You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
amg4psblas/mlprec/impl/mld_sprecset.F90

896 lines
28 KiB
Fortran

!!$
!!$
!!$ MLD2P4 version 2.0
!!$ MultiLevel Domain Decomposition Parallel Preconditioners Package
!!$ based on PSBLAS (Parallel Sparse BLAS version 3.0)
!!$
!!$ (C) Copyright 2008,2009,2010,2012
!!$
!!$ Salvatore Filippone University of Rome Tor Vergata
!!$ Alfredo Buttari CNRS-IRIT, Toulouse
!!$ Pasqua D'Ambra ICAR-CNR, Naples
!!$ Daniela di Serafino Second University of Naples
!!$
!!$ Redistribution and use in source and binary forms, with or without
!!$ modification, are permitted provided that the following conditions
!!$ are met:
!!$ 1. Redistributions of source code must retain the above copyright
!!$ notice, this list of conditions and the following disclaimer.
!!$ 2. Redistributions in binary form must reproduce the above copyright
!!$ notice, this list of conditions, and the following disclaimer in the
!!$ documentation and/or other materials provided with the distribution.
!!$ 3. The name of the MLD2P4 group or the names of its contributors may
!!$ not be used to endorse or promote products derived from this
!!$ software without specific written permission.
!!$
!!$ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
!!$ ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
!!$ TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
!!$ PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE MLD2P4 GROUP OR ITS CONTRIBUTORS
!!$ BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
!!$ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
!!$ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
!!$ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
!!$ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
!!$ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
!!$ POSSIBILITY OF SUCH DAMAGE.
!!$
!!$
! File: mld_sprecset.f90
!
! Subroutine: mld_sprecseti
! Version: real
!
! This routine sets the integer parameters defining the preconditioner. More
! precisely, the integer parameter identified by 'what' is assigned the value
! contained in 'val'.
! For the multilevel preconditioners, the levels are numbered in increasing
! order starting from the finest one, i.e. level 1 is the finest level.
!
! To set character and real parameters, see mld_sprecsetc and mld_sprecsetr,
! respectively.
!
!
! Arguments:
! p - type(mld_sprec_type), input/output.
! The preconditioner data structure.
! what - integer, input.
! The number identifying the parameter to be set.
! A mnemonic constant has been associated to each of these
! numbers, as reported in the MLD2P4 User's and Reference Guide.
! val - integer, input.
! The value of the parameter to be set. The list of allowed
! values is reported in the MLD2P4 User's and Reference Guide.
! info - integer, output.
! Error code.
! ilev - integer, optional, input.
! For the multilevel preconditioner, the level at which the
! preconditioner parameter has to be set.
! If nlev is not present, the parameter identified by 'what'
! is set at all the appropriate levels.
!
! NOTE: currently, the use of the argument ilev is not "safe" and is reserved to
! MLD2P4 developers. Indeed, by using ilev it is possible to set different values
! of the same parameter at different levels 1,...,nlev-1, even in cases where
! the parameter must have the same value at all the levels but the coarsest one.
! For this reason, the interface mld_precset to this routine has been built in
! such a way that ilev is not visible to the user (see mld_prec_mod.f90).
!
subroutine mld_sprecseti(p,what,val,info,ilev)
use psb_base_mod
use mld_s_prec_mod, mld_protect_name => mld_sprecseti
use mld_s_jac_smoother
use mld_s_as_smoother
use mld_s_diag_solver
use mld_s_ilu_solver
use mld_s_id_solver
#if defined(HAVE_UMF_) && 0
use mld_s_umf_solver
#endif
#if defined(HAVE_SLU_)
use mld_s_slu_solver
#endif
implicit none
! Arguments
class(mld_sprec_type), intent(inout) :: p
integer(psb_ipk_), intent(in) :: what
integer(psb_ipk_), intent(in) :: val
integer(psb_ipk_), intent(out) :: info
integer(psb_ipk_), optional, intent(in) :: ilev
! Local variables
integer(psb_ipk_) :: ilev_, nlev_
character(len=*), parameter :: name='mld_precseti'
info = psb_success_
if (.not.allocated(p%precv)) then
info = 3111
write(psb_err_unit,*) name,&
& ': Error: uninitialized preconditioner,',&
&' should call MLD_PRECINIT'
return
endif
nlev_ = size(p%precv)
if (present(ilev)) then
ilev_ = ilev
else
ilev_ = 1
end if
if ((ilev_<1).or.(ilev_ > nlev_)) then
info = -1
write(psb_err_unit,*) name,&
&': Error: invalid ILEV/NLEV combination',ilev_, nlev_
return
endif
if (what == mld_coarse_aggr_size_) then
p%coarse_aggr_size = max(val,-1)
return
end if
!
