAPH HAS AT MOST 50 CONNECTED COMPONENTS.
    !               SUBROUTINE FNDIAM ASSUMES THAT THERE ARE AT MOST
    !               100 NODES IN THE LAST LEVEL.
    !    COMMON/LVLW/-SUBROUTINES SETUP AND PIKLVL ASSUME THAT THERE
    !               ARE AT MOST 100 LEVELS.
    ! USE INTEGER*2 NDSTK  WITH AN IBM 360 OR 370.
    use psb_base_mod
    implicit none 
    INTEGER(psb_ipk_) :: NR, IDEGE, IBW2, IPF2, IDPTHE
    ! COMMON /GRA/ N, IDPTH, IDEG
    ! IT IS ASSUMED THAT THE GRAPH HAS AT MOST 50 CONNECTED COMPONENTS.
    ! COMMON /CC/ XCC, SIZEG(50), STPT(50)
    ! COMMON /LVLW/ NHIGH(100), NLOW(100), NACUM(100)
    integer(psb_ipk_) :: stnode, rvnode, stnum, sbnum
    integer(psb_ipk_) :: ndstk(nr,idege), iold(nr), renum(nr+1), ndeg(nr) 
    integer(psb_ipk_) :: lvl(nr), lvls1(nr), lvls2(nr), ccstor(nr)    
    integer(psb_ipk_) :: nflg, info, i, ibw1, ipf1, idflt, isdir, lroot, lowdg
    integer(psb_ipk_) :: lvlbot, lvln, lvlwth, maxlw, num
    n     = nr
    ideg  = idege
    idpth = 0

    ALLOCATE(SIZEG(NR),STPT(NR), STAT=INFO)
    IF(INFO /= psb_success_) THEN
      write(psb_out_unit,*) 'ERROR! MEMORY ALLOCATION # 1 FAILED IN GPS'
      STOP
    END IF
    !
    ALLOCATE(NHIGH(INIT), NLOW(INIT), NACUM(INIT), AUX(INIT), STAT=INFO)
    IF(INFO /= psb_success_) THEN
      write(psb_out_unit,*) 'ERROR! MEMORY ALLOCATION # 2 FAILED IN GPS'
      STOP
    END IF
    !
    IBW2 = 0
    IPF2 = 0
    ! SET RENUM(I)=0 FOR ALL I TO INDICATE NODE I IS UNNUMBERED
    DO  I=1,N
      RENUM(I) = 0
    END DO
    ! COMPUTE DEGREE OF EACH NODE AND ORIGINAL BANDWIDTH AND PROFILE
    CALL DGREE(NDSTK, NR, NDEG, IOLD, IBW1, IPF1)
    ! SBNUM= LOW END OF AVAILABLE NUMBERS FOR RENUMBERING
    ! STNUM= HIGH END OF AVAILABLE NUMBERS FOR RENUMBERING
    SBNUM = 1
    STNUM = N
    ! NUMBER THE NODES OF DEGREE ZERO
    DO I=1,N
      IF (NDEG(I) > 0) CYCLE
      RENUM(I) = STNUM
      STNUM = STNUM - 1
    END DO
    ! FIND AN UNNUMBERED NODE OF MIN DEGREE TO START ON
    do 
      LOWDG = IDEG + 1
      NFLG = 1
      ISDIR = 1
      DO  I=1,N
        IF (NDEG(I) >= LOWDG) CYCLE
        IF (RENUM(I) > 0) CYCLE
        LOWDG = NDEG(I)
        STNODE = I
      END DO
      ! FIND PSEUDO-DIAMETER AND ASSOCIATED LEVEL STRUCTURES.
      ! STNODE AND RVNODE ARE THE ENDS OF THE DIAM AND LVLS1 AND LVLS2
      ! ARE THE RESPECTIVE LEVEL STRUCTURES.
      CALL FNDIAM(STNODE, RVNODE, NDSTK, NR, NDEG, LVL, LVLS1,LVLS2, CCSTOR, IDFLT)
      IF (.not.(ndeg(stnode) <= ndeg(rvnode))) then 
        ! NFLG INDICATES THE END TO BEGIN NUMBERING ON
        NFLG = -1
        STNODE = RVNODE
      endif
      CALL SETUP(LVL, LVLS1, LVLS2)
      ! FIND ALL THE CONNECTED COMPONENTS  (XCC COUNTS THEM)
      XCC = 0
      LROOT = 1
      LVLN = 1
      DO  I=1,N
        IF (LVL(I) /= 0) CYCLE
        XCC = XCC + 1
        STPT(XCC) = LROOT
        CALL TREE(I, NDSTK, NR, LVL, CCSTOR, NDEG, LVLWTH, LVLBOT,LVLN, MAXLW, N)
        SIZEG(XCC) = LVLBOT + LVLWTH - LROOT
        LROOT = LVLBOT + LVLWTH
        LVLN = LROOT
      END DO
      if (sort2() /= 0) then 
        CALL PIKLVL(LVLS1, LVLS2, CCSTOR, IDFLT, ISDIR)
      endif
      ! ON RETURN FROM PIKLVL, ISDIR INDICATES THE DIRECTION THE LARGEST
      ! COMPONENT FELL.  ISDIR IS MODIFIED NOW TO INDICATE THE NUMBERING
      ! DIRECTION.  NUM IS SET TO THE PROPER VALUE FOR THIS DIRECTION.
      ISDIR = ISDIR*NFLG
      NUM = SBNUM
      IF (ISDIR < 0) NUM = STNUM
      CALL NUMBER(STNODE, NUM, NDSTK, LVLS2, NDEG, RENUM, LVLS1,LVL,&
           & NR, NFLG, IBW2, IPF2, CCSTOR, ISDIR)
      ! UPDATE STNUM OR SBNUM AFTER NUMBERING
      IF (ISDIR < 0) STNUM = NUM
      IF (ISDIR > 0) SBNUM = NUM
      IF (.not.(sbnum <= stnum)) exit
    end do
    IF (IBW2 > IBW1) then 
      ! IF ORIGINAL NUMBERING IS BETTER THAN NEW ONE, SET UP TO RETURN IT
      DO I=1,N
        RENUM(I) = IOLD(I)
      END DO
      IBW2 = IBW1
      IPF2 = IPF1
      !
    endif
    DEALLOCATE(SIZEG,STPT,NHIGH,NLOW,AUX,NACUM)      
    idpthe = idpth
    RETURN
  END SUBROUTINE PSB_GPS_REDUCE
  !
  SUBROUTINE DGREE(NDSTK, NR, NDEG, IOLD, IBW1, IPF1)
    !  DGREE COMPUTES THE DEGREE OF EACH NODE IN NDSTK AND STORES
    !  IT IN THE ARRAY NDEG.  THE BANDWIDTH AND PROFILE FOR THE ORIGINAL
    !  OR INPUT RENUMBERING OF THE GRAPH IS COMPUTED ALSO.
    ! USE INTEGER*2 NDSTK  WITH AN IBM 360 OR 370.
    implicit none 
    INTEGER(psb_ipk_) :: NR, IBW1, IPF1, NDSTK(NR,IDEG), NDEG(N), IOLD(N)
    ! COMMON /GRA/ N, IDPTH, IDEG
    integer(psb_ipk_) :: i, itst, j, idif, irw 

    IBW1 = 0
    IPF1 = 0
    DO  I=1,N
      NDEG(I) = 0
      IRW = 0
      DO J=1,IDEG
        ITST = NDSTK(I,J)
        IF(ITST <= 0) EXIT
        NDEG(I) = NDEG(I) + 1
        IDIF = IOLD(I) - IOLD(ITST)
        IF (IRW < IDIF) IRW = IDIF
      END DO
      IPF1 = IPF1 + IRW
      IF (IRW > IBW1) IBW1 = IRW
    END DO
    RETURN
  END SUBROUTINE DGREE
  !
  SUBROUTINE FNDIAM(SND1, SND2, NDSTK, NR, NDEG, LVL, LVLS1,LVLS2, IWK, IDFLT)
    !  FNDIAM IS THE CONTROL PROCEDURE FOR FINDING THE PSEUDO-DIAMETER OF
    !  NDSTK AS WELL AS THE LEVEL STRUCTURE FROM EACH END
    !  SND1-        ON INPUT THIS IS THE NODE NUMBER OF THE FIRST
    !               ATTEMPT AT FINDING A DIAMETER.  ON OUTPUT IT
    !               CONTAINS THE ACTUAL NUMBER USED.
    !  SND2-        ON OUTPUT CONTAINS OTHER END OF DIAMETER
    !  LVLS1-       ARRAY CONTAINING LEVEL STRUCTURE WITH SND1 AS ROOT
    !  LVLS2-       ARRAY CONTAINING LEVEL STRUCTURE WITH SND2 AS ROOT
    !  IDFLT-       FLAG USED IN PICKING FINAL LEVEL STRUCTURE, SET
    !               =1 IF WIDTH OF LVLS1 <= WIDTH OF LVLS2, OTHERWISE =2
    !  LVL,IWK-     WORKING STORAGE
    ! USE INTEGER*2 NDSTK  WITH AN IBM 360 OR 370.
    implicit none 
    INTEGER(psb_ipk_) :: FLAG, SND, SND1, SND2, NR, idflt
    ! COMMON /GRA/ N, IDPTH, IDEG
    ! IT IS ASSUMED THAT THE LAST LEVEL HAS AT MOST 100 NODES.
