5.2 Method set

call p%set(what,val,info [,ilev, ilmax, pos, idx])

This method sets the parameters defining the preconditioner p. More precisely, the parameter identified by what is assigned the value contained in val.

Arguments

what

character(len=*).

The parameter to be set. It can be specified through its name; the string is case-insensitive. See Tables 2-7.

val 

integer or character(len=*) or real(psb_spk_) or real(psb_dpk_), intent(in).

The value of the parameter to be set. The list of allowed values and the corresponding data types is given in Tables 2-7. When the value is of type character(len=*), it is also treated as case insensitive.

info

integer, intent(out).

Error code. If no error, 0 is returned. See Section 7 for details.

ilev

integer, optional, intent(in).

For the multilevel preconditioner, the level at which the preconditioner parameter has to be set. The levels are numbered in increasing order starting from the finest one, i.e., level 1 is the finest level. If ilev is not present, the parameter identified by what is set at all levels that are appropriate (see Tables 2-7).

ilmax

integer, optional, intent(in).

For the multilevel preconditioner, when both ilev and ilmax are present, the settings are applied at all levels ilev:ilmax. When ilev is present but ilmax is not, then the default is ilmax=ilev. The levels are numbered in increasing order starting from the finest one, i.e., level 1 is the finest level.

pos

character(len=*), optional, intent(in).

Whether the other arguments apply only to the pre-smoother (PRE) or to the post-smoother (POST). If pos is not present, the other arguments are applied to both smoothers. If the preconditioner is one-level or the parameter identified by what does not concern the smoothers, pos is ignored.

idx

integer, optional, intent(in).

An auxiliary input argument that can be passed to the underlying objects.

A variety of preconditioners can be obtained by setting the appropriate preconditioner parameters. These parameters can be logically divided into four groups, i.e., parameters defining

  1. the type of multilevel cycle and how many cycles must be applied;
  2. the coarsening algorithm;
  3. the coarse-space correction at the coarsest level (for multilevel preconditioners only);
  4. the smoother of the multilevel preconditioners, or the one-level preconditioner.

A list of the parameters that can be set, along with their allowed and default values, is given in Tables 2-7.

Remark 2. A smoother is usually obtained by combining two objects: a smoother (SMOOTHER_TYPE) and a local solver (SUB_SOLVE), as specified in Tables 6-7. For example, the block-Jacobi smoother using ILU(0) on the blocks is obtained by combining the block-Jacobi smoother object with the ILU(0) solver object. Similarly, the hybrid Gauss-Seidel smoother (see Note in Table 6) is obtained by combining the block-Jacobi smoother object with a single sweep of the Gauss-Seidel solver object, while the point-Jacobi smoother is the result of combining the block-Jacobi smoother object with a single sweep of the point-Jacobi solver object. However, for simplicity, shortcuts are provided to set point-Jacobi, hybrid (forward) Gauss-Seidel, and hybrid backward Gauss-Seidel, i.e., the previous smoothers can be defined just by setting SMOOTHER_TYPE to certain specific values (see Tables 6), without the need to set SUB_SOLVE as well.

The smoother and solver objects are arranged in a hierarchical manner. When specifying a smoother object, its parameters, including the local solver, are set to their default values, and when a solver object is specified, its defaults are also set, overriding in both cases any previous settings even if explicitly specified. Therefore if the user sets a smoother, and wishes to use a solver different from the default one, the call to set the solver must come after the call to set the smoother.

Similar considerations apply to the point-Jacobi, Gauss-Seidel and block-Jacobi coarsest-level solvers, and shortcuts are available in this case too (see Table ??).

Remark 3. Many of the coarsest-level solvers cannot be used with both the replicated and distributed coarsest-matrix layout; therefore, setting the solver after the layout may change the layout. Similarly, setting the layout after the solver may change the solver.

More precisely, UMFPACK and SuperLU require the coarsest-level matrix to be replicated, while SuperLU_Dist requires it to be distributed. In these cases, setting the coarsest-level solver implies that the layout is redefined according to the solver, ovverriding any previous settings. MUMPS, point-Jacobi, hybrid Gauss-Seidel and block-Jacobi can be applied to replicated and distributed matrices, thus their choice does not modify any previously specified layout. It is worth noting that, when the matrix is replicated, the point-Jacobi, hybrid Gauss-Seidel and block-Jacobi solvers reduce to the corresponding local solver objects (see Remark 2). For the point-Jacobi and Gauss-Seidel solvers, these objects correspond to a single point-Jacobi sweep and a single Gauss-Seidel sweep, respectively, which are very poor solvers.

On the other hand, the distributed layout can be used with any solver but UMFPACK and SuperLU; therefore, if any of these two solvers has already been selected, the coarsest-level solver is changed to block-Jacobi, with the previously chosen solver applied to the local blocks. Likewise, the replicated layout can be used with any solver but SuperLu_Dist; therefore, if SuperLu_Dist has been previously set, the coarsest-level solver is changed to the default sequential solver.