! Set preconditioner parameters at level ilev.
!
if (present(ilev)) then
if (ilev_ == 1) then
!
! Rules for fine level are slightly different.
!
select case(what)
case(mld_smoother_type_)
call onelev_set_smoother(p%precv(ilev_),val,info)
case(mld_sub_solve_)
call onelev_set_solver(p%precv(ilev_),val,info)
case(mld_smoother_sweeps_,mld_ml_type_,mld_aggr_alg_,mld_aggr_kind_,&
& mld_smoother_pos_,mld_aggr_omega_alg_,mld_aggr_eig_,&
& mld_smoother_sweeps_pre_,mld_smoother_sweeps_post_,&
& mld_sub_restr_,mld_sub_prol_, &
& mld_sub_ren_,mld_sub_ovr_,mld_sub_fillin_)
call p%precv(ilev_)%set(what,val,info)
case default
call p%precv(ilev_)%set(what,val,info)
end select
else if (ilev_ > 1) then
select case(what)
case(mld_smoother_type_)
call onelev_set_smoother(p%precv(ilev_),val,info)
case(mld_sub_solve_)
call onelev_set_solver(p%precv(ilev_),val,info)
case(mld_smoother_sweeps_,mld_ml_type_,mld_aggr_alg_,mld_aggr_kind_,&
& mld_smoother_pos_,mld_aggr_omega_alg_,mld_aggr_eig_,&
& mld_smoother_sweeps_pre_,mld_smoother_sweeps_post_,&
& mld_sub_restr_,mld_sub_prol_, &
& mld_sub_ren_,mld_sub_ovr_,mld_sub_fillin_,&
& mld_coarse_mat_)
call p%precv(ilev_)%set(what,val,info)
case(mld_coarse_subsolve_)
if (ilev_ /= nlev_) then
write(psb_err_unit,*) name,&
& ': Error: Inconsistent specification of WHAT vs. ILEV'
info = -2
return
end if
call onelev_set_solver(p%precv(ilev_),val,info)
case(mld_coarse_solve_)
if (ilev_ /= nlev_) then
write(psb_err_unit,*) name,&
& ': Error: Inconsistent specification of WHAT vs. ILEV'
info = -2
return
end if
if (nlev_ > 1) then
call p%precv(nlev_)%set(mld_coarse_solve_,val,info)
select case (val)
case(mld_bjac_)
call onelev_set_smoother(p%precv(nlev_),val,info)
#if defined(HAVE_UMF_) && 0
call onelev_set_solver(p%precv(nlev_),mld_umf_,info)
#elif defined(HAVE_SLU_)
call onelev_set_solver(p%precv(nlev_),mld_slu_,info)
#else
call onelev_set_solver(p%precv(nlev_),mld_ilu_n_,info)
#endif
call p%precv(nlev_)%set(mld_coarse_mat_,mld_distr_mat_,info)
case(mld_umf_, mld_slu_,mld_ilu_n_, mld_ilu_t_,mld_milu_n_)
call onelev_set_smoother(p%precv(nlev_),mld_bjac_,info)
call onelev_set_solver(p%precv(nlev_),val,info)
call p%precv(nlev_)%set(mld_coarse_mat_,mld_repl_mat_,info)
case(mld_sludist_)
call onelev_set_smoother(p%precv(nlev_),mld_bjac_,info)
call onelev_set_solver(p%precv(nlev_),val,info)
call p%precv(nlev_)%set(mld_coarse_mat_,mld_distr_mat_,info)
case(mld_jac_)
call onelev_set_smoother(p%precv(nlev_),mld_bjac_,info)
call onelev_set_solver(p%precv(nlev_),mld_diag_scale_,info)
call p%precv(nlev_)%set(mld_coarse_mat_,mld_distr_mat_,info)
end select
endif
case(mld_coarse_sweeps_)
if (ilev_ /= nlev_) then
write(psb_err_unit,*) name,&
& ': Error: Inconsistent specification of WHAT vs. ILEV'
info = -2
return
end if
call p%precv(nlev_)%set(mld_smoother_sweeps_,val,info)
case(mld_coarse_fillin_)
if (ilev_ /= nlev_) then
write(psb_err_unit,*) name,&
& ': Error: Inconsistent specification of WHAT vs. ILEV'
info = -2
return
end if
call p%precv(nlev_)%set(mld_sub_fillin_,val,info)
case default
call p%precv(ilev_)%set(what,val,info)
end select
endif
else if (.not.present(ilev)) then
!
