In order to build AMG4PSBLAS, the first step is to use the configure script in the main directory to generate the necessary makefile.
DA RISCRIVERE
As a minimal example consider the following:
./configure --with-psblas=PSB-INSTALL-DIR
which assumes that the various MPI compilers and support libraries are available in the standard directories on the system, and specifies only the PSBLAS install directory (note that the latter directory must be specified with an absolute path). The full set of options may be looked at by issuing the command ./configure --help, which produces:
‘configure’ configures MLD2P4 2.1.1 to adapt to many kinds of systems.
Usage: ./configure [OPTION]... [VAR=VALUE]...
To assign environment variables (e.g., CC, CFLAGS...), specify them as
VAR=VALUE. See below for descriptions of some of the useful variables.
Defaults for the options are specified in brackets.
Configuration:
-h, --help display this help and exit
--help=short display options specific to this package
--help=recursive display the short help of all the included packages
-V, --version display version information and exit
-q, --quiet, --silent do not print ‘checking ...’ messages
--cache-file=FILE cache test results in FILE [disabled]
-C, --config-cache alias for ‘--cache-file=config.cache’
-n, --no-create do not create output files
--srcdir=DIR find the sources in DIR [configure dir or ‘..’]
Installation directories:
--prefix=PREFIX install architecture-independent files in PREFIX
[/usr/local]
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
[PREFIX]
By default, ‘make install’ will install all the files in
‘/usr/local/bin’, ‘/usr/local/lib’ etc. You can specify
an installation prefix other than ‘/usr/local’ using ‘--prefix’,
for instance ‘--prefix=$HOME’.
For better control, use the options below.
Fine tuning of the installation directories:
--bindir=DIR user executables [EPREFIX/bin]
--sbindir=DIR system admin executables [EPREFIX/sbin]
--libexecdir=DIR program executables [EPREFIX/libexec]
--sysconfdir=DIR read-only single-machine data [PREFIX/etc]
--sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
--localstatedir=DIR modifiable single-machine data [PREFIX/var]
--libdir=DIR object code libraries [EPREFIX/lib]
--includedir=DIR C header files [PREFIX/include]
--oldincludedir=DIR C header files for non-gcc [/usr/include]
--datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
--datadir=DIR read-only architecture-independent data [DATAROOTDIR]
--infodir=DIR info documentation [DATAROOTDIR/info]
--localedir=DIR locale-dependent data [DATAROOTDIR/locale]
--mandir=DIR man documentation [DATAROOTDIR/man]
--docdir=DIR documentation root [DATAROOTDIR/doc/mld2p4]
--htmldir=DIR html documentation [DOCDIR]
--dvidir=DIR dvi documentation [DOCDIR]
--pdfdir=DIR pdf documentation [DOCDIR]
--psdir=DIR ps documentation [DOCDIR]
Program names:
--program-prefix=PREFIX prepend PREFIX to installed program names
--program-suffix=SUFFIX append SUFFIX to installed program names
--program-transform-name=PROGRAM run sed PROGRAM on installed program names
Optional Features:
--disable-option-checking ignore unrecognized --enable/--with options
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--enable-silent-rules less verbose build output (undo: "make V=1")
--disable-silent-rules verbose build output (undo: "make V=0")
--enable-dependency-tracking
do not reject slow dependency extractors
--disable-dependency-tracking
speeds up one-time build
--enable-serial Specify whether to enable a fake mpi library to run
in serial mode.
--enable-long-integers Specify usage of 64 bits integers.
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--with-psblas=DIR The install directory for PSBLAS, for example,
--with-psblas=/opt/packages/psblas-3.5
--with-psblas-incdir=DIR
Specify the directory for PSBLAS C includes.
--with-psblas-moddir=DIR
Specify the directory for PSBLAS Fortran modules.
--with-psblas-libdir=DIR
Specify the directory for PSBLAS library.
