You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
amg4psblas/mlprec/impl/mld_scprecset.F90

541 lines
18 KiB
Fortran

!!$
!!$
!!$ MLD2P4 version 2.0
!!$ MultiLevel Domain Decomposition Parallel Preconditioners Package
!!$ based on PSBLAS (Parallel Sparse BLAS version 3.3)
!!$
!!$ (C) Copyright 2008, 2010, 2012, 2015
!!$
!!$ Salvatore Filippone University of Rome Tor Vergata
!!$ Alfredo Buttari CNRS-IRIT, Toulouse
!!$ Pasqua D'Ambra ICAR-CNR, Naples
!!$ Daniela di Serafino Second University of Naples
!!$
!!$ Redistribution and use in source and binary forms, with or without
!!$ modification, are permitted provided that the following conditions
!!$ are met:
!!$ 1. Redistributions of source code must retain the above copyright
!!$ notice, this list of conditions and the following disclaimer.
!!$ 2. Redistributions in binary form must reproduce the above copyright
!!$ notice, this list of conditions, and the following disclaimer in the
!!$ documentation and/or other materials provided with the distribution.
!!$ 3. The name of the MLD2P4 group or the names of its contributors may
!!$ not be used to endorse or promote products derived from this
!!$ software without specific written permission.
!!$
!!$ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
!!$ ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
!!$ TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
!!$ PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE MLD2P4 GROUP OR ITS CONTRIBUTORS
!!$ BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
!!$ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
!!$ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
!!$ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
!!$ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
!!$ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
!!$ POSSIBILITY OF SUCH DAMAGE.
!!$
!!$
! File: mld_sprecset.f90
!
! Subroutine: mld_sprecseti
! Version: real
!
! This routine sets the integer parameters defining the preconditioner. More
! precisely, the integer parameter identified by 'what' is assigned the value
! contained in 'val'.
! For the multilevel preconditioners, the levels are numbered in increasing
! order starting from the finest one, i.e. level 1 is the finest level.
!
! To set character and real parameters, see mld_sprecsetc and mld_sprecsetr,
! respectively.
!
!
! Arguments:
! p - type(mld_sprec_type), input/output.
! The preconditioner data structure.
! what - integer, input.
! The number identifying the parameter to be set.
! A mnemonic constant has been associated to each of these
! numbers, as reported in the MLD2P4 User's and Reference Guide.
! val - integer, input.
! The value of the parameter to be set. The list of allowed
! values is reported in the MLD2P4 User's and Reference Guide.
! info - integer, output.
! Error code.
! ilev - integer, optional, input.
! For the multilevel preconditioner, the level at which the
! preconditioner parameter has to be set.
! If nlev is not present, the parameter identified by 'what'
! is set at all the appropriate levels.
!
! NOTE: currently, the use of the argument ilev is not "safe" and is reserved to
! MLD2P4 developers. Indeed, by using ilev it is possible to set different values
! of the same parameter at different levels 1,...,nlev-1, even in cases where
! the parameter must have the same value at all the levels but the coarsest one.
! For this reason, the interface mld_precset to this routine has been built in
! such a way that ilev is not visible to the user (see mld_prec_mod.f90).
!