! ilev not specified: set preconditioner parameters at all the appropriate
! levels
!
select case(what)
case(mld_sub_solve_)
do ilev_=1,max(1,nlev_-1)
if (.not.allocated(p%precv(ilev_)%sm)) then
write(psb_err_unit,*) name,&
& ': Error: uninitialized preconditioner component,',&
& ' should call MLD_PRECINIT'
info = -1
return
endif
call onelev_set_solver(p%precv(ilev_),val,info)
end do
case(mld_sub_restr_,mld_sub_prol_,&
& mld_sub_ren_,mld_sub_ovr_,mld_sub_fillin_)
do ilev_=1,max(1,nlev_-1)
call p%precv(ilev_)%set(what,val,info)
end do
case(mld_smoother_sweeps_)
do ilev_=1,max(1,nlev_-1)
call p%precv(ilev_)%set(what,val,info)
end do
case(mld_smoother_type_)
do ilev_=1,max(1,nlev_-1)
call onelev_set_smoother(p%precv(ilev_),val,info)
end do
case(mld_ml_type_,mld_aggr_alg_,mld_aggr_kind_,&
& mld_smoother_sweeps_pre_,mld_smoother_sweeps_post_,&
& mld_smoother_pos_,mld_aggr_omega_alg_,&
& mld_aggr_eig_,mld_aggr_filter_)
do ilev_=1,nlev_
call p%precv(ilev_)%set(what,val,info)
end do
case(mld_coarse_mat_)
if (nlev_ > 1) then
call p%precv(nlev_)%set(mld_coarse_mat_,val,info)
end if
case(mld_coarse_solve_)
if (nlev_ > 1) then
call p%precv(nlev_)%set(mld_coarse_solve_,val,info)
select case (val)
case(mld_bjac_)
call onelev_set_smoother(p%precv(nlev_),mld_bjac_,info)
#if defined(HAVE_UMF_) && 0
call onelev_set_solver(p%precv(nlev_),mld_umf_,info)
#elif defined(HAVE_SLU_)
call onelev_set_solver(p%precv(nlev_),mld_slu_,info)
#else
call onelev_set_solver(p%precv(nlev_),mld_ilu_n_,info)
#endif
call p%precv(nlev_)%set(mld_coarse_mat_,mld_distr_mat_,info)
case(mld_umf_, mld_slu_,mld_ilu_n_, mld_ilu_t_,mld_milu_n_)
call onelev_set_smoother(p%precv(nlev_),mld_bjac_,info)
call onelev_set_solver(p%precv(nlev_),val,info)
call p%precv(nlev_)%set(mld_coarse_mat_,mld_repl_mat_,info)
case(mld_sludist_)
call onelev_set_smoother(p%precv(nlev_),mld_bjac_,info)
call onelev_set_solver(p%precv(nlev_),val,info)
call p%precv(nlev_)%set(mld_coarse_mat_,mld_distr_mat_,info)
case(mld_jac_)
call onelev_set_smoother(p%precv(nlev_),mld_bjac_,info)
call onelev_set_solver(p%precv(nlev_),mld_diag_scale_,info)
call p%precv(nlev_)%set(mld_coarse_mat_,mld_distr_mat_,info)
end select
endif
case(mld_coarse_subsolve_)
if (nlev_ > 1) then
call onelev_set_solver(p%precv(nlev_),val,info)
endif
case(mld_coarse_sweeps_)
if (nlev_ > 1) then
call p%precv(nlev_)%set(mld_smoother_sweeps_,val,info)
end if
case(mld_coarse_fillin_)
if (nlev_ > 1) then
call p%precv(nlev_)%set(mld_sub_fillin_,val,info)
end if
case default
do ilev_=1,nlev_
call p%precv(ilev_)%set(what,val,info)
end do
end select
endif
contains
subroutine onelev_set_smoother(level,val,info)
type(mld_s_onelev_type), intent(inout) :: level
integer(psb_ipk_), intent(in) :: val
integer(psb_ipk_), intent(out) :: info
info = psb_success_
!