Remark 4. The argument idx can be used to allow finer control for those solvers; for instance, by specifying the keyword MUMPS_IPAR_ENTRY and an appropriate value for idx, it is possible to set any entry in the MUMPS integer control array. See also Sec. 6.







what

data type

val

default

comments






ML_CYCLE

character(len=*)

VCYCLE

WCYCLE

KCYCLE

ADD

VCYCLE

Multilevel cycle: V-cycle, W-cycle, K-cycle, and additive composition.






OUTER_SWEEPS

integer

Any integer

number 1

1

Number of multilevel cycles.







Table 2: Parameters defining the multilevel cycle and the number of cycles to be applied.


Note. The aggregation algorithm stops when at least one of the following criteria is met: the coarse size threshold,
the coarse size threshold per process, the minimum coarsening ratio, or the maximum number of levels is reached.
Therefore, the actual number of levels may be smaller than the specified maximum number of levels.





what

data type

val

default

comments






MIN_COARSE_SIZE_PER_PROCESS

integer

Any number

> 0

200

Coarse size threshold per process. The aggregation stops if the global number of variables of the computed coarsest matrix is lower than or equal to this threshold multiplied by the number of processes (see Note).






MIN_COARSE_SIZE

integer

Any number

> 0

-1

Coarse size threshold. The aggregation stops if the global number of variables of the computed coarsest matrix is lower than or equal to this threshold (see Note). If negative, it is ignored in favour of the default for MIN_COARSE_SIZE_PER_PROCESS.






MIN_CR_RATIO

real

Any number

> 1

1.5

Minimum coarsening ratio. The aggregation stops if the ratio between the global matrix dimensions at two consecutive levels is lower than or equal to this threshold (see Note).






MAX_LEVS

integer

Any integer

number > 1

20

Maximum number of levels. The aggregation stops if the number of levels reaches this value (see Note).






PAR_AGGR_ALG

character(len=*)

’DEC’, ’SYMDEC’, ’COUPLED’

’DEC’

Parallel aggregation algorithm.

the SYMDEC option applies decoupled aggregation to the sparsity pattern of A + AT .






AGGR_TYPE

character(len=*)

SOC1

SOC1, SOC2, MATCHBOXP

Type of aggregation algorithm: currently, for the decoupled aggregation we implement two measures of strength of connection, the one by Vaněk, Mandel and Brezina [30], and the one by Gratton et al [20]. The coupled aggregation is based on a parallel version of the half-approximate matching implemented in the MatchBox-P software package [8].






AGGR_SIZE

integer

Any integer

power of 2, with aggr_size 2

4

Maximum size of aggregates when the coupled aggregation based on matching is applied. For aggressive coarsening with size of aggregate larger than 8 we recommend the use of smoothed prolongators. Used only with ’COUPLED’ and ’MATCHBOXP’






AGGR_PROL

character(len=*)

SMOOTHED, UNSMOOTHED

SMOOTHED

Prolongator used by the aggregation algorithm: smoothed or unsmoothed (i.e., tentative prolongator).












Table 3: Parameters defining the aggregation algorithm.


Note. Different thresholds at different levels, such as those used in [30, Section 5.1], can be easily set by invoking the rou-
tine set with the parameter ilev.





what

data type

val

default

comments






AGGR_ORD

character(len=*)

’NATURAL’

’DEGREE’

’NATURAL’

Initial ordering of indices for the decoupled aggregation algorithm: either natural ordering or sorted by descending degrees of the nodes in the matrix graph.






AGGR_THRESH

real(kind_parameter)

Any real

number  [0,1]

0.01

The threshold θ in the strength of connection algorithm. See also the note at the bottom of this table.






AGGR_FILTER

character(len=*)

’FILTER’

’NOFILTER’

’NOFILTER’

Matrix used in computing the smoothed prolongator: filtered or unfiltered.












Table 4: Parameters defining the aggregation algorithm (continued).


Note. Defaults for COARSE_SOLVE and COARSE_SUBSOLVE are chosen in the following order:
single precision version – MUMPS if installed, then SLU if installed, ILU otherwise;
double precision version – UMF if installed, then MUMPS if installed, then SLU if installed, ILU otherwise.





what

data type

val

default

comments






COARSE_MAT

character(len=*)

DIST

REPL

REPL

Coarsest matrix layout: distributed among the processes or replicated on each of them.






COARSE_SOLVE

character(len=*)

MUMPS

UMF

SLU

SLUDIST

JACOBI

GS

BJAC

RKR

See Note.