    ! COMMON /CC/ NDLST(100)
    integer(psb_ipk_),POINTER :: NDLST(:)
    integer(psb_ipk_) :: NDSTK(NR,IDEG), NDEG(1), LVL(N), LVLS1(N), LVLS2(N),IWK(N)
    integer(psb_ipk_) :: i, j, mtw2, ndxn, ndxl, inow, lvlbot,lvln,lvlwth
    integer(psb_ipk_) :: k,mtw1, maxlw
    !
    NDLST => AUX
    !
    FLAG = 0
    MTW2 = N
    SND = SND1
    ! ZERO LVL TO INDICATE ALL NODES ARE AVAILABLE TO TREE
10  DO 20 I=1,N
       LVL(I) = 0
20  END DO
    LVLN = 1
    ! DROP A TREE FROM SND
    CALL TREE(SND, NDSTK, NR, LVL, IWK, NDEG, LVLWTH, LVLBOT,LVLN, MAXLW, MTW2)
    IF (FLAG >= 1) GO TO 50
    FLAG = 1
30  IDPTH = LVLN - 1
    MTW1 = MAXLW
    ! COPY LEVEL STRUCTURE INTO LVLS1
    DO 40 I=1,N
       LVLS1(I) = LVL(I)
40  END DO
    NDXN = 1
    NDXL = 0
    MTW2 = N
    ! SORT LAST LEVEL BY DEGREE  AND STORE IN NDLST
    CALL SORTDG(NDLST, IWK(LVLBOT), NDXL, LVLWTH, NDEG)
    SND = NDLST(1)
    GO TO 10
50  IF (IDPTH >= LVLN-1) GO TO 60
    ! START AGAIN WITH NEW STARTING NODE
    SND1 = SND
    GO TO 30
60  IF (MAXLW >= MTW2) GO TO 80
    MTW2 = MAXLW
    SND2 = SND
    ! STORE NARROWEST REVERSE LEVEL STRUCTURE IN LVLS2
    DO 70 I=1,N
       LVLS2(I) = LVL(I)
70  END DO
80  IF (NDXN == NDXL) GO TO 90
    ! TRY NEXT NODE IN NDLST
    NDXN = NDXN + 1
    SND = NDLST(NDXN)
    GO TO 10
90  IDFLT = 1
    IF (MTW2 <= MTW1) IDFLT = 2
    NULLIFY(NDLST)
    RETURN
  END SUBROUTINE FNDIAM
  !
  SUBROUTINE TREE(IROOT, NDSTK, NR, LVL, IWK, NDEG, LVLWTH, LVLBOT, LVLN, MAXLW, IBORT)
    !  TREE DROPS A TREE IN NDSTK FROM IROOT
    !  LVL-         ARRAY INDICATING AVAILABLE NODES IN NDSTK WITH ZERO
    !               ENTRIES. TREE ENTERS LEVEL NUMBERS ASSIGNED
    !               DURING EXECUTION OF THIS PROCEDURE
    !  IWK-         ON OUTPUT CONTAINS NODE NUMBERS USED IN TREE
    !               ARRANGED BY LEVELS (IWK(LVLN) CONTAINS IROOT
    !               AND IWK(LVLBOT+LVLWTH-1) CONTAINS LAST NODE ENTERED)
    !  LVLWTH-      ON OUTPUT CONTAINS WIDTH OF LAST LEVEL
    !  LVLBOT-      ON OUTPUT CONTAINS INDEX INTO IWK OF FIRST
    !               NODE IN LAST LEVEL
    !  MAXLW-       ON OUTPUT CONTAINS THE MAXIMUM LEVEL WIDTH
    !  LVLN-        ON INPUT THE FIRST AVAILABLE LOCATION IN IWK
    !               USUALLY ONE BUT IF IWK IS USED TO STORE PREVIOUS
    !               CONNECTED COMPONENTS, LVLN IS NEXT AVAILABLE LOCATION.
    !               ON OUTPUT THE TOTAL NUMBER OF LEVELS + 1
    !  IBORT-       INPUT PARAM WHICH TRIGGERS EARLY RETURN IF
    !               MAXLW BECOMES >= IBORT
    ! USE INTEGER*2 NDSTK  WITH AN IBM 360 OR 370.
    implicit none 
    integer(psb_ipk_) :: IROOT, NR, NDSTK(NR,*), LVL(*), IWK(*), NDEG(*)
    integer(psb_ipk_) :: LVLWTH, LVLBOT, LVLN, MAXLW, IBORT
    integer(psb_ipk_) :: itest, iwknow, itop, lvltop,j , inow, ndrow
    MAXLW = 0
    ITOP = LVLN
    INOW = LVLN
    LVLBOT = LVLN
    LVLTOP = LVLN + 1
    LVLN = 1
    LVL(IROOT) = 1
    IWK(ITOP) = IROOT
10  LVLN = LVLN + 1
20  IWKNOW = IWK(INOW)
    NDROW = NDEG(IWKNOW)
    DO 30 J=1,NDROW
       ITEST = NDSTK(IWKNOW,J)
       IF (LVL(ITEST) /= 0) CYCLE
       LVL(ITEST) = LVLN
       ITOP = ITOP + 1
       IWK(ITOP) = ITEST
30  END DO
    INOW = INOW + 1
    IF (INOW < LVLTOP) GO TO 20
    LVLWTH = LVLTOP - LVLBOT
    IF (MAXLW < LVLWTH) MAXLW = LVLWTH
    IF (MAXLW >= IBORT) RETURN
    IF (ITOP < LVLTOP) RETURN
    LVLBOT = INOW
    LVLTOP = ITOP + 1
    GO TO 10
  END SUBROUTINE TREE
  !
  SUBROUTINE SORTDG(STK1, STK2, X1, X2, NDEG)
    ! SORTDG SORTS STK2 BY DEGREE OF THE NODE AND ADDS IT TO THE END
    ! OF STK1 IN ORDER OF LOWEST TO HIGHEST DEGREE.  X1 AND X2 ARE THE
    ! NUMBER OF NODES IN STK1 AND STK2 RESPECTIVELY.
    implicit none 
    INTEGER(psb_ipk_) :: X1, X2, STK1, STK2, TEMP,NDEG
    ! COMMON /GRA/ N, IDPTH, IDEG
    DIMENSION NDEG(N), STK1(X1+X2), STK2(X2)
    integer(psb_ipk_) :: ind,itest,i,j,istk2,jstk2
    IND = X2
10  ITEST = 0
    IND = IND - 1
    IF (IND < 1) GO TO 30
    DO 20 I=1,IND
       J = I + 1
       ISTK2 = STK2(I)
       JSTK2 = STK2(J)
       IF (NDEG(ISTK2) <= NDEG(JSTK2)) CYCLE
       ITEST = 1
       TEMP = STK2(I)
       STK2(I) = STK2(J)
       STK2(J) = TEMP
20  END DO
    IF (ITEST == 1) GO TO 10
30  DO 40 I=1,X2
       X1 = X1 + 1
       STK1(X1) = STK2(I)
40  END DO
    RETURN
  END SUBROUTINE SORTDG
  !
  SUBROUTINE SETUP(LVL, LVLS1, LVLS2)
    ! SETUP COMPUTES THE REVERSE LEVELING INFO FROM LVLS2 AND STORES
    ! IT INTO LVLS2.  NACUM(I) IS INITIALIZED TO NODES/ITH LEVEL FOR NODES
    ! ON THE PSEUDO-DIAMETER OF THE GRAPH.  LVL IS INITIALIZED TO NON-
    ! ZERO FOR NODES ON THE PSEUDO-DIAM AND NODES IN A DIFFERENT
    ! COMPONENT OF THE GRAPH.
    !      COMMON /GRA/ N, IDPTH, IDEG
    ! IT IS ASSUMED THAT THERE ARE AT MOST 100 LEVELS.
    ! COMMON /LVLW/ NHIGH(100), NLOW(100), NACUM(100)
    use psb_base_mod
    implicit none 
    integer(psb_ipk_) :: LVL(N), LVLS1(N), LVLS2(N)
    integer(psb_ipk_) :: SZ,i,itemp
    !-----------------------------------------------------
    SZ=SIZE(NACUM)
    IF(SZ < IDPTH) THEN
       write(psb_out_unit,*) 'GPS_SETUP: on fly reallocation of NACUM'
       CALL REALLOC(NACUM,SZ,IDPTH) 
    END IF
    !-----------------------------------------------------
    DO 10 I=1,IDPTH
       NACUM(I) = 0
10  END DO
    DO 30 I=1,N
       LVL(I) = 1
       LVLS2(I) = IDPTH + 1 - LVLS2(I)
       ITEMP = LVLS2(I)
       IF (ITEMP > IDPTH) CYCLE
       IF (ITEMP /= LVLS1(I)) GO TO 20
       NACUM(ITEMP) = NACUM(ITEMP) + 1
       CYCLE
20     LVL(I) = 0
30  END DO
    RETURN
  END SUBROUTINE SETUP
  !
  FUNCTION SORT2() result(val)
    implicit none 
    INTEGER(psb_ipk_) ::  val
    ! SORT2 SORTS SIZEG AND STPT INTO DESCENDING ORDER ACCORDING TO
    ! VALUES OF SIZEG. XCC=NUMBER OF ENTRIES IN EACH ARRAY
    INTEGER(psb_ipk_) :: TEMP,ind,itest,i,j
    ! IT IS ASSUMED THAT THE GRAPH HAS AT MOST 50 CONNECTED COMPONENTS.