! This here requires a bit more attention.
!
select case (val)
case (mld_noprec_)
if (allocated(level%sm)) then
select type (sm => level%sm)
type is (mld_s_base_smoother_type)
! do nothing
class default
call level%sm%free(info)
if (info == 0) deallocate(level%sm)
if (info == 0) allocate(mld_s_base_smoother_type ::&
& level%sm, stat=info)
if (info == 0) allocate(mld_s_id_solver_type ::&
& level%sm%sv, stat=info)
end select
else
allocate(mld_s_base_smoother_type ::&
& level%sm, stat=info)
if (info ==0) allocate(mld_s_id_solver_type ::&
& level%sm%sv, stat=info)
endif
case (mld_jac_)
if (allocated(level%sm)) then
select type (sm => level%sm)
class is (mld_s_jac_smoother_type)
! do nothing
class default
call level%sm%free(info)
if (info == 0) deallocate(level%sm)
if (info == 0) allocate(mld_s_jac_smoother_type :: &
& level%sm, stat=info)
if (info == 0) allocate(mld_s_diag_solver_type :: &
& level%sm%sv, stat=info)
end select
else
allocate(mld_s_jac_smoother_type :: level%sm, stat=info)
if (info == 0) allocate(mld_s_diag_solver_type ::&
& level%sm%sv, stat=info)
endif
case (mld_bjac_)
if (allocated(level%sm)) then
select type (sm => level%sm)
class is (mld_s_jac_smoother_type)
! do nothing
class default
call level%sm%free(info)
if (info == 0) deallocate(level%sm)
if (info == 0) allocate(mld_s_jac_smoother_type ::&
& level%sm, stat=info)
if (info == 0) allocate(mld_s_ilu_solver_type ::&
& level%sm%sv, stat=info)
end select
else
allocate(mld_s_jac_smoother_type :: level%sm, stat=info)
if (info == 0) allocate(mld_s_ilu_solver_type ::&
& level%sm%sv, stat=info)
endif
case (mld_as_)
if (allocated(level%sm)) then
select type (sm => level%sm)
class is (mld_s_as_smoother_type)
! do nothing
class default
call level%sm%free(info)
if (info == 0) deallocate(level%sm)
if (info == 0) allocate(mld_s_as_smoother_type ::&
& level%sm, stat=info)
if (info == 0) allocate(mld_s_ilu_solver_type ::&
& level%sm%sv, stat=info)
end select
else
allocate(mld_s_as_smoother_type :: level%sm, stat=info)
if (info == 0) allocate(mld_s_ilu_solver_type ::&
& level%sm%sv, stat=info)
endif
case default
!
! Do nothing and hope for the best :)
!
end select
if (allocated(level%sm)) &
& call level%sm%default()
end subroutine onelev_set_smoother
subroutine onelev_set_solver(level,val,info)
type(mld_s_onelev_type), intent(inout) :: level
integer(psb_ipk_), intent(in) :: val
integer(psb_ipk_), intent(out) :: info
info = psb_success_
!
! This here requires a bit more attention.