subroutine mld_scprecseti(p,what,val,info,ilev,pos)
use psb_base_mod
use mld_s_prec_mod, mld_protect_name => mld_scprecseti
use mld_s_jac_smoother
use mld_s_as_smoother
use mld_s_diag_solver
use mld_s_ilu_solver
use mld_s_id_solver
use mld_s_gs_solver
#if defined(HAVE_SLU_)
use mld_s_slu_solver
#endif
#if defined(HAVE_MUMPS_)
use mld_s_mumps_solver
#endif
implicit none
! Arguments
class(mld_sprec_type), intent(inout) :: p
character(len=*), intent(in) :: what
integer(psb_ipk_), intent(in) :: val
integer(psb_ipk_), intent(out) :: info
integer(psb_ipk_), optional, intent(in) :: ilev
character(len=*), optional, intent(in) :: pos
! Local variables
integer(psb_ipk_) :: ilev_, nlev_
character(len=*), parameter :: name='mld_precseti'
info = psb_success_
if (.not.allocated(p%precv)) then
info = 3111
write(psb_err_unit,*) name,&
& ': Error: uninitialized preconditioner,',&
&' should call MLD_PRECINIT'
return
endif
nlev_ = size(p%precv)
if (present(ilev)) then
ilev_ = ilev
else
ilev_ = 1
end if
if ((ilev_<1).or.(ilev_ > nlev_)) then
info = -1
write(psb_err_unit,*) name,&
&': Error: invalid ILEV/NLEV combination',ilev_, nlev_
return
endif
select case(psb_toupper(what))
case ('COARSE_AGGR_SIZE')
p%coarse_aggr_size = max(val,-1)
return
case ('N_PREC_LEVS')
p%n_prec_levs = max(val,1)
return
case('MAX_PREC_LEVS')
p%max_prec_levs = max(val,1)
return
case ('OUTER_SWEEPS')
p%outer_sweeps = max(val,1)
return
end select
!
! Set preconditioner parameters at level ilev.
!
if (present(ilev)) then
if (ilev_ == 1) then
!
! Rules for fine level are slightly different.
!
call p%precv(ilev_)%set(what,val,info,pos=pos)
else if (ilev_ > 1) then
select case(psb_toupper(what))
case('SMOOTHER_TYPE','SUB_SOLVE','SMOOTHER_SWEEPS',&
& 'ML_TYPE','AGGR_ALG','AGGR_ORD',&
& 'AGGR_KIND','SMOOTHER_POS','AGGR_OMEGA_ALG',&
& 'AGGR_EIG','SMOOTHER_SWEEPS_PRE',&
& 'SMOOTHER_SWEEPS_POST',&
& 'SUB_RESTR','SUB_PROL', &
& 'SUB_REN','SUB_OVR','SUB_FILLIN',&
& 'COARSE_MAT')
call p%precv(ilev_)%set(what,val,info,pos=pos)
case('COARSE_SUBSOLVE')
if (ilev_ /= nlev_) then
write(psb_err_unit,*) name,&
& ': Error: Inconsistent specification of WHAT vs. ILEV'
info = -2
return
end if
call p%precv(ilev_)%set('SUB_SOLVE',val,info,pos=pos)
case('COARSE_SOLVE')
if (ilev_ /= nlev_) then
write(psb_err_unit,*) name,&
& ': Error: Inconsistent specification of WHAT vs. ILEV'
info = -2
return
end if
if (nlev_ > 1) then
call p%precv(nlev_)%set('COARSE_SOLVE',val,info,pos=pos)
select case (val)
case(mld_bjac_)
call p%precv(nlev_)%set('SMOOTHER_TYPE',mld_bjac_,info,pos=pos)
#if defined(HAVE_SLU_)
call p%precv(nlev_)%set('SUB_SOLVE',mld_slu_,info,pos=pos)
#elif defined(HAVE_MUMPS_)
call p%precv(nlev_)%set('SUB_SOLVE',mld_mumps_,info,pos=pos)
#else
call p%precv(nlev_)%set('SUB_SOLVE',mld_ilu_n_,info,pos=pos)
#endif
call p%precv(nlev_)%set('COARSE_MAT',mld_distr_mat_,info)
case(mld_umf_, mld_slu_,mld_ilu_n_, mld_ilu_t_,mld_milu_n_)
call p%precv(nlev_)%set('SMOOTHER_TYPE',mld_bjac_,info,pos=pos)
call p%precv(nlev_)%set('SUB_SOLVE',val,info,pos=pos)