    !COMMON /CC/ XCC, SIZEG(50), STPT(50)

    VAL = 0
    IF (XCC == 0) RETURN
    VAL = 1
    IND = XCC
10  ITEST = 0
    IND = IND - 1
    IF (IND < 1) RETURN
    DO 20 I=1,IND
       J = I + 1
       IF (SIZEG(I) >= SIZEG(J)) CYCLE
       ITEST = 1
       TEMP = SIZEG(I)
       SIZEG(I) = SIZEG(J)
       SIZEG(J) = TEMP
       TEMP = STPT(I)
       STPT(I) = STPT(J)
       STPT(J) = TEMP
20  END DO
    IF (ITEST == 1) GO TO 10
    RETURN
  END FUNCTION SORT2
  !
  SUBROUTINE PIKLVL(LVLS1, LVLS2, CCSTOR, IDFLT, ISDIR)
    use psb_base_mod
    implicit none 
    ! PIKLVL CHOOSES THE LEVEL STRUCTURE  USED IN NUMBERING GRAPH
    ! LVLS1-       ON INPUT CONTAINS FORWARD LEVELING INFO
    ! LVLS2-       ON INPUT CONTAINS REVERSE LEVELING INFO
    !              ON OUTPUT THE FINAL LEVEL STRUCTURE CHOSEN
    ! CCSTOR-      ON INPUT CONTAINS CONNECTED COMPONENT INFO
    ! IDFLT-       ON INPUT =1 IF WDTH LVLS1 <= WDTH LVLS2, =2 OTHERWISE
    ! NHIGH        KEEPS TRACK OF LEVEL WIDTHS FOR HIGH NUMBERING
    ! NLOW-        KEEPS TRACK OF LEVEL WIDTHS FOR LOW NUMBERING
    ! NACUM-       KEEPS TRACK OF LEVEL WIDTHS FOR CHOSEN LEVEL STRUCTURE
    ! XCC-         NUMBER OF CONNECTED COMPONENTS
    ! SIZEG(I)-    SIZE OF ITH CONNECTED COMPONENT
    ! STPT(I)-     INDEX INTO CCSTORE OF 1ST NODE IN ITH CON COMPT
    ! ISDIR-       FLAG WHICH INDICATES WHICH WAY THE LARGEST CONNECTED
    !              COMPONENT FELL.  =+1 IF LOW AND -1 IF HIGH
    ! COMMON /GRA/ N, IDPTH, IDEG
    ! IT IS ASSUMED THAT THE GRAPH HAS AT MOST 50 COMPONENTS AND
    ! THAT THERE ARE AT MOST 100 LEVELS.
    ! COMMON /LVLW/ NHIGH(100), NLOW(100), NACUM(100)
    ! COMMON /CC/ XCC, SIZEG(50), STPT(50)
    INTEGER(psb_ipk_) :: LVLS1(N), LVLS2(N), CCSTOR(N)
    integer(psb_ipk_) :: SZ, ENDC,i,j,max1,max2,inode
    integer(psb_ipk_) :: lvlnh, it, k, lvlnl,idflt,isdir
    ! FOR EACH CONNECTED COMPONENT DO
    DO 80 I=1,XCC
       J = STPT(I)
       ENDC= SIZEG(I) + J - 1
       ! SET NHIGH AND NLOW EQUAL TO NACUM
       !-----------------------------------------------------
       SZ=SIZE(NHIGH)
       IF(SZ < IDPTH) THEN
          write(psb_out_unit,*) 'GPS_PIKLVL: on fly reallocation of NHIGH'
          CALL REALLOC(NHIGH,SZ,IDPTH) 
       END IF
       SZ=SIZE(NLOW)
       IF(SZ < IDPTH) THEN
          write(psb_out_unit,*) 'GPS_PIKLVL: on fly reallocation of NLOW'
          CALL REALLOC(NLOW,SZ,IDPTH) 
       END IF
       !-----------------------------------------------------
       DO 10 K=1,IDPTH
          NHIGH(K) = NACUM(K)
          NLOW(K) = NACUM(K)
10     END DO
       ! UPDATE NHIGH AND NLOW FOR EACH NODE IN CONNECTED COMPONENT
       DO 20 K=J,ENDC
          INODE = CCSTOR(K)
          LVLNH = LVLS1(INODE)
          NHIGH(LVLNH) = NHIGH(LVLNH) + 1
          LVLNL = LVLS2(INODE)
          NLOW(LVLNL) = NLOW(LVLNL) + 1
20     END DO
       MAX1 = 0
       MAX2 = 0
       ! SET MAX1=LARGEST NEW NUMBER IN NHIGH
       ! SET MAX2=LARGEST NEW NUMBER IN NLOW
       DO 30 K=1,IDPTH
          IF (2*NACUM(K) == NLOW(K)+NHIGH(K)) CYCLE
          IF (NHIGH(K) > MAX1) MAX1 = NHIGH(K)
          IF (NLOW(K) > MAX2) MAX2 = NLOW(K)
30     END DO
       ! SET IT= NUMBER OF LEVEL STRUCTURE TO BE USED
       IT = 1
       IF (MAX1 > MAX2) IT = 2
       IF (MAX1 == MAX2) IT = IDFLT
       IF (IT == 2) GO TO 60
       IF (I == 1) ISDIR = -1
       ! COPY LVLS1 INTO LVLS2 FOR EACH NODE IN CONNECTED COMPONENT
       DO 40 K=J,ENDC
          INODE = CCSTOR(K)
          LVLS2(INODE) = LVLS1(INODE)
40     END DO
       ! UPDATE NACUM TO BE THE SAME AS NHIGH
       DO 50 K=1,IDPTH
          NACUM(K) = NHIGH(K)
50     END DO
       CYCLE
       ! UPDATE NACUM TO BE THE SAME AS NLOW
60     DO 70 K=1,IDPTH
          NACUM(K) = NLOW(K)
70     END DO
80  END DO
    RETURN
  END SUBROUTINE PIKLVL
  !
  SUBROUTINE NUMBER(SND, NUM, NDSTK, LVLS2, NDEG, RENUM, LVLST,LSTPT,&
       & NR, NFLG, IBW2, IPF2, IPFA, ISDIR)
    use psb_base_mod
    implicit none 
    !  NUMBER PRODUCES THE NUMBERING OF THE GRAPH FOR MIN BANDWIDTH
    !  SND-         ON INPUT THE NODE TO BEGIN NUMBERING ON
    !  NUM-         ON INPUT AND OUTPUT, THE NEXT AVAILABLE NUMBER
    !  LVLS2-       THE LEVEL STRUCTURE TO BE USED IN NUMBERING
    !  RENUM-       THE ARRAY USED TO STORE THE NEW NUMBERING
    !  LVLST-       ON OUTPUT CONTAINS LEVEL STRUCTURE
    !  LSTPT(I)-    ON OUTPUT, INDEX INTO LVLST TO FIRST NODE IN ITH LVL
    !               LSTPT(I+1) - LSTPT(I) = NUMBER OF NODES IN ITH LVL
    !  NFLG-        =+1 IF SND IS FORWARD END OF PSEUDO-DIAM
    !               =-1 IF SND IS REVERSE END OF PSEUDO-DIAM
    !  IBW2-        BANDWIDTH OF NEW NUMBERING COMPUTED BY NUMBER
    !  IPF2-        PROFILE OF NEW NUMBERING COMPUTED BY NUMBER
    !  IPFA-        WORKING STORAGE USED TO COMPUTE PROFILE AND BANDWIDTH
    !  ISDIR-       INDICATES STEP DIRECTION USED IN NUMBERING(+1 OR -1)
    ! USE INTEGER*2 NDSTK  WITH AN IBM 360 OR 370.
    INTEGER(psb_ipk_) :: SND, NUM, XA, XB, XC, XD, CX, ENDC, TEST, NR, ISDIR
    ! COMMON /GRA/ N, IDPTH, IDEG
    ! THE STORAGE IN COMMON BLOCKS CC AND LVLW IS NOW FREE AND CAN
    ! BE USED FOR STACKS.
    !COMMON /LVLW/ STKA(100), STKB(100), STKC(100)
    !COMMON /CC/ STKD(100)
    INTEGER(psb_ipk_) :: IPFA(N), NDSTK(NR,IDEG), LVLS2(N),&
         & NDEG(N), RENUM(N+1), LVLST(N),LSTPT(N),ipf2,ibw2,nflg, nbw
    integer(psb_ipk_),POINTER :: STKA(:),STKB(:),STKC(:),STKD(:)
    integer(psb_ipk_) :: SZ1,SZ2,i,j,nstpt,lvln, lst, lnd, inx, max, ipro,&
         & lvlnl, k, it
    !
    STKA => NHIGH
    STKB => NLOW
    STKC => NACUM
    STKD => AUX
    !
    ! SET UP LVLST AND LSTPT FROM LVLS2
    DO 10 I=1,N
       IPFA(I) = 0
10  END DO
    NSTPT = 1
    DO 30 I=1,IDPTH
       LSTPT(I) = NSTPT
       DO 20 J=1,N
          IF (LVLS2(J) /= I) CYCLE
          LVLST(NSTPT) = J
          NSTPT = NSTPT + 1
20     END DO
30  END DO
    LSTPT(IDPTH+1) = NSTPT
    ! STKA, STKB, STKC AND STKD ARE STACKS WITH POINTERS
    ! XA,XB,XC, AND XD.  CX IS A SPECIAL POINTER INTO STKC WHICH
    ! INDICATES THE PARTICULAR NODE BEING PROCESSED.
    ! LVLN KEEPS TRACK OF THE LEVEL WE ARE WORKING AT.
    ! INITIALLY STKC CONTAINS ONLY THE INITIAL NODE, SND.