--with-ccopt additional [CCOPT] flags to be added: will prepend
to [CCOPT]
--with-fcopt additional [FCOPT] flags to be added: will prepend
to [FCOPT]
--with-libs List additional link flags here. For example,
--with-libs=-lspecial_system_lib or
--with-libs=-L/path/to/libs
--with-clibs additional [CLIBS] flags to be added: will prepend
to [CLIBS]
--with-flibs additional [FLIBS] flags to be added: will prepend
to [FLIBS]
--with-library-path additional [LIBRARYPATH] flags to be added: will
prepend to [LIBRARYPATH]
--with-include-path additional [INCLUDEPATH] flags to be added: will
prepend to [INCLUDEPATH]
--with-module-path additional [MODULE_PATH] flags to be added: will
prepend to [MODULE_PATH]
--with-extra-libs List additional link flags here. For example,
--with-extra-libs=-lspecial_system_lib or
--with-extra-libs=-L/path/to/libs
--with-blas=<lib> use BLAS library <lib>
--with-blasdir=<dir> search for BLAS library in <dir>
--with-lapack=<lib> use LAPACK library <lib>
--with-mumps=LIBNAME Specify the libname for MUMPS. Default: autodetect
with minimum "-lmumps_common -lpord"
--with-mumpsdir=DIR Specify the directory for MUMPS library and
includes. Note: you will need to add auxiliary
libraries with --extra-libs; this depends on how
MUMPS was configured and installed, at a minimum you
will need SCALAPACK and BLAS
--with-mumpsincdir=DIR Specify the directory for MUMPS includes.
--with-mumpsmoddir=DIR Specify the directory for MUMPS Fortran modules.
--with-mumpslibdir=DIR Specify the directory for MUMPS library.
--with-umfpack=LIBNAME Specify the library name for UMFPACK and its support
libraries. Default: "-lumfpack -lamd"
--with-umfpackdir=DIR Specify the directory for UMFPACK library and
includes.
--with-umfpackincdir=DIR
Specify the directory for UMFPACK includes.
--with-umfpacklibdir=DIR
Specify the directory for UMFPACK library.
--with-superlu=LIBNAME Specify the library name for SUPERLU library.
Default: "-lsuperlu"
--with-superludir=DIR Specify the directory for SUPERLU library and
includes.
--with-superluincdir=DIR
Specify the directory for SUPERLU includes.
--with-superlulibdir=DIR
Specify the directory for SUPERLU library.
--with-superludist=LIBNAME
Specify the libname for SUPERLUDIST library.
Requires you also specify SuperLU. Default:
"-lsuperlu_dist"
--with-superludistdir=DIR
Specify the directory for SUPERLUDIST library and
includes.
--with-superludistincdir=DIR
Specify the directory for SUPERLUDIST includes.
--with-superludistlibdir=DIR
Specify the directory for SUPERLUDIST library.
Some influential environment variables:
FC Fortran compiler command
FCFLAGS Fortran compiler flags
LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
nonstandard directory <lib dir>
LIBS libraries to pass to the linker, e.g. -l<library>
CC C compiler command
CFLAGS C compiler flags
CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
you have headers in a nonstandard directory <include dir>
MPICC MPI C compiler command
MPIFC MPI Fortran compiler command
CPP C preprocessor
Use these variables to override the choices made by ‘configure’ or to help
it to find libraries and programs with nonstandard names/locations.
Report bugs to <https://github.com/sfilippone/mld2p4-2/issues>.
For instance, if a user has built and installed PSBLAS 3.7 under the /opt directory and is using the SuiteSparse package (which includes UMFPACK), then MLD2P4 might be configured with:
./configure --with-psblas=/opt/psblas-3.5/ \ --with-umfpackincdir=/usr/include/suitesparse/
Once the configure script has completed execution, it will have generated the file Make.inc which will then be used by all Makefiles in the directory tree; this file will be copied in the install directory under the name Make.inc.MLD2P4.
To use the MUMPS solver package, the user has to add the appropriate options to the configure script; by default we are looking for the libraries -ldmumps -lsmumps -lzmumps -lcmumps -mumps_common -lpord. MUMPS often uses additional packages such as ScaLAPACK, ParMETIS, SCOTCH, as well as enabling OpenMP; in such cases it is necessary to add linker options with the --with-extra-libs configure option.
To build the library the user will now enter
make
followed (optionally) by
make install