!
select case (val)
case (mld_f_none_)
if (allocated(level%sm%sv)) then
select type (sv => level%sm%sv)
class is (mld_s_id_solver_type)
! do nothing
class default
call level%sm%sv%free(info)
if (info == 0) deallocate(level%sm%sv)
if (info == 0) allocate(mld_s_id_solver_type ::&
& level%sm%sv, stat=info)
end select
else
allocate(mld_s_id_solver_type :: level%sm%sv, stat=info)
endif
if (allocated(level%sm)) then
if (allocated(level%sm%sv)) &
& call level%sm%sv%default()
end if
case (mld_diag_scale_)
if (allocated(level%sm%sv)) then
select type (sv => level%sm%sv)
class is (mld_s_diag_solver_type)
! do nothing
class default
call level%sm%sv%free(info)
if (info == 0) deallocate(level%sm%sv)
if (info == 0) allocate(mld_s_diag_solver_type ::&
& level%sm%sv, stat=info)
end select
else
allocate(mld_s_diag_solver_type :: level%sm%sv, stat=info)
endif
if (allocated(level%sm)) then
if (allocated(level%sm%sv)) &
& call level%sm%sv%default()
end if
case (mld_ilu_n_,mld_milu_n_,mld_ilu_t_)
if (allocated(level%sm%sv)) then
select type (sv => level%sm%sv)
class is (mld_s_ilu_solver_type)
! do nothing
class default
call level%sm%sv%free(info)
if (info == 0) deallocate(level%sm%sv)
if (info == 0) allocate(mld_s_ilu_solver_type ::&
& level%sm%sv, stat=info)
end select
else
allocate(mld_s_ilu_solver_type :: level%sm%sv, stat=info)
endif
if (allocated(level%sm)) then
if (allocated(level%sm%sv)) &
& call level%sm%sv%default()
end if
call level%sm%sv%set(mld_sub_solve_,val,info)
#if defined(HAVE_UMF_) && 0
case (mld_umf_)
if (allocated(level%sm%sv)) then
select type (sv => level%sm%sv)
class is (mld_s_umf_solver_type)
! do nothing
class default
call level%sm%sv%free(info)
if (info == 0) deallocate(level%sm%sv)
if (info == 0) allocate(mld_s_umf_solver_type ::&
& level%sm%sv, stat=info)
end select
else
allocate(mld_s_umf_solver_type :: level%sm%sv, stat=info)
endif
if (allocated(level%sm)) then
if (allocated(level%sm%sv)) &
& call level%sm%sv%default()
end if
#endif
#ifdef HAVE_SLU_
case (mld_slu_)
if (allocated(level%sm%sv)) then
select type (sv => level%sm%sv)
class is (mld_s_slu_solver_type)
! do nothing
class default
call level%sm%sv%free(info)
if (info == 0) deallocate(level%sm%sv)
if (info == 0) allocate(mld_s_slu_solver_type ::&
& level%sm%sv, stat=info)
end select
else
allocate(mld_s_slu_solver_type :: level%sm%sv, stat=info)
endif
if (allocated(level%sm)) then
if (allocated(level%sm%sv)) &
& call level%sm%sv%default()
end if
#endif
case default
!
! Do nothing and hope for the best :)
!
end select
end subroutine onelev_set_solver
end subroutine mld_sprecseti
subroutine mld_sprecsetsm(p,val,info,ilev)
use psb_base_mod
use mld_s_prec_mod, mld_protect_name => mld_sprecsetsm
implicit none
! Arguments
class(mld_sprec_type), intent(inout) :: p
class(mld_s_base_smoother_type), intent(in) :: val
integer(psb_ipk_), intent(out) :: info
integer(psb_ipk_), optional, intent(in) :: ilev
! Local variables
integer(psb_ipk_) :: ilev_, nlev_, ilmin, ilmax
character(len=*), parameter :: name='mld_precseti'
info = psb_success_
if (.not.allocated(p%precv)) then
info = 3111
write(psb_err_unit,*) name,&
& ': Error: uninitialized preconditioner,',&
&' should call MLD_PRECINIT'
return
endif
nlev_ = size(p%precv)
if (present(ilev)) then
ilev_ = ilev
ilmin = ilev
ilmax = ilev
else
ilev_ = 1
ilmin = 1
ilmax = nlev_
end if
if ((ilev_<1).or.(ilev_ > nlev_)) then
info = -1
write(psb_err_unit,*) name,&
& ': Error: invalid ILEV/NLEV combination',ilev_, nlev_