    LVLN = 0
    IF (NFLG < 0) LVLN = IDPTH + 1
    XC = 1
    STKC(XC) = SND
40  CX = 1
    XD = 0
    LVLN = LVLN + NFLG
    LST = LSTPT(LVLN)
    LND = LSTPT(LVLN+1) - 1
    ! BEGIN PROCESSING NODE STKC(CX)
50  IPRO = STKC(CX)
    RENUM(IPRO) = NUM
    NUM = NUM + ISDIR
    ENDC = NDEG(IPRO)
    XA = 0
    XB = 0
    ! CHECK ALL ADJACENT NODES
    DO 80 I=1,ENDC
       TEST = NDSTK(IPRO,I)
       INX = RENUM(TEST)
       ! ONLY NODES NOT NUMBERED OR ALREADY ON A STACK ARE ADDED
       IF (INX == 0) GO TO 60
       IF (INX < 0) CYCLE
       ! DO PRELIMINARY BANDWIDTH AND PROFILE CALCULATIONS
       NBW = (RENUM(IPRO)-INX)*ISDIR
       IF (ISDIR > 0) INX = RENUM(IPRO)
       IF (IPFA(INX) < NBW) IPFA(INX) = NBW
       CYCLE
60     RENUM(TEST) = -1
       ! PUT NODES ON SAME LEVEL ON STKA, ALL OTHERS ON STKB
       IF (LVLS2(TEST) == LVLS2(IPRO)) GO TO 70
       XB = XB + 1
       STKB(XB) = TEST
       CYCLE
70     XA = XA + 1
       STKA(XA) = TEST
80  END DO
    ! SORT STKA AND STKB INTO INCREASING DEGREE AND ADD STKA TO STKC
    ! AND STKB TO STKD
    IF (XA == 0) GO TO 100
    IF (XA == 1) GO TO 90
    !-----------------------------------------------------------------
    SZ1=SIZE(STKC)
    SZ2=XC+XA
    IF(SZ1 < SZ2) THEN
       write(psb_out_unit,*) 'GPS_NUMBER - Check #1: on fly reallocation of STKC'
       CALL REALLOC(NACUM,SZ1,SZ2)
       STKC => NACUM
    END IF
    !-----------------------------------------------------------------
    CALL SORTDG(STKC, STKA, XC, XA, NDEG)
    GO TO 100
90  XC = XC + 1
    !-----------------------------------------------------------------
    SZ1=SIZE(STKC)
    SZ2=XC
    IF(SZ1 < SZ2) THEN
       write(psb_out_unit,*) 'GPS_NUMBER - Check #2: on fly reallocation of STKC'
       SZ2=SZ2+INIT
       CALL REALLOC(NACUM,SZ1,SZ2)
       STKC => NACUM
    END IF
    !-----------------------------------------------------------------
    STKC(XC) = STKA(XA)
100 IF (XB == 0) GO TO 120
    IF (XB == 1) GO TO 110
    !-----------------------------------------------------------------
    SZ1=SIZE(STKD)
    SZ2=XD+XB
    IF(SZ1 < SZ2) THEN
       write(psb_out_unit,*) 'GPS_NUMBER - Check #3: on fly reallocation of STKD'
       CALL REALLOC(AUX,SZ1,SZ2)
       STKD => AUX
    END IF
    !-----------------------------------------------------------------
    CALL SORTDG(STKD, STKB, XD, XB, NDEG)
    GO TO 120
110 XD = XD + 1
    !-----------------------------------------------------------------
    SZ1=SIZE(STKD)
    SZ2=XD
    IF(SZ1 < SZ2) THEN
       write(psb_out_unit,*) 'GPS_NUMBER - Check #4: on fly reallocation of STKD'
       SZ2=SZ2+INIT
       CALL REALLOC(AUX,SZ1,SZ2)
       STKD => AUX
    END IF
    !-----------------------------------------------------------------
    STKD(XD) = STKB(XB)
    ! BE SURE TO PROCESS ALL NODES IN STKC
120 CX = CX + 1
    IF (XC >= CX) GO TO 50
    ! WHEN STKC IS EXHAUSTED LOOK FOR MIN DEGREE NODE IN SAME LEVEL
    ! WHICH HAS NOT BEEN PROCESSED
    MAX = IDEG + 1
    SND = N + 1
    DO 130 I=LST,LND
       TEST = LVLST(I)
       IF (RENUM(TEST) /= 0) CYCLE
       IF (NDEG(TEST) >= MAX) CYCLE
       RENUM(SND) = 0
       RENUM(TEST) = -1
       MAX = NDEG(TEST)
       SND = TEST
130 END DO
    IF (SND == N+1) GO TO 140
    XC = XC + 1
    !-----------------------------------------------------------------
    SZ1=SIZE(STKC)
    SZ2=XC
    IF(SZ1 < SZ2) THEN
       write(psb_out_unit,*) 'GPS_NUMBER - Check #5: on fly reallocation of STKC'
       SZ2=SZ2+INIT
       CALL REALLOC(NACUM,SZ1,SZ2)
       STKC => NACUM
    END IF
    !-----------------------------------------------------------------
    STKC(XC) = SND
    GO TO 50
    ! IF STKD IS EMPTY WE ARE DONE, OTHERWISE COPY STKD ONTO STKC
    ! AND BEGIN PROCESSING NEW STKC
140 IF (XD == 0) GO TO 160
    !-----------------------------------------------------------------
    SZ1=SIZE(STKC)
    SZ2=XD
    IF(SZ1 < SZ2) THEN
       write(psb_out_unit,*) 'GPS_NUMBER - Check #6: on fly reallocation of STKC'
       SZ2=SZ2+INIT
       CALL REALLOC(NACUM,SZ1,SZ2)
       STKC => NACUM
    END IF
    !-----------------------------------------------------------------
    DO 150 I=1,XD
       STKC(I) = STKD(I)
150 END DO
    XC = XD
    GO TO 40
    ! DO FINAL BANDWIDTH AND PROFILE CALCULATIONS
160 DO 170 I=1,N
       IF (IPFA(I) > IBW2) IBW2 = IPFA(I)
       IPF2 = IPF2 + IPFA(I)
170 END DO
    !
    RETURN
  END SUBROUTINE NUMBER
  !
  ! ---------------------------------------------------------
  SUBROUTINE REALLOC(VET,SZ1,SZ2)
    use psb_base_mod  
    ! PERFORM ON FLY REALLOCATION OF POINTER VET INCREASING
    ! ITS SIZE FROM SZ1 TO SZ2
    IMPLICIT NONE
    integer(psb_ipk_),allocatable  :: VET(:)
    integer(psb_ipk_) :: SZ1,SZ2,INFO
    
    call psb_realloc(sz2,vet,info)
    IF(INFO /= psb_success_) THEN
       write(psb_out_unit,*) 'Error! Memory allocation failure in REALLOC'
       STOP
    END IF
    RETURN
  END SUBROUTINE REALLOC
  !
end module psb_gps_mod

module psb_lgps_mod
  !
  use psb_base_mod, only : psb_lpk_
  public psb_lgps_reduce
  !
  ! COMMON /GRA/ N, IDPTH, IDEG
  !
  private
  ! common /CC/ XCC,SIZEG,STPT
  integer(psb_lpk_), save            :: xcc,n,idpth,ideg
  integer(psb_lpk_),allocatable,SAVE :: SIZEG(:),STPT(:)
  !
  ! COMMON /LVLW/ NHIGH,NLOW,NACUM
  integer(psb_lpk_),allocatable,target,save :: NHIGH(:),NLOW(:),NACUM(:),AUX(:)
  integer(psb_lpk_),PARAMETER :: INIT=500
  !
CONTAINS
  !
!!$  SUBROUTINE psb_gps_reduce(NDSTK, NR, IOLD, RENUM, NDEG, LVL, LVLS1, LVLS2,&
!!$       & CCSTOR, IBW2, IPF2,NE,IDPTHE,IDEGE)
  SUBROUTINE psb_lgps_reduce(NDSTK, NR, IDEGE, IOLD, RENUM, NDEG,ibw2,ipf2,IDPTHE)
    !  SUBROUTINE REDUCE DETERMINES A ROW AND COLUMN PERMUTATION WHICH,
    !  WHEN APPLIED TO A GIVEN SPARSE MATRIX, PRODUCES A PERMUTED
    !  MATRIX WITH A SMALLER BANDWIDTH AND PROFILE.
    !  THE INPUT ARRAY IS A CONNECTION TABLE WHICH REPRESENTS THE
    !  INDICES OF THE NONZERO ELEMENTS OF THE MATRIX, A.  THE ALGO-
    !  RITHM IS DESCRIBED IN TERMS OF THE ADJACENCY GRAPH WHICH
    !  HAS THE CHARACTERISTIC THAT THERE IS AN EDGE (CONNECTION)
    !  BETWEEN NODES I AND J IF A(I,J) /= 0 AND I /= J.
    !  DIMENSIONING INFORMATION--THE FOLLOWING INTEGER ARRAYS MUST BE
    !  DIMENSIONED IN THE CALLING ROUTINE.
    !    NDSTK(NR,D1)        D1 IS >= MAXIMUM DEGREE OF ALL NODES.
    !    IOLD(D2)            D2 AND NR ARE >= THE TOTAL NUMBER OF
    !    RENUM(D2+1)         NODES IN THE GRAPH.