call p%precv(nlev_)%set('COARSE_MAT',mld_repl_mat_,info,pos=pos)
case(mld_sludist_,mld_mumps_)
call p%precv(nlev_)%set('SMOOTHER_TYPE',mld_bjac_,info,pos=pos)
call p%precv(nlev_)%set('SUB_SOLVE',val,info,pos=pos)
call p%precv(nlev_)%set('COARSE_MAT',mld_distr_mat_,info,pos=pos)
case(mld_jac_)
call p%precv(nlev_)%set('SMOOTHER_TYPE',mld_bjac_,info,pos=pos)
call p%precv(nlev_)%set('SUB_SOLVE',mld_diag_scale_,info,pos=pos)
call p%precv(nlev_)%set('COARSE_MAT',mld_distr_mat_,info,pos=pos)
end select
endif
case('COARSE_SWEEPS')
if (ilev_ /= nlev_) then
write(psb_err_unit,*) name,&
& ': Error: Inconsistent specification of WHAT vs. ILEV'
info = -2
return
end if
call p%precv(nlev_)%set('SMOOTHER_SWEEPS',val,info,pos=pos)
case('COARSE_FILLIN')
if (ilev_ /= nlev_) then
write(psb_err_unit,*) name,&
& ': Error: Inconsistent specification of WHAT vs. ILEV'
info = -2
return
end if
call p%precv(nlev_)%set('SUB_FILLIN',val,info,pos=pos)
case default
call p%precv(ilev_)%set(what,val,info,pos=pos)
end select
endif
else if (.not.present(ilev)) then
!
! ilev not specified: set preconditioner parameters at all the appropriate
! levels
!
select case(psb_toupper(trim(what)))
case('SUB_SOLVE','SUB_RESTR','SUB_PROL',&
& 'SUB_REN','SUB_OVR','SUB_FILLIN',&
& 'SMOOTHER_SWEEPS','SMOOTHER_TYPE')
do ilev_=1,max(1,nlev_-1)
call p%precv(ilev_)%set(what,val,info,pos=pos)
if (info /= 0) return
end do
case('ML_TYPE','AGGR_ALG','AGGR_ORD','AGGR_KIND',&
& 'SMOOTHER_SWEEPS_PRE','SMOOTHER_SWEEPS_POST',&
& 'SMOOTHER_POS','AGGR_OMEGA_ALG',&
& 'AGGR_EIG','AGGR_FILTER')
do ilev_=1,nlev_
call p%precv(ilev_)%set(what,val,info,pos=pos)
if (info /= 0) return
end do
case('COARSE_MAT')
if (nlev_ > 1) then
call p%precv(nlev_)%set('COARSE_MAT',val,info,pos=pos)
end if
case('COARSE_SOLVE')
if (nlev_ > 1) then
call p%precv(nlev_)%set('COARSE_SOLVE',val,info,pos=pos)
select case (val)
case(mld_bjac_)
call p%precv(nlev_)%set('SMOOTHER_TYPE',mld_bjac_,info,pos=pos)
#if defined(HAVE_SLU_)
call p%precv(nlev_)%set('SUB_SOLVE',mld_slu_,info,pos=pos)
#elif defined(HAVE_MUMPS_)
call p%precv(nlev_)%set('SUB_SOLVE',mld_mumps_,info,pos=pos)
#else
call p%precv(nlev_)%set('SUB_SOLVE',mld_ilu_n_,info,pos=pos)
#endif
call p%precv(nlev_)%set('COARSE_MAT',mld_distr_mat_,info)
case(mld_umf_, mld_slu_,mld_ilu_n_, mld_ilu_t_,mld_milu_n_)
call p%precv(nlev_)%set('SMOOTHER_TYPE',mld_bjac_,info,pos=pos)
call p%precv(nlev_)%set('SUB_SOLVE',val,info,pos=pos)
call p%precv(nlev_)%set('COARSE_MAT',mld_repl_mat_,info,pos=pos)
case(mld_sludist_,mld_mumps_)
call p%precv(nlev_)%set('SMOOTHER_TYPE',mld_bjac_,info,pos=pos)
call p%precv(nlev_)%set('SUB_SOLVE',val,info,pos=pos)
call p%precv(nlev_)%set('COARSE_MAT',mld_distr_mat_,info,pos=pos)
case(mld_jac_)
call p%precv(nlev_)%set('SMOOTHER_TYPE',mld_bjac_,info,pos=pos)
call p%precv(nlev_)%set('SUB_SOLVE',mld_diag_scale_,info,pos=pos)
call p%precv(nlev_)%set('COARSE_MAT',mld_distr_mat_,info,pos=pos)
end select
endif
case('COARSE_SUBSOLVE')
if (nlev_ > 1) then
call p%precv(nlev_)%set('SUB_SOLVE',val,info,pos=pos)
endif