return
endif
do ilev_ = ilmin, ilmax
if (allocated(p%precv(ilev_)%sm)) then
if (allocated(p%precv(ilev_)%sm%sv)) then
deallocate(p%precv(ilev_)%sm%sv)
endif
deallocate(p%precv(ilev_)%sm)
end if
#ifdef HAVE_MOLD
allocate(p%precv(ilev_)%sm,mold=val)
#else
allocate(p%precv(ilev_)%sm,source=val)
#endif
call p%precv(ilev_)%sm%default()
end do
end subroutine mld_sprecsetsm
subroutine mld_sprecsetsv(p,val,info,ilev)
use psb_base_mod
use mld_s_prec_mod, mld_protect_name => mld_sprecsetsv
implicit none
! Arguments
class(mld_sprec_type), intent(inout) :: p
class(mld_s_base_solver_type), intent(in) :: val
integer(psb_ipk_), intent(out) :: info
integer(psb_ipk_), optional, intent(in) :: ilev
! Local variables
integer(psb_ipk_) :: ilev_, nlev_, ilmin, ilmax
character(len=*), parameter :: name='mld_precseti'
info = psb_success_
if (.not.allocated(p%precv)) then
info = 3111
write(psb_err_unit,*) name,&
& ': Error: uninitialized preconditioner,',&
&' should call MLD_PRECINIT'
return
endif
nlev_ = size(p%precv)
if (present(ilev)) then
ilev_ = ilev
ilmin = ilev
ilmax = ilev
else
ilev_ = 1
ilmin = 1
ilmax = nlev_
end if
if ((ilev_<1).or.(ilev_ > nlev_)) then
info = -1
write(psb_err_unit,*) name,&
& ': Error: invalid ILEV/NLEV combination',ilev_, nlev_
return
endif
do ilev_ = ilmin, ilmax
if (allocated(p%precv(ilev_)%sm)) then
if (allocated(p%precv(ilev_)%sm%sv)) &
& deallocate(p%precv(ilev_)%sm%sv)
#ifdef HAVE_MOLD
allocate(p%precv(ilev_)%sm%sv,mold=val)
#else
allocate(p%precv(ilev_)%sm%sv,source=val)
#endif
call p%precv(ilev_)%sm%sv%default()
else
info = 3111
write(psb_err_unit,*) name,&
&': Error: uninitialized preconditioner component,',&
&' should call MLD_PRECINIT/MLD_PRECSET'
return
end if
end do
end subroutine mld_sprecsetsv
!
! Subroutine: mld_sprecsetc
! Version: real
!
! This routine sets the character parameters defining the preconditioner. More
! precisely, the character parameter identified by 'what' is assigned the value
! contained in 'val'.
! For the multilevel preconditioners, the levels are numbered in increasing
! order starting from the finest one, i.e. level 1 is the finest level.
!
! To set integer and real parameters, see mld_sprecseti and mld_sprecsetr,
! respectively.
!
!
! Arguments:
! p - type(mld_sprec_type), input/output.
! The preconditioner data structure.
! what - integer, input.
! The number identifying the parameter to be set.
! A mnemonic constant has been associated to each of these
! numbers, as reported in the MLD2P4 User's and Reference Guide.
! string - character(len=*), input.
! The value of the parameter to be set. The list of allowed
! values is reported in the MLD2P4 User's and Reference Guide.
! info - integer, output.
! Error code.
! ilev - integer, optional, input.
! For the multilevel preconditioner, the level at which the
! preconditioner parameter has to be set.
! If nlev is not present, the parameter identified by 'what'
! is set at all the appropriate levels.
!
! NOTE: currently, the use of the argument ilev is not "safe" and is reserved to
! MLD2P4 developers. Indeed, by using ilev it is possible to set different values
! of the same parameter at different levels 1,...,nlev-1, even in cases where
! the parameter must have the same value at all the levels but the coarsest one.
! For this reason, the interface mld_precset to this routine has been built in
! such a way that ilev is not visible to the user (see mld_prec_mod.f90).