    !    NDEG(D2)            STORAGE REQUIREMENTS CAN BE SIGNIFICANTLY
    !    LVL(D2)             DECREASED FOR IBM 360 AND 370 COMPUTERS
    !    LVLS1(D2)           BY REPLACING INTEGER NDSTK BY
    !    LVLS2(D2)           INTEGER*2 NDSTK IN SUBROUTINES REDUCE,
    !    CCSTOR(D2)          DGREE, FNDIAM, TREE AND NUMBER.
    !  COMMON INFORMATION--THE FOLLOWING COMMON BLOCK MUST BE IN THE
    !  CALLING ROUTINE.
    !    COMMON/GRA/N,IDPTH,IDEG
    !  EXPLANATION OF INPUT VARIABLES--
    !    NDSTK-     CONNECTION TABLE REPRESENTING GRAPH.
    !               NDSTK(I,J)=NODE NUMBER OF JTH CONNECTION TO NODE
    !               NUMBER I.  A CONNECTION OF A NODE TO ITSELF IS NOT
    !               LISTED.  EXTRA POSITIONS MUST HAVE ZERO FILL.
    !    NR-        ROW DIMENSION ASSIGNED NDSTK IN CALLING PROGRAM.
    !    IOLD(I)-   NUMBERING OF ITH NODE UPON INPUT.
    !               IF NO NUMBERING EXISTS THEN IOLD(I)=I.
    !    N-         NUMBER OF NODES IN GRAPH (EQUAL TO ORDER OF MATRIX).
    !    IDEG-      MAXIMUM DEGREE OF ANY NODE IN THE GRAPH.
    !  EXPLANATION OF OUTPUT VARIABLES--
    !    RENUM(I)-  THE NEW NUMBER FOR THE ITH NODE.
    !    NDEG(I)-   THE DEGREE OF THE ITH NODE.
    !    IBW2-      THE BANDWIDTH AFTER RENUMBERING.
    !    IPF2-      THE PROFILE AFTER RENUMBERING.
    !    IDPTH-     NUMBER OF LEVELS IN REDUCE LEVEL STRUCTURE.
    !  THE FOLLOWING ONLY HAVE MEANING IF THE GRAPH WAS CONNECTED--
    !    LVL(I)-    INDEX INTO LVLS1 TO THE FIRST NODE IN LEVEL I.
    !               LVL(I+1)-LVL(I)= NUMBER OF NODES IN ITH LEVEL
    !    LVLS1-     NODE NUMBERS LISTED BY LEVEL.
    !    LVLS2(I)-  THE LEVEL ASSIGNED TO NODE I BY REDUCE.
    !  WORKING STORAGE VARIABLE--
    !    CCSTOR
    !  LOCAL STORAGE--
    !    COMMON/CC/-SUBROUTINES REDUCE, SORT2 AND PIKLVL ASSUME THAT
    !               THE GRAPH HAS AT MOST 50 CONNECTED COMPONENTS.
    !               SUBROUTINE FNDIAM ASSUMES THAT THERE ARE AT MOST
    !               100 NODES IN THE LAST LEVEL.
    !    COMMON/LVLW/-SUBROUTINES SETUP AND PIKLVL ASSUME THAT THERE
    !               ARE AT MOST 100 LEVELS.
    ! USE INTEGER*2 NDSTK  WITH AN IBM 360 OR 370.
    use psb_base_mod
    implicit none 
    INTEGER(psb_lpk_) :: NR, IDEGE, IBW2, IPF2, IDPTHE
    ! COMMON /GRA/ N, IDPTH, IDEG
    ! IT IS ASSUMED THAT THE GRAPH HAS AT MOST 50 CONNECTED COMPONENTS.
    ! COMMON /CC/ XCC, SIZEG(50), STPT(50)
    ! COMMON /LVLW/ NHIGH(100), NLOW(100), NACUM(100)
    integer(psb_lpk_) :: stnode, rvnode, stnum, sbnum
    integer(psb_lpk_) :: ndstk(nr,idege), iold(nr), renum(nr+1), ndeg(nr) 
    integer(psb_lpk_) :: lvl(nr), lvls1(nr), lvls2(nr), ccstor(nr)    
    integer(psb_lpk_) :: nflg, info, i, ibw1, ipf1, idflt, isdir, lroot, lowdg
    integer(psb_lpk_) :: lvlbot, lvln, lvlwth, maxlw, num
    n     = nr
    ideg  = idege
    idpth = 0

    ALLOCATE(SIZEG(NR),STPT(NR), STAT=INFO)
    IF(INFO /= psb_success_) THEN
      write(psb_out_unit,*) 'ERROR! MEMORY ALLOCATION # 1 FAILED IN GPS'
      STOP
    END IF
    !
    ALLOCATE(NHIGH(INIT), NLOW(INIT), NACUM(INIT), AUX(INIT), STAT=INFO)
    IF(INFO /= psb_success_) THEN
      write(psb_out_unit,*) 'ERROR! MEMORY ALLOCATION # 2 FAILED IN GPS'
      STOP
    END IF
    !
    IBW2 = 0
    IPF2 = 0
    ! SET RENUM(I)=0 FOR ALL I TO INDICATE NODE I IS UNNUMBERED
    DO  I=1,N
      RENUM(I) = 0
    END DO
    ! COMPUTE DEGREE OF EACH NODE AND ORIGINAL BANDWIDTH AND PROFILE
    CALL DGREE(NDSTK, NR, NDEG, IOLD, IBW1, IPF1)
    ! SBNUM= LOW END OF AVAILABLE NUMBERS FOR RENUMBERING
    ! STNUM= HIGH END OF AVAILABLE NUMBERS FOR RENUMBERING
    SBNUM = 1
    STNUM = N
    ! NUMBER THE NODES OF DEGREE ZERO
    DO I=1,N
      IF (NDEG(I) > 0) CYCLE
      RENUM(I) = STNUM
      STNUM = STNUM - 1
    END DO
    ! FIND AN UNNUMBERED NODE OF MIN DEGREE TO START ON
    do 
      LOWDG = IDEG + 1
      NFLG = 1
      ISDIR = 1
      DO  I=1,N
        IF (NDEG(I) >= LOWDG) CYCLE
        IF (RENUM(I) > 0) CYCLE
        LOWDG = NDEG(I)
        STNODE = I
      END DO
      ! FIND PSEUDO-DIAMETER AND ASSOCIATED LEVEL STRUCTURES.
      ! STNODE AND RVNODE ARE THE ENDS OF THE DIAM AND LVLS1 AND LVLS2
      ! ARE THE RESPECTIVE LEVEL STRUCTURES.
      CALL FNDIAM(STNODE, RVNODE, NDSTK, NR, NDEG, LVL, LVLS1,LVLS2, CCSTOR, IDFLT)
      IF (.not.(ndeg(stnode) <= ndeg(rvnode))) then 
        ! NFLG INDICATES THE END TO BEGIN NUMBERING ON
        NFLG = -1
        STNODE = RVNODE
      endif
      CALL SETUP(LVL, LVLS1, LVLS2)
      ! FIND ALL THE CONNECTED COMPONENTS  (XCC COUNTS THEM)
      XCC = 0
      LROOT = 1
      LVLN = 1
      DO  I=1,N
        IF (LVL(I) /= 0) CYCLE
        XCC = XCC + 1
        STPT(XCC) = LROOT
        CALL TREE(I, NDSTK, NR, LVL, CCSTOR, NDEG, LVLWTH, LVLBOT,LVLN, MAXLW, N)
        SIZEG(XCC) = LVLBOT + LVLWTH - LROOT
        LROOT = LVLBOT + LVLWTH
        LVLN = LROOT
      END DO
      if (sort2() /= 0) then 
        CALL PIKLVL(LVLS1, LVLS2, CCSTOR, IDFLT, ISDIR)
      endif
      ! ON RETURN FROM PIKLVL, ISDIR INDICATES THE DIRECTION THE LARGEST
      ! COMPONENT FELL.  ISDIR IS MODIFIED NOW TO INDICATE THE NUMBERING
      ! DIRECTION.  NUM IS SET TO THE PROPER VALUE FOR THIS DIRECTION.
      ISDIR = ISDIR*NFLG
      NUM = SBNUM
      IF (ISDIR < 0) NUM = STNUM
      CALL NUMBER(STNODE, NUM, NDSTK, LVLS2, NDEG, RENUM, LVLS1,LVL,&
           & NR, NFLG, IBW2, IPF2, CCSTOR, ISDIR)
      ! UPDATE STNUM OR SBNUM AFTER NUMBERING
      IF (ISDIR < 0) STNUM = NUM
      IF (ISDIR > 0) SBNUM = NUM
      IF (.not.(sbnum <= stnum)) exit
    end do
    IF (IBW2 > IBW1) then 
      ! IF ORIGINAL NUMBERING IS BETTER THAN NEW ONE, SET UP TO RETURN IT
      DO I=1,N
        RENUM(I) = IOLD(I)
      END DO
      IBW2 = IBW1
      IPF2 = IPF1
      !
    endif
    DEALLOCATE(SIZEG,STPT,NHIGH,NLOW,AUX,NACUM)      
    idpthe = idpth
    RETURN
  end subroutine psb_lgps_reduce
  !
  SUBROUTINE DGREE(NDSTK, NR, NDEG, IOLD, IBW1, IPF1)
    !  DGREE COMPUTES THE DEGREE OF EACH NODE IN NDSTK AND STORES
    !  IT IN THE ARRAY NDEG.  THE BANDWIDTH AND PROFILE FOR THE ORIGINAL
    !  OR INPUT RENUMBERING OF THE GRAPH IS COMPUTED ALSO.