Solver used at the coarsest level: sequential LU from MUMPS, UMFPACK, or SuperLU (plus triangular solve); distributed LU from MUMPS or SuperLU_Dist (plus triangular solve); point-Jacobi, hybrid Gauss-Seidel or block-Jacobi and related 1-versions; preconditioned Conjugate Gradient coupled with the block-Jacobi preconditioner with ILU(0) on the blocks. Note that UMF and SLU require the coarsest matrix to be replicated, SLUDIST, JACOBI, GS, BJAC and PCG require it to be distributed, MUMPS can be used with either a replicated or a distributed matrix. When any of the previous solvers is specified, the matrix layout is set to a default value which allows the use of the solver (see Remark 3, p. 24). Note also that UMFPACK and SuperLU_Dist are available only in double precision.






COARSE_SUBSOLVE

character(len=*)

ILU

ILUT

MILU

MUMPS

SLU

UMF

INVT

INVK

AINV

See Note.

Solver for the diagonal blocks of the coarse matrix, in case the block Jacobi solver is chosen as coarsest-level solver: ILU(p), ILU(p,t), MILU(p), LU from MUMPS, SuperLU or UMFPACK (plus triangular solve). Suitable for GPUs (no triangular solve) approximate inverse solvers INVK(p,q), INVT(p1,p2,t1,t2) and AINV(t), see [2]. Note that UMFPACK and SuperLU_Dist are available only in double precision.











what

data type

val

default

comments






COARSE_SWEEPS

integer

Any integer

number > 0

10

Number of sweeps when JACOBI, GS or BJAC is chosen as coarsest-level solver. Aggiungere criterio di arresto del PCG?






COARSE_FILLIN

integer

Any integer

number 0

0

Fill-in level p of the ILU factorizations.






COARSE_ILUTHRS

real(kind_parameter)

Any real

number 0

0

Drop tolerance t in the ILU(p,t) factorization.







Table 5: Parameters defining the coarse-space correction at the coarsest level (continued).







what

data type

val

default

comments






SMOOTHER_TYPE

character(len=*)

JACOBI

GS

BGS

BJAC

AS

FBGS

Type of smoother used in the multilevel preconditioner: point-Jacobi, hybrid (forward) Gauss-Seidel, hybrid backward Gauss-Seidel, block-Jacobi, 1-versions? and Additive Schwarz.

It is ignored by one-level preconditioners.






SUB_SOLVE

character(len=*)

JACOBI

GS

’BGS’

ILU

ILUT

MILU

MUMPS

SLU

UMF

GS and BGS for pre- and post-smoothers of multilevel preconditioners, respectively

ILU for block-Jacobi and Additive Schwarz one-level preconditioners 1-versions?

The local solver to be used with the smoother or one-level preconditioner (see Remark 2, page 24): point-Jacobi, hybrid (forward) Gauss-Seidel, hybrid backward Gauss-Seidel, ILU(p), ILU(p,t), MILU(p), LU from MUMPS, SuperLU or UMFPACK (plus triangular solve). See Note for details on hybrid Gauss-Seidel.






SMOOTHER_SWEEPS

integer

Any integer

number 0

1

Number of sweeps of the smoother or one-level preconditioner. In the multilevel case, no pre-smother or post-smoother is used if this parameter is set to 0 together with pos=PRE or pos=POST, respectively.






SUB_OVR

integer

Any integer

number 0

1

Number of overlap layers, for Additive Schwarz only.







Table 6: Parameters defining the smoother or the details of the one-level preconditioner.







what

data type

val

default

comments






SUB_RESTR

character(len=*)

HALO

NONE

HALO

Type of restriction operator, for Additive Schwarz only: HALO for taking into account the overlap, NONE for neglecting it.

Note that HALO must be chosen for the classical Addditive Schwarz smoother and its RAS variant.






SUB_PROL

character(len=*)

SUM

NONE

NONE

Type of prolongation operator, for Additive Schwarz only: SUM for adding the contributions from the overlap, NONE for neglecting them.

Note that SUM must be chosen for the classical Additive Schwarz smoother, and NONE for its RAS variant.






SUB_FILLIN

integer

Any integer

number 0

0

Fill-in level p of the incomplete LU factorizations.






SUB_ILUTHRS

real(kind_parameter)

Any real number 0

0

Drop tolerance t in the ILU(p,t) factorization.






MUMPS_LOC_GLOB

character(len=*)

LOCAL_SOLVER

GLOBAL_SOLVER

GLOBAL_SOLVER

Whether MUMPS should be used as a distributed solver, or as a serial solver acting only on the part of the matrix local to each process.






MUMPS_IPAR_ENTRY

integer

Any integer number

0

Set an entry in the MUMPS integer control array, as chosen via the idx optional argument.






MUMPS_RPAR_ENTRY

real

Any real number

0

Set an entry in the MUMPS real control array, as chosen via the idx optional argument.







Table 7: Parameters defining the smoother or the details of the one-level preconditioner (continued).