!
subroutine mld_sprecsetc(p,what,string,info,ilev)
use psb_base_mod
use mld_s_prec_mod, mld_protect_name => mld_sprecsetc
implicit none
! Arguments
class(mld_sprec_type), intent(inout) :: p
integer(psb_ipk_), intent(in) :: what
character(len=*), intent(in) :: string
integer(psb_ipk_), intent(out) :: info
integer(psb_ipk_), optional, intent(in) :: ilev
! Local variables
integer(psb_ipk_) :: ilev_, nlev_,val
character(len=*), parameter :: name='mld_precsetc'
info = psb_success_
if (.not.allocated(p%precv)) then
info = 3111
return
endif
nlev_ = size(p%precv)
if (present(ilev)) then
ilev_ = ilev
else
ilev_ = 1
end if
if ((ilev_<1).or.(ilev_ > nlev_)) then
write(psb_err_unit,*) name,&
& ': Error: invalid ILEV/NLEV combination',ilev_, nlev_
info = -1
return
endif
val = mld_stringval(string)
if (val >=0) call p%set(what,val,info,ilev=ilev)
end subroutine mld_sprecsetc
!
! Subroutine: mld_sprecsetr
! Version: real
!
! This routine sets the real parameters defining the preconditioner. More
! precisely, the real parameter identified by 'what' is assigned the value
! contained in 'val'.
! For the multilevel preconditioners, the levels are numbered in increasing
! order starting from the finest one, i.e. level 1 is the finest level.
!
! To set integer and character parameters, see mld_sprecseti and mld_sprecsetc,
! respectively.
!
! Arguments:
! p - type(mld_sprec_type), input/output.
! The preconditioner data structure.
! what - integer, input.
! The number identifying the parameter to be set.
! A mnemonic constant has been associated to each of these
! numbers, as reported in the MLD2P4 User's and Reference Guide.
! val - real(psb_spk_), input.
! The value of the parameter to be set. The list of allowed
! values is reported in the MLD2P4 User's and Reference Guide.
! info - integer, output.
! Error code.
! ilev - integer, optional, input.
! For the multilevel preconditioner, the level at which the
! preconditioner parameter has to be set.
! If nlev is not present, the parameter identified by 'what'
! is set at all the appropriate levels.
!
! NOTE: currently, the use of the argument ilev is not "safe" and is reserved to
! MLD2P4 developers. Indeed, by using ilev it is possible to set different values
! of the same parameter at different levels 1,...,nlev-1, even in cases where
! the parameter must have the same value at all the levels but the coarsest one.
! For this reason, the interface mld_precset to this routine has been built in
! such a way that ilev is not visible to the user (see mld_prec_mod.f90).
!
subroutine mld_sprecsetr(p,what,val,info,ilev)
use psb_base_mod
use mld_s_prec_mod, mld_protect_name => mld_sprecsetr
implicit none
! Arguments
class(mld_sprec_type), intent(inout) :: p
integer(psb_ipk_), intent(in) :: what
real(psb_spk_), intent(in) :: val
integer(psb_ipk_), intent(out) :: info
integer(psb_ipk_), optional, intent(in) :: ilev
! Local variables
integer(psb_ipk_) :: ilev_,nlev_
character(len=*), parameter :: name='mld_precsetr'
info = psb_success_
if (present(ilev)) then
ilev_ = ilev
else
ilev_ = 1
end if
if (.not.allocated(p%precv)) then
write(psb_err_unit,*) name,&
&': Error: uninitialized preconditioner,',&
&' should call MLD_PRECINIT'
info = 3111
return
endif
nlev_ = size(p%precv)
if ((ilev_<1).or.(ilev_ > nlev_)) then
write(psb_err_unit,*) name,&
& ': Error: invalid ILEV/NLEV combination',&
& ilev_, nlev_
info = -1
return
endif
!
! Set preconditioner parameters at level ilev.
!
if (present(ilev)) then
call p%precv(ilev_)%set(what,val,info)
else if (.not.present(ilev)) then
!
! ilev not specified: set preconditioner parameters at all the appropriate levels
!
select case(what)
case(mld_coarse_iluthrs_)
ilev_=nlev_
call p%precv(ilev_)%set(mld_sub_iluthrs_,val,info)
case default
do ilev_=1,nlev_
call p%precv(ilev_)%set(what,val,info)
end do
end select
endif
end subroutine mld_sprecsetr