    ! USE INTEGER*2 NDSTK  WITH AN IBM 360 OR 370.
    implicit none 
    INTEGER(psb_lpk_) :: NR, IBW1, IPF1, NDSTK(NR,IDEG), NDEG(N), IOLD(N)
    ! COMMON /GRA/ N, IDPTH, IDEG
    integer(psb_lpk_) :: i, itst, j, idif, irw 

    IBW1 = 0
    IPF1 = 0
    DO  I=1,N
      NDEG(I) = 0
      IRW = 0
      DO J=1,IDEG
        ITST = NDSTK(I,J)
        IF(ITST <= 0) EXIT
        NDEG(I) = NDEG(I) + 1
        IDIF = IOLD(I) - IOLD(ITST)
        IF (IRW < IDIF) IRW = IDIF
      END DO
      IPF1 = IPF1 + IRW
      IF (IRW > IBW1) IBW1 = IRW
    END DO
    RETURN
  END SUBROUTINE DGREE
  !
  SUBROUTINE FNDIAM(SND1, SND2, NDSTK, NR, NDEG, LVL, LVLS1,LVLS2, IWK, IDFLT)
    !  FNDIAM IS THE CONTROL PROCEDURE FOR FINDING THE PSEUDO-DIAMETER OF
    !  NDSTK AS WELL AS THE LEVEL STRUCTURE FROM EACH END
    !  SND1-        ON INPUT THIS IS THE NODE NUMBER OF THE FIRST
    !               ATTEMPT AT FINDING A DIAMETER.  ON OUTPUT IT
    !               CONTAINS THE ACTUAL NUMBER USED.
    !  SND2-        ON OUTPUT CONTAINS OTHER END OF DIAMETER
    !  LVLS1-       ARRAY CONTAINING LEVEL STRUCTURE WITH SND1 AS ROOT
    !  LVLS2-       ARRAY CONTAINING LEVEL STRUCTURE WITH SND2 AS ROOT
    !  IDFLT-       FLAG USED IN PICKING FINAL LEVEL STRUCTURE, SET
    !               =1 IF WIDTH OF LVLS1 <= WIDTH OF LVLS2, OTHERWISE =2
    !  LVL,IWK-     WORKING STORAGE
    ! USE INTEGER*2 NDSTK  WITH AN IBM 360 OR 370.
    implicit none 
    INTEGER(psb_lpk_) :: FLAG, SND, SND1, SND2, NR, idflt
    ! COMMON /GRA/ N, IDPTH, IDEG
    ! IT IS ASSUMED THAT THE LAST LEVEL HAS AT MOST 100 NODES.
    ! COMMON /CC/ NDLST(100)
    integer(psb_lpk_),POINTER :: NDLST(:)
    integer(psb_lpk_) :: NDSTK(NR,IDEG), NDEG(1), LVL(N), LVLS1(N), LVLS2(N),IWK(N)
    integer(psb_lpk_) :: i, j, mtw2, ndxn, ndxl, inow, lvlbot,lvln,lvlwth
    integer(psb_lpk_) :: k,mtw1, maxlw
    !
    NDLST => AUX
    !
    FLAG = 0
    MTW2 = N
    SND = SND1
    ! ZERO LVL TO INDICATE ALL NODES ARE AVAILABLE TO TREE
10  DO 20 I=1,N
       LVL(I) = 0
20  END DO
    LVLN = 1
    ! DROP A TREE FROM SND
    CALL TREE(SND, NDSTK, NR, LVL, IWK, NDEG, LVLWTH, LVLBOT,LVLN, MAXLW, MTW2)
    IF (FLAG >= 1) GO TO 50
    FLAG = 1
30  IDPTH = LVLN - 1
    MTW1 = MAXLW
    ! COPY LEVEL STRUCTURE INTO LVLS1
    DO 40 I=1,N
       LVLS1(I) = LVL(I)
40  END DO
    NDXN = 1
    NDXL = 0
    MTW2 = N
    ! SORT LAST LEVEL BY DEGREE  AND STORE IN NDLST
    CALL SORTDG(NDLST, IWK(LVLBOT), NDXL, LVLWTH, NDEG)
    SND = NDLST(1)
    GO TO 10
50  IF (IDPTH >= LVLN-1) GO TO 60
    ! START AGAIN WITH NEW STARTING NODE
    SND1 = SND
    GO TO 30
60  IF (MAXLW >= MTW2) GO TO 80
    MTW2 = MAXLW
    SND2 = SND
    ! STORE NARROWEST REVERSE LEVEL STRUCTURE IN LVLS2
    DO 70 I=1,N
       LVLS2(I) = LVL(I)
70  END DO
80  IF (NDXN == NDXL) GO TO 90
    ! TRY NEXT NODE IN NDLST
    NDXN = NDXN + 1
    SND = NDLST(NDXN)
    GO TO 10
90  IDFLT = 1
    IF (MTW2 <= MTW1) IDFLT = 2
    NULLIFY(NDLST)
    RETURN
  END SUBROUTINE FNDIAM
  !
  SUBROUTINE TREE(IROOT, NDSTK, NR, LVL, IWK, NDEG, LVLWTH, LVLBOT, LVLN, MAXLW, IBORT)
    !  TREE DROPS A TREE IN NDSTK FROM IROOT
    !  LVL-         ARRAY INDICATING AVAILABLE NODES IN NDSTK WITH ZERO
    !               ENTRIES. TREE ENTERS LEVEL NUMBERS ASSIGNED
    !               DURING EXECUTION OF THIS PROCEDURE
    !  IWK-         ON OUTPUT CONTAINS NODE NUMBERS USED IN TREE
    !               ARRANGED BY LEVELS (IWK(LVLN) CONTAINS IROOT
    !               AND IWK(LVLBOT+LVLWTH-1) CONTAINS LAST NODE ENTERED)
    !  LVLWTH-      ON OUTPUT CONTAINS WIDTH OF LAST LEVEL
    !  LVLBOT-      ON OUTPUT CONTAINS INDEX INTO IWK OF FIRST
    !               NODE IN LAST LEVEL
    !  MAXLW-       ON OUTPUT CONTAINS THE MAXIMUM LEVEL WIDTH
    !  LVLN-        ON INPUT THE FIRST AVAILABLE LOCATION IN IWK
    !               USUALLY ONE BUT IF IWK IS USED TO STORE PREVIOUS
    !               CONNECTED COMPONENTS, LVLN IS NEXT AVAILABLE LOCATION.
    !               ON OUTPUT THE TOTAL NUMBER OF LEVELS + 1
    !  IBORT-       INPUT PARAM WHICH TRIGGERS EARLY RETURN IF
    !               MAXLW BECOMES >= IBORT
    ! USE INTEGER*2 NDSTK  WITH AN IBM 360 OR 370.
    implicit none 
    integer(psb_lpk_) :: IROOT, NR, NDSTK(NR,*), LVL(*), IWK(*), NDEG(*)
    integer(psb_lpk_) :: LVLWTH, LVLBOT, LVLN, MAXLW, IBORT
    integer(psb_lpk_) :: itest, iwknow, itop, lvltop,j , inow, ndrow
    MAXLW = 0
    ITOP = LVLN
    INOW = LVLN
    LVLBOT = LVLN
    LVLTOP = LVLN + 1
    LVLN = 1
    LVL(IROOT) = 1
    IWK(ITOP) = IROOT
10  LVLN = LVLN + 1
20  IWKNOW = IWK(INOW)
    NDROW = NDEG(IWKNOW)
    DO 30 J=1,NDROW
       ITEST = NDSTK(IWKNOW,J)
       IF (LVL(ITEST) /= 0) CYCLE
       LVL(ITEST) = LVLN
       ITOP = ITOP + 1
       IWK(ITOP) = ITEST
30  END DO
    INOW = INOW + 1
    IF (INOW < LVLTOP) GO TO 20
    LVLWTH = LVLTOP - LVLBOT
    IF (MAXLW < LVLWTH) MAXLW = LVLWTH
    IF (MAXLW >= IBORT) RETURN
    IF (ITOP < LVLTOP) RETURN
    LVLBOT = INOW
    LVLTOP = ITOP + 1
    GO TO 10
  END SUBROUTINE TREE
  !
  SUBROUTINE SORTDG(STK1, STK2, X1, X2, NDEG)
    ! SORTDG SORTS STK2 BY DEGREE OF THE NODE AND ADDS IT TO THE END
    ! OF STK1 IN ORDER OF LOWEST TO HIGHEST DEGREE.  X1 AND X2 ARE THE
    ! NUMBER OF NODES IN STK1 AND STK2 RESPECTIVELY.
    implicit none 
    INTEGER(psb_lpk_) :: X1, X2, STK1, STK2, TEMP,NDEG
    ! COMMON /GRA/ N, IDPTH, IDEG
    DIMENSION NDEG(N), STK1(X1+X2), STK2(X2)
    integer(psb_lpk_) :: ind,itest,i,j,istk2,jstk2
    IND = X2
10  ITEST = 0
    IND = IND - 1
    IF (IND < 1) GO TO 30
    DO 20 I=1,IND
       J = I + 1
       ISTK2 = STK2(I)
       JSTK2 = STK2(J)
       IF (NDEG(ISTK2) <= NDEG(JSTK2)) CYCLE
       ITEST = 1
       TEMP = STK2(I)
       STK2(I) = STK2(J)
       STK2(J) = TEMP
20  END DO
    IF (ITEST == 1) GO TO 10
30  DO 40 I=1,X2
       X1 = X1 + 1
       STK1(X1) = STK2(I)
40  END DO
    RETURN
  END SUBROUTINE SORTDG
  !