case('COARSE_SWEEPS')
if (nlev_ > 1) then
call p%precv(nlev_)%set('SMOOTHER_SWEEPS',val,info,pos=pos)
end if
case('COARSE_FILLIN')
if (nlev_ > 1) then
call p%precv(nlev_)%set('SUB_FILLIN',val,info,pos=pos)
end if
case default
do ilev_=1,nlev_
call p%precv(ilev_)%set(what,val,info,pos=pos)
end do
end select
endif
end subroutine mld_scprecseti
!
! Subroutine: mld_sprecsetc
! Version: real
!
! This routine sets the character parameters defining the preconditioner. More
! precisely, the character parameter identified by 'what' is assigned the value
! contained in 'val'.
! For the multilevel preconditioners, the levels are numbered in increasing
! order starting from the finest one, i.e. level 1 is the finest level.
!
! To set integer and real parameters, see mld_sprecseti and mld_sprecsetr,
! respectively.
!
!
! Arguments:
! p - type(mld_sprec_type), input/output.
! The preconditioner data structure.
! what - integer, input.
! The number identifying the parameter to be set.
! A mnemonic constant has been associated to each of these
! numbers, as reported in the MLD2P4 User's and Reference Guide.
! string - character(len=*), input.
! The value of the parameter to be set. The list of allowed
! values is reported in the MLD2P4 User's and Reference Guide.
! info - integer, output.
! Error code.
! ilev - integer, optional, input.
! For the multilevel preconditioner, the level at which the
! preconditioner parameter has to be set.
! If nlev is not present, the parameter identified by 'what'
! is set at all the appropriate levels.
!
! NOTE: currently, the use of the argument ilev is not "safe" and is reserved to
! MLD2P4 developers. Indeed, by using ilev it is possible to set different values
! of the same parameter at different levels 1,...,nlev-1, even in cases where
! the parameter must have the same value at all the levels but the coarsest one.
! For this reason, the interface mld_precset to this routine has been built in
! such a way that ilev is not visible to the user (see mld_prec_mod.f90).
!
subroutine mld_scprecsetc(p,what,string,info,ilev,pos)
use psb_base_mod
use mld_s_prec_mod, mld_protect_name => mld_scprecsetc
implicit none
! Arguments
class(mld_sprec_type), intent(inout) :: p
character(len=*), intent(in) :: what
character(len=*), intent(in) :: string
integer(psb_ipk_), intent(out) :: info
integer(psb_ipk_), optional, intent(in) :: ilev
character(len=*), optional, intent(in) :: pos
! Local variables
integer(psb_ipk_) :: ilev_, nlev_,val
character(len=*), parameter :: name='mld_precsetc'
info = psb_success_
if (.not.allocated(p%precv)) then
info = 3111
return
endif
nlev_ = size(p%precv)
if (present(ilev)) then
ilev_ = ilev
else
ilev_ = 1
end if
if ((ilev_<1).or.(ilev_ > nlev_)) then
write(psb_err_unit,*) name,&
& ': Error: invalid ILEV/NLEV combination',ilev_, nlev_
info = -1
return
endif
val = mld_stringval(string)
if (val >=0) then
call p%set(what,val,info,ilev=ilev,pos=pos)
else
call p%precv(ilev_)%set(what,string,info,pos=pos)
end if
end subroutine mld_scprecsetc
!