  SUBROUTINE SETUP(LVL, LVLS1, LVLS2)
    ! SETUP COMPUTES THE REVERSE LEVELING INFO FROM LVLS2 AND STORES
    ! IT INTO LVLS2.  NACUM(I) IS INITIALIZED TO NODES/ITH LEVEL FOR NODES
    ! ON THE PSEUDO-DIAMETER OF THE GRAPH.  LVL IS INITIALIZED TO NON-
    ! ZERO FOR NODES ON THE PSEUDO-DIAM AND NODES IN A DIFFERENT
    ! COMPONENT OF THE GRAPH.
    !      COMMON /GRA/ N, IDPTH, IDEG
    ! IT IS ASSUMED THAT THERE ARE AT MOST 100 LEVELS.
    ! COMMON /LVLW/ NHIGH(100), NLOW(100), NACUM(100)
    use psb_base_mod
    implicit none 
    integer(psb_lpk_) :: LVL(N), LVLS1(N), LVLS2(N)
    integer(psb_lpk_) :: SZ,i,itemp
    !-----------------------------------------------------
    SZ=SIZE(NACUM)
    IF(SZ < IDPTH) THEN
       write(psb_out_unit,*) 'GPS_SETUP: on fly reallocation of NACUM'
       CALL REALLOC(NACUM,SZ,IDPTH) 
    END IF
    !-----------------------------------------------------
    DO 10 I=1,IDPTH
       NACUM(I) = 0
10  END DO
    DO 30 I=1,N
       LVL(I) = 1
       LVLS2(I) = IDPTH + 1 - LVLS2(I)
       ITEMP = LVLS2(I)
       IF (ITEMP > IDPTH) CYCLE
       IF (ITEMP /= LVLS1(I)) GO TO 20
       NACUM(ITEMP) = NACUM(ITEMP) + 1
       CYCLE
20     LVL(I) = 0
30  END DO
    RETURN
  END SUBROUTINE SETUP
  !
  FUNCTION SORT2() result(val)
    implicit none 
    INTEGER(psb_lpk_) ::  val
    ! SORT2 SORTS SIZEG AND STPT INTO DESCENDING ORDER ACCORDING TO
    ! VALUES OF SIZEG. XCC=NUMBER OF ENTRIES IN EACH ARRAY
    INTEGER(psb_lpk_) :: TEMP,ind,itest,i,j
    ! IT IS ASSUMED THAT THE GRAPH HAS AT MOST 50 CONNECTED COMPONENTS.
    !COMMON /CC/ XCC, SIZEG(50), STPT(50)

    VAL = 0
    IF (XCC == 0) RETURN
    VAL = 1
    IND = XCC
10  ITEST = 0
    IND = IND - 1
    IF (IND < 1) RETURN
    DO 20 I=1,IND
       J = I + 1
       IF (SIZEG(I) >= SIZEG(J)) CYCLE
       ITEST = 1
       TEMP = SIZEG(I)
       SIZEG(I) = SIZEG(J)
       SIZEG(J) = TEMP
       TEMP = STPT(I)
       STPT(I) = STPT(J)
       STPT(J) = TEMP
20  END DO
    IF (ITEST == 1) GO TO 10
    RETURN
  END FUNCTION SORT2
  !
  SUBROUTINE PIKLVL(LVLS1, LVLS2, CCSTOR, IDFLT, ISDIR)
    use psb_base_mod
    implicit none 
    ! PIKLVL CHOOSES THE LEVEL STRUCTURE  USED IN NUMBERING GRAPH
    ! LVLS1-       ON INPUT CONTAINS FORWARD LEVELING INFO
    ! LVLS2-       ON INPUT CONTAINS REVERSE LEVELING INFO
    !              ON OUTPUT THE FINAL LEVEL STRUCTURE CHOSEN
    ! CCSTOR-      ON INPUT CONTAINS CONNECTED COMPONENT INFO
    ! IDFLT-       ON INPUT =1 IF WDTH LVLS1 <= WDTH LVLS2, =2 OTHERWISE
    ! NHIGH        KEEPS TRACK OF LEVEL WIDTHS FOR HIGH NUMBERING
    ! NLOW-        KEEPS TRACK OF LEVEL WIDTHS FOR LOW NUMBERING
    ! NACUM-       KEEPS TRACK OF LEVEL WIDTHS FOR CHOSEN LEVEL STRUCTURE
    ! XCC-         NUMBER OF CONNECTED COMPONENTS
    ! SIZEG(I)-    SIZE OF ITH CONNECTED COMPONENT
    ! STPT(I)-     INDEX INTO CCSTORE OF 1ST NODE IN ITH CON COMPT
    ! ISDIR-       FLAG WHICH INDICATES WHICH WAY THE LARGEST CONNECTED
    !              COMPONENT FELL.  =+1 IF LOW AND -1 IF HIGH
    ! COMMON /GRA/ N, IDPTH, IDEG
    ! IT IS ASSUMED THAT THE GRAPH HAS AT MOST 50 COMPONENTS AND
    ! THAT THERE ARE AT MOST 100 LEVELS.
    ! COMMON /LVLW/ NHIGH(100), NLOW(100), NACUM(100)
    ! COMMON /CC/ XCC, SIZEG(50), STPT(50)
    INTEGER(psb_lpk_) :: LVLS1(N), LVLS2(N), CCSTOR(N)
    integer(psb_lpk_) :: SZ, ENDC,i,j,max1,max2,inode
    integer(psb_lpk_) :: lvlnh, it, k, lvlnl,idflt,isdir
    ! FOR EACH CONNECTED COMPONENT DO
    DO 80 I=1,XCC
       J = STPT(I)
       ENDC= SIZEG(I) + J - 1
       ! SET NHIGH AND NLOW EQUAL TO NACUM
       !-----------------------------------------------------
       SZ=SIZE(NHIGH)
       IF(SZ < IDPTH) THEN
          write(psb_out_unit,*) 'GPS_PIKLVL: on fly reallocation of NHIGH'
          CALL REALLOC(NHIGH,SZ,IDPTH) 
       END IF
       SZ=SIZE(NLOW)
       IF(SZ < IDPTH) THEN
          write(psb_out_unit,*) 'GPS_PIKLVL: on fly reallocation of NLOW'
          CALL REALLOC(NLOW,SZ,IDPTH) 
       END IF
       !-----------------------------------------------------
       DO 10 K=1,IDPTH
          NHIGH(K) = NACUM(K)
          NLOW(K) = NACUM(K)
10     END DO
       ! UPDATE NHIGH AND NLOW FOR EACH NODE IN CONNECTED COMPONENT
       DO 20 K=J,ENDC
          INODE = CCSTOR(K)
          LVLNH = LVLS1(INODE)
          NHIGH(LVLNH) = NHIGH(LVLNH) + 1
          LVLNL = LVLS2(INODE)
          NLOW(LVLNL) = NLOW(LVLNL) + 1
20     END DO
       MAX1 = 0
       MAX2 = 0
       ! SET MAX1=LARGEST NEW NUMBER IN NHIGH
       ! SET MAX2=LARGEST NEW NUMBER IN NLOW
       DO 30 K=1,IDPTH
          IF (2*NACUM(K) == NLOW(K)+NHIGH(K)) CYCLE
          IF (NHIGH(K) > MAX1) MAX1 = NHIGH(K)
          IF (NLOW(K) > MAX2) MAX2 = NLOW(K)
30     END DO
       ! SET IT= NUMBER OF LEVEL STRUCTURE TO BE USED
       IT = 1
       IF (MAX1 > MAX2) IT = 2
       IF (MAX1 == MAX2) IT = IDFLT
       IF (IT == 2) GO TO 60
       IF (I == 1) ISDIR = -1
       ! COPY LVLS1 INTO LVLS2 FOR EACH NODE IN CONNECTED COMPONENT
       DO 40 K=J,ENDC
          INODE = CCSTOR(K)
          LVLS2(INODE) = LVLS1(INODE)
40     END DO
       ! UPDATE NACUM TO BE THE SAME AS NHIGH
       DO 50 K=1,IDPTH
          NACUM(K) = NHIGH(K)
50     END DO
       CYCLE
       ! UPDATE NACUM TO BE THE SAME AS NLOW
60     DO 70 K=1,IDPTH
          NACUM(K) = NLOW(K)
70     END DO
80  END DO
    RETURN
  END SUBROUTINE PIKLVL
  !
  SUBROUTINE NUMBER(SND, NUM, NDSTK, LVLS2, NDEG, RENUM, LVLST,LSTPT,&
       & NR, NFLG, IBW2, IPF2, IPFA, ISDIR)
    use psb_base_mod
    implicit none 
    !  NUMBER PRODUCES THE NUMBERING OF THE GRAPH FOR MIN BANDWIDTH
    !  SND-         ON INPUT THE NODE TO BEGIN NUMBERING ON
    !  NUM-         ON INPUT AND OUTPUT, THE NEXT AVAILABLE NUMBER
    !  LVLS2-       THE LEVEL STRUCTURE TO BE USED IN NUMBERING
    !  RENUM-       THE ARRAY USED TO STORE THE NEW NUMBERING
    !  LVLST-       ON OUTPUT CONTAINS LEVEL STRUCTURE
    !  LSTPT(I)-    ON OUTPUT, INDEX INTO LVLST TO FIRST NODE IN ITH LVL
    !               LSTPT(I+1) - LSTPT(I) = NUMBER OF NODES IN ITH LVL
    !  NFLG-        =+1 IF SND IS FORWARD END OF PSEUDO-DIAM
    !               =-1 IF SND IS REVERSE END OF PSEUDO-DIAM
    !  IBW2-        BANDWIDTH OF NEW NUMBERING COMPUTED BY NUMBER
    !  IPF2-        PROFILE OF NEW NUMBERING COMPUTED BY NUMBER
    !  IPFA-        WORKING STORAGE USED TO COMPUTE PROFILE AND BANDWIDTH
    !  ISDIR-       INDICATES STEP DIRECTION USED IN NUMBERING(+1 OR -1)
    ! USE INTEGER*2 NDSTK  WITH AN IBM 360 OR 370.
    INTEGER(psb_lpk_) :: SND, NUM, XA, XB, XC, XD, CX, ENDC, TEST, NR, ISDIR
    ! COMMON /GRA/ N, IDPTH, IDEG
    ! THE STORAGE IN COMMON BLOCKS CC AND LVLW IS NOW FREE AND CAN
    ! BE USED FOR STACKS.
    !COMMON /LVLW/ STKA(100), STKB(100), STKC(100)
    !COMMON /CC/ STKD(100)
    INTEGER(psb_lpk_) :: IPFA(N), NDSTK(NR,IDEG), LVLS2(N),&
         & NDEG(N), RENUM(N+1), LVLST(N),LSTPT(N),ipf2,ibw2,nflg, nbw
    integer(psb_lpk_),POINTER :: STKA(:),STKB(:),STKC(:),STKD(:)
    integer(psb_lpk_) :: SZ1,SZ2,i,j,nstpt,lvln, lst, lnd, inx, max, ipro,&
         & lvlnl, k, it
    !
    STKA => NHIGH
    STKB => NLOW
    STKC => NACUM
    STKD => AUX
    !
    ! SET UP LVLST AND LSTPT FROM LVLS2
    DO 10 I=1,N
       IPFA(I) = 0
10  END DO
    NSTPT = 1
    DO 30 I=1,IDPTH
       LSTPT(I) = NSTPT
       DO 20 J=1,N
          IF (LVLS2(J) /= I) CYCLE
          LVLST(NSTPT) = J
          NSTPT = NSTPT + 1
20     END DO
30  END DO
    LSTPT(IDPTH+1) = NSTPT
    ! STKA, STKB, STKC AND STKD ARE STACKS WITH POINTERS
    ! XA,XB,XC, AND XD.  CX IS A SPECIAL POINTER INTO STKC WHICH
    ! INDICATES THE PARTICULAR NODE BEING PROCESSED.
    ! LVLN KEEPS TRACK OF THE LEVEL WE ARE WORKING AT.
    ! INITIALLY STKC CONTAINS ONLY THE INITIAL NODE, SND.
    LVLN = 0
    IF (NFLG < 0) LVLN = IDPTH + 1
    XC = 1
    STKC(XC) = SND
40  CX = 1
    XD = 0
    LVLN = LVLN + NFLG
    LST = LSTPT(LVLN)
    LND = LSTPT(LVLN+1) - 1
    ! BEGIN PROCESSING NODE STKC(CX)
50  IPRO = STKC(CX)
    RENUM(IPRO) = NUM
    NUM = NUM + ISDIR
    ENDC = NDEG(IPRO)
    XA = 0
    XB = 0
    ! CHECK ALL ADJACENT NODES
    DO 80 I=1,ENDC
       TEST = NDSTK(IPRO,I)
       INX = RENUM(TEST)
       ! ONLY NODES NOT NUMBERED OR ALREADY ON A STACK ARE ADDED
       IF (INX == 0) GO TO 60
       IF (INX < 0) CYCLE
       ! DO PRELIMINARY BANDWIDTH AND PROFILE CALCULATIONS
       NBW = (RENUM(IPRO)-INX)*ISDIR
       IF (ISDIR > 0) INX = RENUM(IPRO)
       IF (IPFA(INX) < NBW) IPFA(INX) = NBW
       CYCLE
60     RENUM(TEST) = -1
       ! PUT NODES ON SAME LEVEL ON STKA, ALL OTHERS ON STKB
       IF (LVLS2(TEST) == LVLS2(IPRO)) GO TO 70
       XB = XB + 1
       STKB(XB) = TEST
       CYCLE
70     XA = XA + 1
       STKA(XA) = TEST
80  END DO
    ! SORT STKA AND STKB INTO INCREASING DEGREE AND ADD STKA TO STKC
    ! AND STKB TO STKD
    IF (XA == 0) GO TO 100
    IF (XA == 1) GO TO 90
    !-----------------------------------------------------------------
    SZ1=SIZE(STKC)
    SZ2=XC+XA
    IF(SZ1 < SZ2) THEN
       write(psb_out_unit,*) 'GPS_NUMBER - Check #1: on fly reallocation of STKC'
       CALL REALLOC(NACUM,SZ1,SZ2)
       STKC => NACUM
    END IF
    !-----------------------------------------------------------------
    CALL SORTDG(STKC, STKA, XC, XA, NDEG)
    GO TO 100
90  XC = XC + 1
    !-----------------------------------------------------------------
    SZ1=SIZE(STKC)
    SZ2=XC
    IF(SZ1 < SZ2) THEN
       write(psb_out_unit,*) 'GPS_NUMBER - Check #2: on fly reallocation of STKC'
       SZ2=SZ2+INIT
       CALL REALLOC(NACUM,SZ1,SZ2)
       STKC => NACUM
    END IF
    !-----------------------------------------------------------------
    STKC(XC) = STKA(XA)
100 IF (XB == 0) GO TO 120
    IF (XB == 1) GO TO 110
    !-----------------------------------------------------------------
    SZ1=SIZE(STKD)
    SZ2=XD+XB
    IF(SZ1 < SZ2) THEN
       write(psb_out_unit,*) 'GPS_NUMBER - Check #3: on fly reallocation of STKD'
       CALL REALLOC(AUX,SZ1,SZ2)
       STKD => AUX
    END IF
    !-----------------------------------------------------------------
    CALL SORTDG(STKD, STKB, XD, XB, NDEG)
    GO TO 120
110 XD = XD + 1
    !-----------------------------------------------------------------
    SZ1=SIZE(STKD)
    SZ2=XD
    IF(SZ1 < SZ2) THEN
       write(psb_out_unit,*) 'GPS_NUMBER - Check #4: on fly reallocation of STKD'
       SZ2=SZ2+INIT
       CALL REALLOC(AUX,SZ1,SZ2)
       STKD => AUX
    END IF
    !-----------------------------------------------------------------
    STKD(XD) = STKB(XB)
    ! BE SURE TO PROCESS ALL NODES IN STKC
120 CX = CX + 1
    IF (XC >= CX) GO TO 50
    ! WHEN STKC IS EXHAUSTED LOOK FOR MIN DEGREE NODE IN SAME LEVEL
    ! WHICH HAS NOT BEEN PROCESSED
    MAX = IDEG + 1
    SND = N + 1
    DO 130 I=LST,LND
       TEST = LVLST(I)
       IF (RENUM(TEST) /= 0) CYCLE
       IF (NDEG(TEST) >= MAX) CYCLE
       RENUM(SND) = 0
       RENUM(TEST) = -1
       MAX = NDEG(TEST)
       SND = TEST
130 END DO
    IF (SND == N+1) GO TO 140
    XC = XC + 1
    !-----------------------------------------------------------------
    SZ1=SIZE(STKC)
    SZ2=XC
    IF(SZ1 < SZ2) THEN
       write(psb_out_unit,*) 'GPS_NUMBER - Check #5: on fly reallocation of STKC'
       SZ2=SZ2+INIT
       CALL REALLOC(NACUM,SZ1,SZ2)
       STKC => NACUM
    END IF
    !-----------------------------------------------------------------
    STKC(XC) = SND
    GO TO 50
    ! IF STKD IS EMPTY WE ARE DONE, OTHERWISE COPY STKD ONTO STKC
    ! AND BEGIN PROCESSING NEW STKC
140 IF (XD == 0) GO TO 160
    !-----------------------------------------------------------------
    SZ1=SIZE(STKC)
    SZ2=XD
    IF(SZ1 < SZ2) THEN
       write(psb_out_unit,*) 'GPS_NUMBER - Check #6: on fly reallocation of STKC'
       SZ2=SZ2+INIT
       CALL REALLOC(NACUM,SZ1,SZ2)
       STKC => NACUM
    END IF
    !-----------------------------------------------------------------
    DO 150 I=1,XD
       STKC(I) = STKD(I)
150 END DO
    XC = XD
    GO TO 40
    ! DO FINAL BANDWIDTH AND PROFILE CALCULATIONS
160 DO 170 I=1,N
       IF (IPFA(I) > IBW2) IBW2 = IPFA(I)
       IPF2 = IPF2 + IPFA(I)
170 END DO
    !
    RETURN
  END SUBROUTINE NUMBER
  !
  ! ---------------------------------------------------------
  SUBROUTINE REALLOC(VET,SZ1,SZ2)
    use psb_base_mod  
    ! PERFORM ON FLY REALLOCATION OF POINTER VET INCREASING
    ! ITS SIZE FROM SZ1 TO SZ2
    IMPLICIT NONE
    integer(psb_lpk_),allocatable  :: VET(:)
    integer(psb_lpk_) :: SZ1,SZ2
    integer(psb_ipk_) :: info 
    call psb_realloc(sz2,vet,info)
    IF(INFO /= psb_success_) THEN
       write(psb_out_unit,*) 'Error! Memory allocation failure in REALLOC'
       STOP
    END IF
    RETURN
  END SUBROUTINE REALLOC
  !
end module psb_lgps_mod