! Subroutine: mld_sprecsetr
! Version: real
!
! This routine sets the real parameters defining the preconditioner. More
! precisely, the real parameter identified by 'what' is assigned the value
! contained in 'val'.
! For the multilevel preconditioners, the levels are numbered in increasing
! order starting from the finest one, i.e. level 1 is the finest level.
!
! To set integer and character parameters, see mld_sprecseti and mld_sprecsetc,
! respectively.
!
! Arguments:
! p - type(mld_sprec_type), input/output.
! The preconditioner data structure.
! what - integer, input.
! The number identifying the parameter to be set.
! A mnemonic constant has been associated to each of these
! numbers, as reported in the MLD2P4 User's and Reference Guide.
! val - real(psb_spk_), input.
! The value of the parameter to be set. The list of allowed
! values is reported in the MLD2P4 User's and Reference Guide.
! info - integer, output.
! Error code.
! ilev - integer, optional, input.
! For the multilevel preconditioner, the level at which the
! preconditioner parameter has to be set.
! If nlev is not present, the parameter identified by 'what'
! is set at all the appropriate levels.
!
! NOTE: currently, the use of the argument ilev is not "safe" and is reserved to
! MLD2P4 developers. Indeed, by using ilev it is possible to set different values
! of the same parameter at different levels 1,...,nlev-1, even in cases where
! the parameter must have the same value at all the levels but the coarsest one.
! For this reason, the interface mld_precset to this routine has been built in
! such a way that ilev is not visible to the user (see mld_prec_mod.f90).
!
subroutine mld_scprecsetr(p,what,val,info,ilev,pos)
use psb_base_mod
use mld_s_prec_mod, mld_protect_name => mld_scprecsetr
implicit none
! Arguments
class(mld_sprec_type), intent(inout) :: p
character(len=*), intent(in) :: what
real(psb_spk_), intent(in) :: val
integer(psb_ipk_), intent(out) :: info
integer(psb_ipk_), optional, intent(in) :: ilev
character(len=*), optional, intent(in) :: pos
! Local variables
integer(psb_ipk_) :: ilev_,nlev_
real(psb_spk_) :: thr
character(len=*), parameter :: name='mld_precsetr'
info = psb_success_
if (present(ilev)) then
ilev_ = ilev
else
ilev_ = 1
end if
select case(psb_toupper(what))
case ('MIN_AGGR_RATIO')
p%min_aggr_ratio = max(sone,val)
return
end select
if (.not.allocated(p%precv)) then
write(psb_err_unit,*) name,&
&': Error: uninitialized preconditioner,',&
&' should call MLD_PRECINIT'
info = 3111
return
endif
nlev_ = size(p%precv)
if ((ilev_<1).or.(ilev_ > nlev_)) then
write(psb_err_unit,*) name,&
& ': Error: invalid ILEV/NLEV combination',&
& ilev_, nlev_
info = -1
return
endif
!
! Set preconditioner parameters at level ilev.
!
if (present(ilev)) then
call p%precv(ilev_)%set(what,val,info,pos=pos)
else if (.not.present(ilev)) then
!
! ilev not specified: set preconditioner parameters at all the appropriate levels
!
select case(psb_toupper(what))
case('COARSE_ILUTHRS')
ilev_=nlev_
call p%precv(ilev_)%set('SUB_ILUTHRS',val,info,pos=pos)
case('AGGR_THRESH')
thr = val
do ilev_ = 2, nlev_
call p%precv(ilev_)%set('AGGR_THRESH',thr,info,pos=pos)
thr = thr * p%precv(ilev_)%parms%aggr_scale
end do
case default
do ilev_=1,nlev_
call p%precv(ilev_)%set(what,val,info,pos=pos)
end do
end select
endif
end subroutine mld_scprecsetr